|
| 1 | Excavation in trenches in Hard/dense soil not exc 1.5m wide & not exc 1.5 deep and getting out for replacement (taking down existing pipe and re-laying of new pipe) of pipe complete all as specified and directed. (Taking out existing pipe and laying of new pipe shall be measured and paid separately under respective item here-in- after). |
| 2 | Removing excavated material outside MDn.exc 50m and depositing where directed at a level in n.exc 1.5m above the starting point in soil complete all as specified and directed. |
| 3 | Returning fillingin including spreading , levelling watering and wellramming in layers not exceeding 25cm complete all as specified and directed. |
| 4 | Supply and laying 20 mm dia galvanized tubing ,medium grade with all fittings specials laid in trenches including taking down old GI tubing with fittings complete all as specified and directed. Note:Excavation and earth work will be measure and paid separately |
| 5 | All as per item No. 4 above but 25mm dia bore of pipe |
| 6 | All as per item No. 4 above but 40mm dia bore of pipe |
| 7 | All as per item No. 4 above but 50mm dia bore of pipe |
| 8 | All as per item No. 4 above but 80mm dia bore of pipe |
| 9 | Supply and fix in repair 15mm dia gun metal globe/gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed. |
| 10 | All as per item No. 9 above but 20mm dia |
| 11 | All as per item No. 9 above but 25mm dia |
| 12 | All as per item No. 9 above but 40mm dia |
| 13 | All as per item No. 9 above but 50mm dia |
| 14 | Opening the top of the sluice valve of size 80 mm dia carefully, taking out the gate & spindle, scraping/cleaning the gate both sides, cleaning/scraping of sluice valve body thoroughlyfrom inside, refixing / replacing the spindle, gate check nut and top of sluice valve including replacement of gland packing rope of suitable size & rubber gasketand Bolt,nut with washers necessary metalling ,grinding and leveling of the valve door seating etc complete all as specified and directed. Note:- Check nut and spindle shall be measured and paid separately under relevant items as supply only. |
| 15 | All as per item No. 14 above but 100mm dia bore |
| 16 | All as per item No. 14 above but 150mm dia bore |
| 17 | All as per item No. 14 above but 200mm dia bore |
| 18 | All as per item No. 14 above but 250mm dia bore |
| 19 | All as per item No. 14 above but 300mm dia bore |
| 20 | Supply only spindle stainless steel suitable for 80 mm dia CIsluice valve complete all as specified and directed. |
| 21 | Supply only spindle stainless steel suitable for 100 mm dia CIsluice valvecomplete all as specified and directed. |
| 22 | Supply only spindle stainless steel suitable for 150 dia CIsluice valve complete all as specified and directed. |
| 23 | Supply only spindle stainless steel suitable for 200 dia CIsluice valve complete all as specified and directed. |
| 24 | Supply only spindle stainless steel suitable for 250 dia CIsluice valve complete all as specified and directed. |
| 25 | Supply only spindle stainless steel suitable for 300 dia CIsluice valve complete all as specified and directed. |
| 26 | Supply only Gun metal check nut as per sample (Square/rectangle) for 80 mm dia CIsluice valvecomplete all as specified and directed. |
| 27 | Supply only Gun metal check nut as per sample (Square/rectangle) for 100 mm dia CIsluice valvecomplete all as specified and directed. |
| 28 | Supply only Gun metal check nut as per sample (Square/rectangle) for 150 mm dia CIsluice valve complete all as specified and directed. |
| 29 | Supply only Gun metal check nut as per sample (Square/rectangle) for 200 mm dia CIsluice valve complete all as specified and directed. |
| 30 | Supply only Gun metal check nut as per sample (Square/rectangle) for 250 mm dia CIsluice valve complete all as specified and directed. |
| 31 | Supply only Gun metal check nut as per sample (Square/rectangle) for 300 mm dia CIsluice valvecomplete all as specified and directed. |
| 32 | M&L for 80 mm dia spigot and socketed CI/DI pipe complete for repairs to leakage/repairs by using JCB/Poklane arrange sufficient manpower incl taking out pipe and spun yarn and M&L for run lead joint to arrest leakage/breakdown etc complete all as specified and directed. Note: Earth Work/PCC & CI/DI Specials shall be measured and paid separately under respective items. |
| 33 | All as per item No. 32 above but 100mm dia bore |
| 34 | All as per item No. 32 above but 150mm dia bore |
| 35 | All as per item No. 32 above but 200mm dia bore |
| 36 | All as per item No. 32 above but 250mm dia bore |
| 37 | All as per item No. 32 above but 300mm dia bore |
