|
| 1 | Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed. |
| 2 | Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed. |
| 3 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified. |
| 4 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts gradeISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches,including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-(Note- Modular cover plate of any module with all fittings are included in point wiring.) Contractor should make good even distributed wall/surface as before. |
| 5 | One light point controlled by one, one way switch 5 Amps |
| 6 | One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 7 | One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 8 | One bell point controlled by one, bell switch 5 Amps |
| 9 | One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 10 | Description all as per item No 4 here in before butusing 2.5 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of2.5 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 11 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc,heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-(Note- Modular cover plate of any module with all fittings are included in point wiring.) |
| 12 | One light point controlled by one, one way switch 5 Amps |
| 13 | One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 14 | One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 15 | One bell point controlled by one, bell switch 5 Amps |
| 16 | One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 17 | Description all as per item No 6 here in before butusing 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 18 | S & F Modular Switch piano flushtype, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 19 | S & F Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified. |
| 20 | S & FModular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 21 | S & FModular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 22 | S & F Modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 23 | S & F ceiling fan regulator socketed, step type, flush type heavy duty suitable to work on 230 volts AC supply including removal of old unserviceable one complete all as specified. |
| 24 | S & FBell push modular 6 Amps single module complete all as specified. |
| 25 | Supply and fix Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed |
| 26 | S & FLamp holder, PVC body suitable for batten fitting completes all as specified. |
| 27 | S & F Ceiling rose, surface Bakelite suitable ISImarked for batten fitting complete all as specified |
| 28 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing intoPVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size concealed in wall etcincluding one run ofPVC insulated 4.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 4.0 sqmm cable,one run of 4.0 sqmm cable and one run of PVC casing caping will be measured as one unit |
| 29 | M & L forSub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing intoPVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etcone run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC casing caping will be measured as one unit |
| 30 | S & Fsheet metal enclosure MCBDBTPN4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 31 | S & F sheet metal enclosure MCBDBSPN8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 32 | S & F sheet metal enclosure MCBDBSPN4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 33 | S & F sheet metal enclosure MCBDBSPN12 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 34 | S & F MCCBTPN415volts 25 KA suitable for fixing on DB of capacity 63 Amps with extended terminals and including taking down old u/s MCCB\"s complete all as specified and as directed. |
| 35 | S & F MCCBTPN415volts 25 KA suitable for fixing on DB of capacity 100Amps with extended terminalsand including taking down old u/s MCCB\"s complete all as specified and as directed. |
| 36 | Supply and fixing LED lights fitting 1x 40 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling roseand including taking down old u/s fittings complete all as specified and as directed. Make :-Bajaj, Philips, Havells. |
| 37 | S & F Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and including provision of LED bulb 10/12 wattsand including taking down old u/s fittings complete all as specified and as directed. Make-Havells, Philips, Bajaj. |
| 38 | S & F LED 10 watts batten aluminium extruded (mirror light) with decorative end capsand including taking down old u/s fittings complete all as specified and as directed. Make- Bajaj, Havells, Philips. |
| 39 | S & F forEnergy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired andnecessary mounting arrangements , provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb andincluding removal of old unserviceable one complete all as specified and as directed. Make :-Bajaj , Philips, Havells. |
| 40 | S & Ffor metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Ampsincluding removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed |
| 41 | S & F for MCB Single pole and neutral rated capacity 40-63 Amps, 240 volts breaking capacity 10 KA including removal of old unserviceable one complete all as specified and as directed. |
| 42 | S & FMCB Single pole rated capacity 5 to 32 Amps, 240 volts breaking capacity 10 KA including removal of old unserviceable onecomplete all as specified and as directed. |
| 43 | Supply and replacing 1100 volts grade heavy duty PVC insulated aluminium conductor, served with inner sheathing of PVC in service connections suspended by insulating hangers not more than 1 mtr apart including 4 mm dia GI suspension wire, one twin core cable of size 10 Sqmmmulti -strand complete all as specified and directed. |
| 44 | Description all as per ser item No 33 above but size 6 sqmm twin core cable. |
| 45 | Description all as per ser item No 33 above but size 4 sqmm twin core cable. |
| 46 | S&F Fan condenser, 2.5 Mfd, 240 volts for fan including PVC clamp at different locations as per site given & including removal of old unserviceable one complete all as specified and as directed by Engineer-in-Charge |
| 47 | S & F LED post top lantern (gate light) 40 watt light fitting made of cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection complete with all accessories fixed on GI pipe 50 mm dia including removal of old unserviceable one complete all as specified and directed. |
| 48 | Taking down u/s exahust fan checking andS & F metal body exhaust fan, AC single phase, 240 V of size 225 mm sweep 1380 rpm with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and M&L for making hole and proper finishing the surface as existing before complete all as specified and as directed. |
| 49 | Taking down old burnt electric single phase meter of any type, submitting it to MES Store and S/F new single phase electric meter 5-30 A in different locations |
