|
| 1 | M&L for taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc., complete all as specified and directed. |
| 2 | M&L for rendering 10mm thick even and smooth (without using extra cement) in cement plaster 1:6 on fair faces of brick work or concrete surfaces, complete all as specified and directed |
| 3 | M&L for rendering 15mm thick even and fair (without using extra cement)in cement plaster 1:4 on fair faces of brick work or concrete surfacesusing WPC@ 2% of cement, complete all as specified and directed. |
| 4 | Supply only Integral waterproofing compound, complete all as specified and directed |
| 5 | M&L for rendering 5 mm thick even and smooth in cement plaster 1:3 on fair faces of brick work or concrete surfaces, complete all as specified and directed. |
| 6 | M&L for preparing new surfaces of walls, plastered or unplastered and applying two coat of oil bound distemper over 2 mm thick putty complete all as specified and directed. |
| 7 | M&L for preparing new surfaces of ceiling, plastered or unplastered and applying two coat of oil bound distemper putty complete all as specified and directed. |
| 8 | M&L for preparation on plastered or unplastered old decorated surface of ceiling incl pilasters and cornices etc incl washing, rubbing down and stopping the connected previously treated surfaces and applying two coat of oil emulsion distemper(tint as approved by GE), complete all as specified and directed. |
| 9 | M&L for preparation on plastered or unplastered old decorated surface of walls incl pilasters and cornices etc incl washing, rubbing down and stopping the connected previously treated surfaces and applying two coat of oil emulsion distemper(tint as approved by GE), complete all as specified and directed. |
| 10 | M&L for preparation of oldwoodensurfacesof any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 11 | M&L for preparation of oldwoodensurfacesof any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 12 | M&L for preparation old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 13 | M&L for preparation old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 14 | M&L for applying 2mm thick wall care putty of old/new decorated plastered or unplastered surface of wall complete all as specified and directed. |
| 15 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 16 | S&F for 0.63mm Galvanized, Corrugated Mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 120 GSM complete all as specified and directed. |
| 17 | S&F plain, galvanized, 0.63mm thick, class-2, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120GSM ,bent to shape as required, fixed with coach screws and washers in roofs and wall etc, complete all as specified and directed. |
| 18 | Dismantling wrought iron of mild steel work of any description not otherwise provided, complete all as specified and directed. |
| 19 | M&L for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed. |
| 20 | S&F for 0.80 mm thick mild steel, plain, black sheet in hearths, covering to door shutters, covering to door chowkats (frames), chullah hoods, water tanks, water troughs, ducts, urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitered angles, stopped ends, outlets etc. as required, complete all as specified and directed. |
| 21 | M&L for preparation of new steeland iron surfacesof any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 22 | M&L for preparation of new surface applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm, complete all as specified and directed. |
| 23 | M&L for preparation of old surface incl washing, rubbing down and stopping of distempered and painted surface andapplying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm, complete all as specified and directed. |
| 24 | M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and directed. |
| 25 | Removing weed vegetation, moss, small shrubs and rubbish material on chajjas, roofs, walls at any position and at any situation in ground floor, roof or in 2nd floor, ACC roof parapets and making good with cement plaster or surface finished as existing surface complete all as specified and directed. |
| 26 | M&L for preparation of old wooden polished surfaces with suitable sand paper/ emery paper, well dusted and cleaning the surfaces, filling holes with matching putty and applying PU wooden polish apply as per specification of the manufacturer, application process, finish and performance standard material should be of superior quality to achieve uniform smooth texture and high glossy finish to be done on furniture items such as sofas, Almirah, wooden bed, table dinning etc., complete all as specified and directed. |
| 27 | Removing existing old unserviceable/ worn out cushion and cloth from sofa/ chair and fixing of new cushion of existing size and thick foam with 40 density covered with cover of approved shade & quality of foam/ leather/ cloth should be as approved by Engr-in-Charge before commencement of the work, complete all as specified and directed. |
| 28 | Removing existing old unserviceable/ worn out cushion and cloth from sofa set 3 seater and fixing of new cushion of existing size and thick foam with 40 density covered with leatherette cover of approved shade & quality of foam/ leather/ cloth should be as approved by Engr-in-Charge before commencement of the work, complete all as specified and directed. |