| 38 | All as per item No. 32 above but 350mm dia bore |
| 39 | All as per item No. 32 above but 400mm dia bore |
| 40 | All as per item No. 32 above but 450mm dia bore |
| 41 | All as per item No. 32 above but 500mm dia bore |
| 42 | S&F cast iron bends (any radius and angle) tappers any type (straight, bend, increasing, decreasing or double socket) Tee, piecessingle branch, “ Y” junction, double branch, cross ( all socket or socket spigot) collars, caps, caps & plugs of the sizeupto 150mm dia etc complete all as specified and directed. |
| 43 | S&F cast iron bends (any radius and angle) tappers any type (straight, bend, increasing, decreasing or double socket) Tee, piecessingle branch, “ Y” junction, double branch, cross ( all socket or socket spigot) collars, caps, caps & plugs of the sizefrom 200mm to 500mm dia etc complete all as specified and directed. |
| 44 | S&F double action flanged air release valve of size 80mm dia including taking down existing unserviceable ARV from the existing pipe line including replacement of bolt, nuts with washers and gasket complete all as specified and directed. |
| 45 | M&L for cutting of bituminous Road/floor/plinth protection for laying pipe not exceeding 1.5m width and not exceeding 1.5 depth, including refiling with excavated material and watering well ramming/compacting and making good top surface with PCC 1:2:4 100 mm thicktype B-0 using 12.5 graded stone aggregate etc complete all as specified and directed. (Note:- PCC shall be measured and paid separately under relevant items) |
| 46 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in filling mass concrete and making good distrubed surface etc complete all as specified and directed. |
| 47 | Carry out day to day rectification of water supply complaints like Leakage of water supply line any sizes, broken/Crack of the GI/CI/DI Pipes any sizes, replacement of unserviceable Gate valves, replacement of glandrope and rubber packing to any size of Sluice valves etc complete all as specified and directed. Note:(i)GI Fittings shall bemeasured and paid separately under relevant items as supply only. (ii) GI Pipe shall be measured and paid separately under relevant items. (iii)Excavation and earth work required in rectification of complaints shall be included in quoted rates.(iv)Materials and fittings used for rectify the complaints like Lead, Gate valves, gland rope, rubber packing, Shellac bottle, cotton thread etc shall bemeasured and paid separately under relevant items as supply only. (v)Pipe fitter with Helpers detailed by the contractor will report to MES complaint cell at 08.45 Hrs morning to receive complaints.(vi) Complaint slip duly printed (as per format) to be provided by the contractor for detailing of complaint to pipe fitter & helper by department and complaints should be rectified on same day. In case not rectification of complaints on same day, an amount of Rs- 600/- per day shall be recovered from contractor dues.(vi)Transport/vehicle shall be arrange by the contractor to attending the complaints. Amount for the same shall be deemed to be included in quoted rate. |
| 48 | Supply only GI Socket 20 mm dia complete all as specified and directed. |
| 49 | Supply only GI Union 20 mm dia complete all as specified and directed. |
| 50 | Supply only GI Elbow 20 mm dia complete all as specified and directed. |
| 51 | Supply only GI Socket 25 mm dia complete all as specified and directed. |
| 52 | Supply only GI Elbow 25 mm dia complete all as specified and directed. |
| 53 | Supply only GI Pipe Nipple 20 mm dia 3\" long complete all as specified and directed. |
| 54 | Supply only GI Pipe Nipple 20 mm dia 6\" long complete all as specified and directed. |
| 55 | Supply only GI Pipe Nipple 25 mm dia 3\" long complete all as specified and directed. |
| 56 | Supply only GI Pipe Nipple 25 mm dia 6\" long complete all as specified and directed. |
| 57 | Supply only GI Socket 40 mm dia complete all as specified and directed. |
| 58 | Supply only GI Union 40 mm dia complete all as specified and directed. |
| 59 | Supply only GI Elbow 40 mm dia complete all as specified and directed. |
| 60 | Supply only GI Socket 50 mm dia complete all as specified and directed. |
| 61 | Supply only GI Union 50 mm dia complete all as specified and directed. |
| 62 | Supply only GI Elbow 50 mm dia complete all as specified and directed. |
| 63 | Supply only GI Socket reducer 40x20 mm complete all as specified and directed. |
| 64 | Supply only GI Socket reducer 40x25 mm complete all as specified and directed. |
