|
| 1 | Part A Civil Works |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm |
| 3 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints. Glazed Vitrified tiles Matt / Anti skid finish of Size of Tile 600x600 mm |
| 4 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all coloursand shade, in Walls, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints. Size of Tile 600x600 mm |
| 5 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | Using Dr fixit 301 pidicrete URP in Cement concrete to control seepage in roofs and wall as per instruction of E/I |
| 8 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 9 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice additives (maximum toxicity index of 12 for 100 gms)husk/wheat husk) and non toxic having minimum density of 650 kg/cum and screw having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 30 mm thick |
| 10 | Providing, laying and fixing P.V.C.pipe of 110 mm dia with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same as directed etc. complete |
| 11 | Providing, laying and fixingP.V.C.pipe of75 mm dia with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same as directed etc. complete |
| 12 | Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating, bend, connecting piece of UPVC pipe upto the outside face of wall, making the good damaged surface and testing etc. complete (Prior approval of sample and brand by E/I) |
| 13 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete as per instruction of E/I |
| 14 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 15 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of material i/c malba, all complete as per the direction of E/I. Orissa pattern W.C Pan of size 580x440 mm |
| 16 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid |
| 17 | Providing and fixing white glazed urinal with Press maticauto closing valve having flow rate upto 4.0Litr / Minuteof Jaquar / Cera / Hindware / Perryware or equivalent make with P.V.C.waste pipe with fitting arrangement etc. complete as directed by Engineer in charge. (Make shall conform to manufacturer\"s Green product and shall get approved from the Engineer In Charge.) |
| 18 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C.automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc.wherever required Single squatting plate with 5 litre P.V.C. automatic flushing cistern |
| 19 | Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets / union nut etc. complete as directed by Engineer in charge. |
| 20 | Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets / union nut etc. complete as directed by Engineer in charge. |
| 21 | Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms |
| 22 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length. 15 mm nominal bore 45 cm length |
| 23 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 24 | Provding Soap liquid dispenser of approved quality in WC / Toilet as per direction of Engg In charge |
| 25 | Providing and laying gang saw cut 18 mm thick, mirror polished premoulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade,colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge With granite stone of area less than 0.50 sqm. |
| 26 | Providing and fixing Sintex / Bajaj or equivalent make of ISI marked PVC false ceiling (or wall Panelling) on MS rectangular hollow section 38 mm x 25 mm fixed to wall with PVC roll plugs and main runner & intermediate section of MS square tube 25 mm x 25 mm duly coated with anticorrosive primer & ceiling panel made out of rigid PVC multichamber hollow plastic section of 6 mm thick as per instruction of Engg-in-charge |
| 27 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 28 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 29 | Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge |
| 30 | Providing and fixing PTMT 15 mm Urinal spreader size 95 x 69 x 100 mm with 1/2\" BSP thread and shapes, weighing not less than 60 gms |
| 31 | Providing and fixing on walls / ceiling / floor 20 mm dia CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete including removing existing pipeline if necessary and conveying and stacking the same as directed etc. complete. |
| 32 | Providing and fixing on walls / ceiling / floor 25 mm dia CPVC pipewith necessary fittings, remaking good the demolished portion etc complete including removing existing pipeline if necessary and conveying and stacking the same in as directed etc. complete. |
| 33 | Providing and fixingon walls / ceiling / floor 15 mm dia CPVC pipe with necessary fittings, remaking good the demolished portion etc complete including removing existing pipeline if necessary and conveying and stacking the same in as directed etc. complete. |
| 34 | Providing and fixing on walls / ceiling / floor 50 mm dia CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete |
| 35 | Providing, laying and fixing P.V.C. pipe of 40 mm dia with fittings such as bends, tees, reducers, clamps etc including necessary excavation, trench filling etc. complete including removing existing pipeline if necessary and conveying and stacking the same as directed etc. complete |
| 36 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand) |
