Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | S&F in repair 12 mm thick toughend glass partition / Fixed glass/ door (shutter ) with hydraulic floorspring and top pivot andwithset of new SShydraulic floor spring& top pivotsufficent tooperate for the glass doors withweightof 120-150 Kg incl cutting to shape, drilling holes required incl figured/ frosted glass film of required pattern/ logo/ shape on one side and incl fixing on Aluminium / WPC Frame (As per site requirement) incl all required accessories rubber beading, silicon, SS Handle 600mm Long of required design and shape etc Colour as approved byEngr-in-ChargeComplete all as specified and directed. Make of Hydraulic floor spring and top pivot set : Ozone, Ebco, Hardwyn |
| 2 | Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and as directed. |
| 3 | M&L forvitrified ceramic light shade matte/ Glossy finish tiles 10 mm thick (square /rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over and incl 15 mm thick Screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed. (Colour and pattern of tile as approved by EIC and work to be execute through skilled labour) Make :- Kajaria or equivalent in Somany /Johnsion/ Nitco |
| 4 | M & L Virified Ceramic tiles light colour 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and incl 15 mm thick cement screed 1:6,complete in all respect as specified. |
| 5 | Description all as per item No. 4.00 here-in-before but on vertical surfaces over and including 10 mm thick plaster/ backing coat in cement mortar 1:4, complete all as specified and as directed. |
| 6 | M&L for glazed coloured ceramic tiles (incl high lighter/ border pattern) in vertical surface (300mm x600mm x 7-8 mm)thick fixed with premium quality chemical adhesive Fevi Mate or equivalent incl surface preparation with 10 mm thick rendering/ backing coat of CM 1:3and joint shall be kept as 3 mm filled with epoxy to attain the best result 3 mm thick tile spacers to be used, Masking tape shall be put before putting the eposy grout & the grout shall be throughly cleaned immediatly, complete all as specified and directed. |
| 7 | M & L Non skid joint less coloured ceramic tiles 7-8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr in charge. (approved by EIC) Make :- Somany or equivalent in Kajaria/Johnsion |
| 8 | M & L Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over including rendering/ backing coat 10 mm thick in CM 1:4 on wall complete in all respect as specified. Colour and pattern approved by EIC) Make :- Somany or equivalent in Kajaria/ Johnsion |
| 9 | M&L cement concrete 25 mm thick in PCC 1:2:4 (20 mm graded aggregates) as in sub base of floors finished fair and even complete all as directed |
| 10 | M& L for endura chequerd tiles 30 cm x 30 cm with 22 to 25 mm thickness of approved colour and design pattern (Square/ rectangular) as in paths, floors etc set and jointed inneat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 11 | Taking down chowkhat or frame without taking off shutters of any description exc 1.5 sqm and not exc 4 sqm each complete all as specified and directed. |
| 12 | Taking down chowkhat or frame without taking off shutters of any description not exc. 1.5 sqm complete all as specified and directed. |
| 13 | Taking down chowkatsor frames exc 1.5 sqm but not exc 4 sqm incl shutter after replacing chowkhats the old shutter shall be refixed in same opening complete all as specified and directed. |
| 14 | Taking down Shutters of any exc 1 Sqm but not exc 2.0 Sqm complete all as specified and directed. |
| 15 | S&F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., incl Filling hollow of frame with plain cement concrete 1:3:6, type C-1 complete, as specified and directed. |
| 16 | S & F Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 17 | S & F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc incl Filling hollow of frame with plain cement concrete 1:3:6, type C-1 complete, as specified and directed. |
| 18 | S & F IInd Class HW35 mm thick Plain framed, panelled shutter (any No panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated Complete all as specified and directed. |
| 19 | S&F IInd Class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkatsComplete all as specified and directed. |
| 20 | S & F 35 mm thick flush shutter solid core constn with block board core and plywood face panels, commercial type on both sides, supplied and fitted to chowkhats complete all as specified and directed |
| 21 | S&F200 mm Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 22 | S&F 150 mm Extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed. |