| 50 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type ofsoil/strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 51 | Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roofceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete including removal of old unserviceable one complete all as specified and as directed Make:Bajaj, Philips, Havells |
| 52 | Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessaed type warm colour 3000k with highefficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roofceiling including connecting up with driver threecore flexible copper conductor cases of suitable size & including removal of old unserviceable one complete all as specified and as directed.Make:Bajaj, Philips, Havells |
| 53 | S & F Energy saving new generation environmental friendly long life versatile pressure die cast aluminium ip 66 for building security light fitting luminare with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangement and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting & including removal of old unserviceable one complete all as specified and as directed by Engineer-in-charge.Make:- Bajaj, Philips, Havells |
| 54 | Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. Exc 1.5 Sqm each |
| 55 | Description all as per ser item No 44 above item but exc1.5 Sqm but n.exc. 4 Sqm. |
| 56 | M&L Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.including (Minnimum thickness of powder coating 50 Micron) complete all as specified. |
| 57 | M&L powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.including (powder coating not less than 50 micron)complete all as specified. |
| 58 | M&L Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.)(Minnimum thickness of powder coating 50 Micron) completeallasspecified and directed |
| 59 | S&F Powder coated aluminium window/partition and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc.(Minnimum thickness of powder coating 50 Micron) complete all as specified and directed |
| 60 | S&F 4 lever brass mortice lock vertical type size 65mm long complete. |
| 61 | M&L 9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with aluminium frame. |
| 62 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples |
| 63 | S&F in repair 12mm thick Toughned glass as in hinged doors,partition automatic doors and similar work including cutting to shape,drilling holes, ss handles required complete all as specified and directed.(a) Stainless steel handle of size 450mm 25mm dia -02Nos (Both side in each shutters. (b) stainless steel over panel set /connecting patch with pivots on corners .(c) stainless steel L connector for wall and wall to glass-04 Nos in each shutter.(d) Stainless steel centre locks in each shutter. |
| 64 | S&F in repair 0.15mm thick PVC film (strip type plain and transparent) pasted on glasses with required adhesive complete all as specified and directed. |
| 65 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. |
| 66 | S&F 4.00 mm thick plain Sheet glass, area exc 0.5 sqm in each pane and fixed to aluminium frame worketc complete. |
| 67 | S&F 4.00 mm thick Figured glass,pin head type , area n exc 0.5 sqm in each pane and fixed to aluminium frame work complete. |
| 68 | Supply & fix in repairGalvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed . |
| 69 | Hacking out old broken glass (any thickness), size qualityor description from metal frames incl punching or drilling out glazing pins/springs clips and providing and fixing new ones glazed with putty or fixed with beads complete all as specified and directed . |
| 70 | Supply & fixin reapir 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane |
| 71 | Supply & fix in repair 3mm thick sheet glass, frosted type ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane |
| 72 | Supply & fix mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-410-0 or Fe-310-0. |
| 73 | S&F anodised aluminium Grill (anodised transparent or dyed to required shade according to IS:1868 with minimum adodic coating of grade AC 15) of approved design /pattern with approved standard section andfixed to the existing window frame with C.P.brass /stainless steel screw @ 200mm center to centre ,including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,all complete as per requirment and direction of engineer in charge all as specified and directed |
| 74 | Supply & fix 30mm thickflush shutter, solid core construction, with blockboard core and plywood face panels commercial type on both side complete all as specified and directed. |
| 75 | Supply & fix second class hard wood 35m thick glazed and skeleton factory made shutter for door open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, size members of shutters as specified in SSR Part-I Sec 8, Clause 8.24 (a) complete all as specified and directed . |
| 76 | Supply & fixing Mild steel helical door spring 300mm with roller and roller plate fixed with screws or welded to frame complete all as specified. |
| 77 | Supply & fix Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed . |
| 78 | Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed . |
| 79 | Supply & fix mild steel butt hinges 100mm size medium weight, cold rolled complete all as specified and directed. |
| 80 | Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified and directed. |
| 81 | Supply & fix 150mm long aluminiumanodized barrel tower bolt of extruded sectioncomplete all as specified and directed. |
| 82 | Supply & fix 250 mm long Aluminium alloy, Sliding door bolts, with hasp, staple and fixing clips of sheet, cast or extruded section and fixing bolts of extruded section or cast aluminium alloy complete all as specified & directed. |
| 83 | Supply & fix mild steelworkas in hold fast etc and similar articles confirming Fe-290 Gde E-165 complete all as specified & directed. |
| 84 | M&L PCC 1:3:6 type C1 using 20 mm grade stone aggregate as in hold fast etc |
| 85 | Taking down cement plaster on wallof any description incl racking out joints hacking for key and scrubbing down with water complete. |
| 86 | Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete. |
| 87 | M&L brick work with sub class \"B\" brick straight or curved on plan exc 6m means radius build in cement mortar 1:6 |
| 88 | M & L rendering 10 mm thick in cement mortar 1:6 on Wall/chajjas/lintel etc and finished even and fair without using extra cement in patches. |
| 89 | M & L rendering 15 mm thick in CM 1:4 inon surface of walls and finished even and fair (without using extra cement) in patches. |
| 90 | M & L preparation of new plastered surfaces nd finishing the surfaceof walls with wall putty and applying two coats of oil bound distemper overa coat of cement primer of, any colour complete all as specified & directed |
| 91 | M & L preparation of new plastered surfaces of walls and applying two coats of exterior emulsion Paint(Apex)overone coat of exterior primer, complete all as specified & directed |
| 92 | S&F in repair rollar blinds consisting of aluminium head rails vanes/louvers of 100mm wide of approved tint and traverse cord fixed in position complete all as specified and directed |