| 37 | Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper, shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge |
| 38 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 39 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer |
| 40 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required said and colour complete to give and even said. Old work (one or more coats) |
| 41 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 42 | Providing Dustbin of capacity 120 L with wheels of Nilkamal or equivalent make as per instruction of E/I |
| 43 | Providing round Stainless Steel Dustbin of capacity 5 L with Peddle of Grassland / Robustt or equivalent make as per instruction of E/I |
| 44 | Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessories complete |
| 45 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 46 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 47 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Hot rolled deformed bars |
| 48 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 49 | Providing , laying and fixing , jointing Eco-drain 160 mm SN 4 Nu - Drain Upvc pipes of equivalent make, manufactured as per EN 13476 or equivalent as per IS 15328 with fittings such as bends, tees, coupler etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete |
| 50 | Detection of Source of water leakage / seepage on wall, roof slab surface etc with infrared instrument |
| 51 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 52 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge : For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 53 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge : With float glass panes of 4.0 mm thickness (weight not less than 10kg / sqm) |
| 54 | Providing & fixing Precast FRP cover of size 900 mm * 600 mm and 5 Te capacity over drains as per direction of Engg In charge |
| 55 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 56 | Providing and fixing Oval Type Under Counter Wash Hand Basin of 420x590x195 mm size with pillar cock, C.P. Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection upto the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, etc. Complete as directed by Engineer in charge. |
| 57 | Providing & fixing Toilet partion of size 900 mm * 1500 mm with 12 mm thick HPL sheet as per direction of Engg In charge |
| 58 | Providing and fixing white european type wall-hung pan, of size 350 mm x 355 mm x 570 mm concealed flush tank with floor mounting frame installing kit and drain pipe connection set fo rwall hung WC, with approved make square control plates including soil pipe, vent pipe upto the outside face of wall, 100 mm dia C.I.plug bend inlet pipe all fittings, cutting & making good walls, floors etc. complete. |
| 59 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 60 | Providing & fixing ACP Laminated Doors for bathroom of required size 20-25 mm thick with minimum frame thickness of 1.5 mm as per direction of Engg In charge |
| 61 | Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete |
| 62 | Miscellaneous works like shifting of materials from Bathroom and placing in safe place and re shifting to bathroom and organizing etc as per instruction of E/I |
| 63 | Carriage of Building rubbish / malba / similar unserviceable or waste materials by mechanical means including loading, unloading, transporting and unloading the same at different dump yard as per instruction of E/I. Avg lead of 10 km |
| 64 | Part B Electrical Works |
| 65 | Dismantling the existing light, fan, bell, clock, independent plug point,wiring including circuit mains of all types along with accessories etc. completeas per specification no. WG-DM/PW |
| 66 | Dismantling the existing ceiling fan /exhaust fan / cabin fan / bracket fancomplete with accessories, G.I. down rod, frame etc. and making the site clear. |
| 67 | Point wiring for light/bell concealed type in min 20 mm HMS PVC conduitwith 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch,earthing and required accessories as per specification no. WG-PW/CW |
| 68 | Supplying and erecting LED square / circular Max. 18 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficiency of 110lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5kV, Life class of 50,000 Hrs at L70B0 including driver, having mounting arrangement with board for surface type or spring loaded mounting clipscomplete with minimum 2 years warranty as per specification No. FG-IDF/LED. |
| 69 | Point wiring for light/bell/exhaust fan in minimum 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SW |
| 70 | Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessarymaterials. Fan motor with moisture proof treatment and ‘E’ class insulation |
| 71 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly flushed to wall with requiredchiselling and finishing with cement mortar / POP as per required to match thebackground. |
| 72 | Supplying and erecting modular type switch 6A/10A on provided plate and box with wiring connections complete. |
| 73 | Supplying and erecting modular type 3 pin 6A multi socket with safetyshutter on provided plate and box with wiring connections complete. |
| 74 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