| 65 | Supply only GI Socket reducer 50x40 mm complete all as specified and directed. |
| 66 | Supply only GI Socket reducer 50x25 mm complete all as specified and directed. |
| 67 | Supply only GI Socket reducer 25x20 mm complete all as specified and directed. |
| 68 | Supply only GI Union 25 mm dia complete all as specified and directed. |
| 69 | Supply only Lead Pig complete all as specified and directed. |
| 70 | Supply only gland packing rope complete all as specified and directed. |
| 71 | Supply only GI plug 20mm complete all as specified and directed. |
| 72 | Supply only GI plug 25mm complete all as specified and directed. |
| 73 | Supply only GI plug 40mm complete all as specified and directed. |
| 74 | Supply only GI plug 50mm complete all as specified and directed. |
| 75 | Supply only lead wool complete all as specified and directed. |
| 76 | Supply only rubber packing sheet 2/4mm thick complete all as specified and directed. |
| 77 | Supply only Shellac Bottle 50 ML complete all as specified and directed. |
| 78 | Supply only Cotton thread complete all as specified and directed. |
| 79 | Supply only Gun metal handle valve 15 mm dia complete all as specified and directed. |
| 80 | Material & Labour for repair of valve chambers by using bricks works in cement morter 1:4 with and including rendering 10mm thick in cement morter 1:4 on fair face of brick work complete all as specified and directed. |
| 81 | S&F in repair iron foot valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed. |
| 82 | Taking down of existing unserviceable 80 mm dia/bore sluice valve from the existing pipe line & S&F new 80 mm dia/bore sluice valve made with CI body ISI marked class PN1.6 heavy duty flanged ends cast iron wheel with Brass spindle (ISI marked) conforming to IS : 14786 – 2000, short body all as specified including nuts ,bolt, washers and gasket etccomplete all as specified and directed.Note:Quoted rate shall be deemed to include for making good the damaged valve chamber. |
| 83 | Taking down of existing unserviceable 100 mm dia/bore sluice valve from the existing pipe line & S&F new 100 mm dia/bore sluice valve made with CI body ISI marked class PN1.6 heavy duty flanged ends cast iron wheel with Brass spindle (ISI marked) conforming to IS : 14786 – 2000, short body all as specified including nuts ,bolt, washers and gasket etccomplete all as specified and directed.Note:Quoted rate shall be deemed to include for making good the damaged valve chamber. |
| 84 | Taking down of existing unserviceable 150 mm dia/bore sluice valve from the existing pipe line & S&F new 150 mm dia/bore sluice valve made with CI body ISI marked class PN1.6 heavy duty flanged ends cast iron wheel with Brass spindle (ISI marked) conforming to IS : 14786 – 2000, short body all as specified including nuts ,bolt, washers and gasket etccomplete all as specified and directed.Note:Quoted rate shall be deemed to include for making good the damaged valve chamber. |
| 85 | M&L for construction of brick masonry valve pit chamber of size 900x900x1000 mm, with andincluding necessary earth work, PCC, copping, plastering on internal surface of valve pit,Framed work for the valve pit chamber cover made of MS sheet angle equal angle 40x40x5 mm and MS sheet 3 mm thick confirming to Fe410-o and Fe 310-o including welding cutting hinges locking arrangement complete and two coat of synthetic enamel paints over a coat of red oxide primer applied on the valve pit cover and frame all as per drawing and as specified and directed. |
| 86 | M&L for construction of brick masonry valve pit chamber of size 1200x1200x1000 mm, with andincluding necessary earth work, PCC, copping, plastering on internal surface of valve pit,Framed work for the valve pit chamber cover made of MS sheet angle equal angle 40x40x5 mm and MS sheet 3 mm thick confirming to Fe410-o and Fe 310-o including welding cutting hinges locking arrangement complete and two coat of synthetic enamel paints over a coat of red oxide primer applied on the valve pit cover and frame all as per drawing and as specified and directed. |
| 87 | M&L for construction of brick masonry valve pit chamber of size 1500x1500x1000mm, with andincluding necessary earth work, PCC, copping, plastering on internal surface of valve pit,Framed work for the valve pit chamber cover made of MS sheet angle equal angle 40x40x5 mm and MS sheet 3 mm thick confirming to Fe410-o and Fe 310-o including welding cutting hinges locking arrangement complete and two coat of synthetic enamel paints over a coat of red oxide primer applied on the valve pit cover and frame all as per drawing and as specified and directed. |