| 23 | S&F Butt hinges in 100 mm Size, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 24 | Supply and fixedFloor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed. |
| 25 | S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified. |
| 26 | S&F in repair aluminium window as per TD DrgNo CEDZ/TD-316 with following specification : (i) Outer frame of size 40mmx114mm with 1.mm thickness, corner 45 degree cut & aluminium welded (ii) Centre mullion of size 40mm x65mm (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3 mm thickness 45 degree cut mechanically joint with 6mm allen key boult clamp with 5mm clear glass both side EPDM rubbe gasket metal body hand layer type single point lock, aluminium kobra hinges 2 No per shutter. (iv) 12mm ss 202 grade round bar . (v) Welded wiremesh sutter (2 Nos)of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges,PVC magnet & necessary fitting and locking arrangement . (vi) Entire window shall be power coated with pure polyster coat of any shde as approved by GE. (vii) Window shall be installed with silicone complete all as specified and directed by Engineer in-Charge. |
| 27 | S&F in repair aluminium window as per TD DrgNo CEDZ/TD-316 with following specification : (i) Outer frame of size 40mmx114mm with 1.mm thickness, corner 45 degree cut & aluminium welded (ii) Centre mullion of size 40mm x65mm (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3 mm thickness 45 degree cut mechanically joint with 6mm allen key boult clamp with 5mm clear glass both side EPDM rubbe gasket metal body hand layer type single point lock, aluminium kobra hinges 2 No per shutter. (iv) 12mm ss 202 grade round bar . (v) Welded wiremesh sutter (2 Nos)of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet. (vi) Entire window shall be power coated with pure polyster coat of any shade as approved by GE. (vii) window shall have provision of for installtaion of window AC/ Desert cooler and provision of window glass shutter, wiremesh, grill and necessary fittings and locking arrangement for subject portion will be modified as per ground requirement during the execution as per directions of Engr-in-Charge. (vii) Window shall be installed with silicone complete all as specified and directed by Engineer in-Charge. |
| 28 | S&F in repair aluminium ventilator with outer frame 40mmx114mm with 1.3mm thickness corner 45 degree cut & aluminium welded centre mullion size 41mmx65mmx1.3mm thick partly glazed /guazed including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,MS wire mess, 5 mm thick frosted glass etc, provision for fixing the exhaust fan complete all as specified and directed. |
| 29 | S&F in repair aluminium powder coated door with frame, partially/fully glazed shutters single/ double divided into two panels including aluminium anodised snap beading and rubber gasket/lining for fixing of glass/ACP sheet as per requirement. The frame shall be fixed with aluminium anodised bolt by drilling in the existing wall and with thrust bolt of suitable size all as directed. The frame and shutter will be made out of the following section and fitting(a) Aluminium anodised door frame 101.60 mm x 44.75 mm x 2mmfixed with aluminium thrust bolt in walls by drilling as directed. (b) Aluminium anodised sides rail of shutter section 83.5mmx 44.5mm x 2mm (c) Aluminium anodised bottom rail of shutter section 150mm x 44.5 mm x2mm.(d) Aluminium anodised top and middle rail of shutter section 100mm x 44.5 mm x 2mm. ( e) Aluminium anodised tower bolt 200 mm long - 02 Nos in each leaf,Aluminium anodised handle 250 mm long of approved Make Classic/Argent 02. No’s in each leaf. (g) Glass Pane shall be 5.5 mm thick tinted glass (h) 5 mm thick Aluminium Composite panel and mortice key lock including complete all as specified and directed(Cost of glass pane, ACP sheet and all required accessories for installation will be incl in quoted rates) |
| 30 | S & Fin repair Powder coated aluminium (minimum thickness of powder coating 50 micron)partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides witrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws and incl aluminium sheet board / glass between panels, all complete all as specified and directed. (quoted rate incl aluminium section, 5.5 mm thick glass/aluminium Composite panel sheet and all required accessories for installation) |
