|
| 1 | Excavating in post holes in Soft/loose soil (or similar holes) eachn.exc. 0.5m cum, getting out, returning, filling in andramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distace n.exc. 50m and making good surface complete all as specified and directed. |
| 2 | M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 3 | M&L PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 4 | Excavating in Trenches in Soft/loose soil, n.exc 1.5m wide and n.exc 1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier hole, etc, n.exc 10 sq. m on plan and getting out complete all as specified and directed. |
| 5 | Returning, filling in including spreading, levelling, watering & well ramming in layers n.exc 25cm. |
| 6 | Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge. |
| 7 | Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc. |
| 8 | M&L for Brick Work with Sub Class `B` bricks, straight or curved on plan exc 6m mean radius, built with Cement Mortar (1:6), complete all as specified and directed. |
| 9 | M&L for Rendering 15mm thick with CM (1:4) on fair faces of brick work or concrete surfacec finished even and smooth (without using extra cement) complete all as specified and directed. |
| 10 | S & F of Mild steel work as in fencing posts and struts in fencing, fixed independently, including cuttingtop to shape and bend as directed,including all necessary welding, drilling for holes, notching for wire etc, flat iron fillets (for securing barberd wire and mesh etc,including all necessary drilling, bolting or reveting etc and similar work quality conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 11 | M&L forDismantling of Posts or struts (wood, steel or RCC) any section, embeded in concrete, bricks works masonry, etc of any section including taking out embeded portion and making good disturbed ground complete all as specified and directed. |
| 12 | M&L for Dismantlingof galvanised mild steel barbed wire from RCC or Iron Post of any size, section, including taking out from frame complete all as specified and directed. |
| 13 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provision of binding wire complete all as specified. |
| 14 | Supply only chain link MS galvanized fencing any size or type Complete all as specified. |
| 15 | S&F Mild steel round bar 10 mm dia and above cut to length bend to shape required,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to Gd.I, IS-432 (Part I) Part- I complete all as specified and directed. |
| 16 | S&F Mild steel Screw bolts (machine made) with hexagonal or squre head and one end screwed or screwed both ends each screwed ends to be fitted with washer and one hexagonal or squre nut, not exceeding 5 Cm long of 12 mm dia of shank Complete all as specified and directed. |
| 17 | M & L for preparation of new plastered surface of walls and applying two coat of exterior weather proof 100% anti fungal acrylic emulsion over a coat of exterior primer complete all as specified and directed. |
| 18 | M&L preparation of new or previously untreated steel surface of any description over 10 cm width or girth not otherwise described and applying twocoats of synthetic paint over a coat of red oxide zinc chrome primer all as specified. |
| 19 | M&L preparation of new or previously untreated steel surface of any discription over 10 cm width or girth not otherwise described and applying one coat ofblack bituminous paint all as specified |
