Name of Work: Replacement of unserviceable plywood top from charpoy GI pipe and IP steel at Tibri Mil Stn under GE Gurdaspur.
Sl. No.
Item Description
1
CHARPOY GI PIPE WITH NEWARM&L for removing unserviceable nylon newar from charpoy GI pipe (FD-220) and supply and fix new 12 mm BWR phenol bonded commercial plywood of size 2000 mm x 900 mm including providing 50mm wide strip made out of 6mm thick plywood for filling gap between plywood sheet and short rails including replacement of bolts and nuts for fixing of plywood all as specified and directed.
2
M&L for removing of old/unserviceable GI check nut of 32mm dia and supply and fixing of GI check nut of 32mm ISI marked in position, tightening of all component (Complete Charpoy) complete all as specified and directed by Engineer-in-Charge wherever required.
3
M&L for removal of old/unserviceable threaded long rail from charpoy GI and supply and fixing new long rail made of GI tubing32mm bore(Med Grade) ISI marked complete all as specified and directed by Engineer-in-Charge wherever required.
4
M&L for removal of old/unserviceable threaded long rail from charpoy GI and supply and fixing in new long rail made of GI tubing32mm bore(Med Grade) ISI marked complete all as specified and directed by Engineer-in-Charge wherever required.
5
M&L for removal of old/unserviceable threaded leg from charpoy GI and supply and fixing of leg made from old short rail obtained from srl item No 04 above (with cap welded on bottom) dulythreaded one ends complete all as specified and didrected by Engineer-in-Charge.
6
M&L for removal of old/unserviceable GI elbow of 32mm dia bore 3 way and supply and fixing of GI elbow of 32mm bore 3 way ISI marked (weight of elbow not less than 450 gms) in position and also tightening of all component (complete charpoy) complete all as specified and directed by Engineer-in-Charge.
7
M&L for removing unserviceable rusted MS flat of charpoy GI pipe and replacing the same with new MS flat of size 40x4mm including one coat of red oxide paint and one coat of black synthetic enamel paint as directed.
8
M&L for removing unserviceable plywood from charpoy IP steel FD/MAP-II/01 and supply and fix new 12mm BWR phenol bonded commercial plywood of size 2000mm x 900mm including replacement of bolts and nuts for fixingof plywood with one coat of red oxide paint and one coat of black synethic enamel paint as directed all as specified and directed by Engineer-in-Charge.
9
A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender.The Schedule of Credit is pre-priced by MES.The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit Rs. 20,450/- from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