| 31 | S&F in repairs, 4 mm thick aluminium composite panel(ACP) of approved quality and colour with minium 0.025 mm thick aluminium foil, fixing with MS frame at any height and incl MS frame of size not exc 0.36 sqm (used in rectangular MS hollow pipe of size 50.8 mm x 25.4 mm x 2.9 mm thick or Square MS hollow pipe of size 38 mm x 38 mm x 2.9 mm thick to be used in frame) and filling the joints with all weather silicon sealant incl all mouldings, cuttings, etc complete all as specified and directed. (Cost of MS frame of given size will be incl in quoted rates and only steel scaffolding is allowed and cost of same will be incl in quoted rates) |
| 32 | S&F of 3D ACRYLIC LETTER made of stainless steel size not less than 18 inch in height and 25 mm in thickness upto 60 Nos letter in english and hindi incl comma, dash incl 2 x logo etc to be fixed on ACP sheet / Granite wall incl necessary electric wiring and lighting device for making function complete all as specified and directed. |
| 33 | S & F Solid PVC Door Frame of size 50mm x 95 mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS sqare tubeusedas per specifications and drawings incl fasteners and make good the damage portion complete all as specified and directed. |
| 34 | Supply and fixed Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelamMoulded PVC Sheet on the front face 2mmthick plainPVC sheet on back face to be fixed onframe at site as per specification & drawing |
| 35 | S&F Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed. |
| 36 | S&F in repair Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed. |
| 37 | Hacking out old broken glass (any thickness) from metal frame/aluminium frames including punching or drilling out old galzing pins complete all as specified & directed. |
| 38 | S & F 4.0 mm thickordinary glass and glazing with oil putty in square not exc 0.5 Sqm in each pane or rubber beading /putty as required complete all as specified & directed. |
| 39 | S & F 4.80 mm thickFrosted glass and glazing with oil putty in square not exc 0.5 Sqm in each pane or rubber beading/putty as required complete all as specified & directed. |
| 40 | S & F in repair Stainless steel glass door handle 600mm long with screw complete all as specified and directed. |
| 41 | Dismantling water tanks exc 500 ltr and not exc 1000 ltr and removal from site to store complete all as specified and directed. |
| 42 | S & F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Including making connection for inlet & outlet with connection piece complete all as specified and directed. Make : Prayag/ Sintex/Vectus |
| 43 | S&F 750 ltr Rotational moulded Polyethylene water storag tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-1 |
| 44 | S & F ball brass valves high pressure with polythene float & flynut complete screwed for Iron pipe or brass ferrule of 20 mm dia and fixed complete all as specified and directed. |
| 45 | S&F in repair 20 mm boregun matel globe or gate valves with iron wheel, screwed both ends for iron pipes fixedcomplete in all respect as specified and directed. |
| 46 | S & F in repair ball brass valves high pressure with polythene float & flynut complete screved for Iron pipe or brass ferrule of 20 mm dia and fixed complete all as specified and directed. |
| 47 | M&L for welding in repair of metal thickness not exc 6 mm and length of weld exc 2.5 cm, not exc 5 cm complete all as specified and directed. |
| 48 | M&L for Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm (+ 0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + 0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 49 | M&L for Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 50 | Supply only 5.5 mm selected quality plain glasses of size exc 0.5 sqm in each pane, complete all as specified and directed |
| 51 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc |
| 52 | M&L rendering 15mm thick in Cement Mortar 1:4 on fair faces of brick or concrete, external surfaces of parapet walls finishedand even & fair without using extra cement integral water proofing compound as per manufacturere\"s instructions (water proofing compound shall be measured and paid seperately) complete all as specifed & as directed. |
| 53 | M&L rendering 15mm thick in Cement Mortar 1:6 on other than fair faces of brick surfaces of walls finished the surfaceeven & Smooth without using extra cement complete all as specifed & as directed. |
| 54 | M&L 10 mm thick plastering in Cement Mortar 1:3 finished even and smooth w/o using extra cement onceilings complete all as specifed & as directed. |
| 55 | M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4(1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand : 2 white marble stone chipping 10mm nominal size with colour compound) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings incl Forming groove of uniform size 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed. |
| 56 | M&L 100mm thick PCC 1:4:8 type D-2 using (40mm graded aggregate) as in sub base of floor complete all as specified and directed. |
| 57 | M&L Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper using roller brush on walls over a coat of primer and over incl one coat of 1.50mm thick wall putty complete all as specified and directed. |
| 58 | M&L Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.00 mm thick wall putty complete all as specified and directed. |
| 59 | M & L for preparing the newly plastered wall surface and applying primer with applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sq( Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required. ) complete all as specified and directed. |
| 60 | Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortarin floor, aprons etc complete all as specified and directed. |
| 61 | M&L for 20 mm thick Granite work in platforms, partitions and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & half curving the edges of granite including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 62 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 63 | M&L Granite (of any type) tiles 20mm thick (approved colour) machine cut,bedded with 15 mm screed bed in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 64 | M&L 20 mm thick granite (of any type) (approved colour) machine cut as in vertical surfaces and skirting/ dado over including 15 mm thick rendering in CM 1:4 jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing complete all as specified. |
| 65 | M&LMachine cut kota stone slab flooring 20-25 mm thick laid over 20 mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 66 | M&LMachine cut kota stone 15-18 mm thick in riser of steps, skirting, dado and pillar laid over 15mm screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the existing slab including rubbing and polishing complete all as specified and directed. |
| 67 | Providing edge moulding to 18 - 20 mm thick stone of any description of counters vanities etc incl machine polishing to edge to give high gloss finish etc complete all as specified and directed. |
| 68 | Providing and fixing at site factory made kerb stone of required shape and size of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3(1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and incl dismantling of existing kerb stone complete all as specified and directed. |
| 69 | M&L for one coat of synthetic enamelled paintin anyapproved pattern and colourincluding preparation of new or previously untreated surfacesofKerb stone /concrete/plaster surfacesexceeding 10cm width or grith not other wise provided complete all as specified and directed. |
| 70 | Demolition cement concrete (reinforced) of any description and in any position complete all as specified and directed. |
| 71 | S&F RCC factory mademanholes covers medium duty conforming to IS-12592(2002) with MS flat all round the cover and incl reinforecement of any thickness and size laid with cement mortar 1:6 in position complete all as specified and directed. |
| 72 | S&F Mild Steel Framed work such as grills, gratings, etc.. with ends of bars shoulderedand/or riveted, or forged into spikes; framed guardbars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 making good of dismantled portion by plastered/concrete work and match with existing surface complete all as specified and directed. |
| 73 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of approved colour, size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and lengthcomplete as per direction of Engineer-in-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make : Rajshri / Fenesta / Ecocell/ Black Cobra |
| 74 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws incl all hardware fitment of brass approved colour and design by Engineer- In- Charge complete all as specified and directed. Material test certificate and authentication should be compulsory provided by the manufacturing company. Make : Rajshri / Fenesta / Ecocell/ Black Cobra |
| 75 | S&F Brass butt hinges in 125 mm long type C11 with brass screws complete all as specified and directed. |
| 76 | S & F brass mortice lock 65 mm 6 lever vertical type with duplicate key and handle set complete all as specified and directed. |
| 77 | S & F in repair Aluminium extruded section body door closer, hydraulically regulated, design No 2, universal type, suitable for door shutter 701 mm to 850 mm in width and of weight 36 to 60 Kg eachcomplete all as specified and as directed. |
| 78 | S & F in repairDouble action floor spring, hydraulically regulated, made out of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel, heavy duty and fixed complete for glass/aluminium door complete all as specified and as directed. |
| 79 | S&F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed. |
| 80 | S&F in repairs butt hinges 100mm medium weight, cold rolled, mild steel fixed with welding or screws on position complete all as directed |
| 81 | S&F in repairs 150 mm Extruded aluminium alloy handles, fabricated type., anodised complete all as directed |
| 82 | S&F in repairs 200mm aluminium anodised barrel tower bolts of extruded section complete all as directed |
| 83 | Supply and fixed in repairs Floor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, |
| 84 | S&F in repairs Drappery curtain rods decorative type stainless steel 304 Grade, 25 mm nominal diaand having wall thickness 1.40 mm of approved quality/make including fixing oftwo number decorative brackets fixed in brick/concrete wall, Two number knob on both ends of curtain rods (The length of each curtain rod will be 1.00m to 2.50m long) complete all as directed and specified. |
| 85 | S & F in repair Vitreous China wash down water closet pan (S-Trap/ P-Trap) 1st quality (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including sheet cover complete all as specified. MAKE : Parryware / Hindware /Jaquar |
| 86 | S & F in repair Vitreous China wash down water closet pan(S-Trap/ P-Trap) 1st quality Semi pedestal pattern (Anglo-Indian Type), white (excluding fixing bolts, flushing cistern and flush pipe) including sheet cover complete all as specified. MAKE : Parryware / Hindware /Jaquar |
| 87 | S and F in repairs PVC valveless, syphonic action type, flushing cistern of 10 lit capacity low level, white, with inlet,ball valve, float and handle including brackets with 32 mm CPFlush pipe of Low level cistern complete all as specified. MAKE : Parryware / Hindware / Jaquar |
| 88 | S&F in repairs china water closet Orissa Pan 580 X440mm long pan Ist quality ISI marked with intergral foot rests, cast iron\"S\" trap including provn of cement concrete bedding including connections and fixing flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed. |
| 89 | S&F in repairs vitreous china white wash hand basin flat back of size 550x400mm ISI marked Ist quality including CI/MS brackets including cutting for and pinning in brackets complete all as specified and directed. |
| 90 | S&F in repairs Square shape Hindware fonte ceramic table topwash hand basin Star white Italian collection (Model No. 91043of size 61 x 46 x 15 Cm on 18 mm thick granite (colour as approved) machine cut as in platforms, bedded andjointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing laid over 15 mm thick screed bed or bedding layer of cement mortar 1:6 including required angles, 32mm bore dia CP waste coupling, and all reuired fittings complete in all respect as specified and directed MAKE : Hindware (Model No. 91043) or equivqlent inKohler / Jaquar |
| 91 | Supply and fixing in repairs floor mountedcoupledstar white one piece water closet (Pedestal pattern)(Italian collection) premium class of cat part No 92551 (S-22) 70 x 38 x 73 Cm with P or S of size 220 mm, EWC with inbuilt sensor for touchless flushing, ensure more hygiene, slow falling seat cover, Elegant design, Easy clean, I trap including soft closed seat cover, hinges fixing accessories set and accessories set,inclflushing cistern, with cistern fittings connection to drain or (outgoing pipe) & to flushing pipe anti syphonage pipe etc. complete in all respect as specified and directed. Make : Hindware cat part No 92551 (S-22) 70 x 38 x 73 Cm or equivalent in Kohler / Jaquar |
| 92 | S&F in repairs 15 mm dia brass chromium plated long body Bib tap fancy type with capstan head screwed down for iron pipe complete in all respect as specified. MAKE : Kohler / Hindware / Jaquar |
| 93 | Supply and fixed in repair Hindware Amazon 15mm bore dia chromium plated Brass single lever basin Mixer, (Item code : F-570012)round spout with popup Waste assemlywith 10mm dia , 450 mm long copper pipes complete in all respect as specified and directed by Engr-in-Charge. (Make:-Hindware CAT Part No:F-570012 or equivalent in Kohler / Jaquar |
| 94 | Supply and fixed in repair CP finish Robe Hook complete in all respect as specified and directed by Engr-in-Charge. Make:-(Make:-Hindware CAT Part No:F890001 or equivalent in Jaquar / Kohler |
| 95 | S&F in repairs chromium platedhealth faucet (Brass) with double Lock including wall Hooks & flexible pipe 15mm bore hose connecting pipe 1.2 m longwith check nut and washers complete all as specified . (Make:-Hindware CAT Part No : F-160122 or equivalent in Kohler / Jaquar |
| 96 | Supply and fixed in repairs chromium plated finish paper holder complete in all respect complete as specified and directed by Engr-in-Charge. Make : Hindware cat. No. F840008 or equivalent in Kohler / Jaquar |
| 97 | S & F PVC mirror cabinet of size 350 mm x 450 mm x150 mm with openable single looking mirror with PVC inner & outer shelves of any colour, including taking down old looking mirror & wooden cupboard mirror complete all as specified and directed MAKE : CERA / Hindware / PRAYAG |
| 98 | S&F in repair Stain less steel plate rack made of stainless steel 1mm thick of grade 304, size 900mmx 600mmx250mm complete all as specified and directed. Make : Nirali / Comet / Prayag |
| 99 | Supply and fixedpeg setof 6 fixedwith rawal plug make ;- Prayag Cat no BEA-30 or equivalent in Shakti / Hindware / PRAYAG). |
| 100 | S & F in repairs Hindware Cat No. F-840004 Soap Holder (Brass)with tumber holder MAKE :Hindware Cat No. F-840004 or equivalent in Kohler / Jaquar |
| 101 | S&F in repairOne piecewhite Wash Basinwith full Pedestal fo size 560 x 415 x 820 mm complete all as specified and directed. Make : Prayag Cat No : 4602 |
| 102 | S & F in repair plastic water closet seat cover white, closed pattern with flat bottom and mild steel chromium plated hinging device complete all as directed and as specified. |
| 103 | S&F in repair white, vitreous china, battery based, infrared sensor operated urinal of approx size 710x 485x310mm having pre & post flushing with water, including fixing to walls complete all as specified & as directed. Make : Jaquar Cat No URS-WHT-13255& SNR-CHR-51097or Equivalent model of GROHE/KEROVIT (Kajaria) |
| 104 | S&F brass chromium plated Urinal spreader heavy duty of PTMT any colour for fixing with 15mm diapipe.(Minimum weight 60gms) suitable for half stall urinal fixed with stainless steel screw complete all as specified and directed. |
| 105 | S&F in repairs 32 mm bore PVC waste pipe for WHBcomplete all as directed |
| 106 | S&F in repairs 40 mm bore PVC waste pipe for urinals/sink complete all as directed |
| 107 | S&F in repairs waste fittings brass chromium plated 32 mm dia for wash hand basin complete all as directed |
| 108 | S&F in repairs waste fittings brass chromium plated 40 mm bore for stainless steel sink/urinals |
| 109 | Supply and fixed in repairs 600 mm long C P finish CP Towel Bar complete in all respect as specified and directed by Engr-in-Charge. Make:- Hindware Cat. No. F840013 or equivalent in Kohler / Jaquar |
| 110 | S&F in repairs chromium platedcast copper alloy angle valve fancy type with capastan head screwed down ends for high pressure for 15 mm bore iron pipe complete all as directed. Make: Hindware CatNo. F-320006 or equivalent in Kohler /Jaquar |
| 111 | S & F in repair 15mm bore dia Stainless Steel finish 2 way Bib Cock quarter turn including cover plate complete in all respect as specified and directed by Engr-in-Charge. Make: Hindware Cat No. F-320005 or equivalent in Kohler /Jaquar |
| 112 | S&F in repairs 15 mm dia cast copper alloy stop valve screwed down for high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete in all respect as specified. |
| 113 | S & Fin repair 15mm bore Pillar cock Swan neck spoout and aertor for WHB complete all as specified & directed. Make : Cera Cat No.: F1099104 |
| 114 | S & F in repair of SS chromium plated jet for WC with 1.00 M long pipe including necessary fittings complete all as specified and directed. |
| 115 | M&L Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed. |
| 116 | S&F inrepair 20mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) |
| 117 | S&Fin repair Waste coupling32mm bore dia of PTMT half threaded for WHB/Sink complete all as specified and directed. |
| 118 | S & F in repair of Brass chromium platedtowel ring, fixed with rawl plugs. all as specified. |
| 119 | S & F in repair600mm Long PVC connection suitable for 15mm bore pipescomplete all as specified and as directed. |
| 120 | Disconnecting existing tanks of capacity exc 250 Ltr & n exc 500 Ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc incl reconnecting and refixing in positioncomplete in all respect as specified. |
| 121 | Disconnecting existing tanks of capacity exc 500 Ltr & n exc 1000 Ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc incl reconnecting and refixing in positioncomplete in all respect as specified. |
| 122 | S&F in repair FullGlass Shelf 450 mm (with brass brackets) complete all as specified and directed,.Make : Prayag Cat No : BEA-55 |
| 123 | S&F in repair corner Glass Shelf300mm (with brass brackets)complete all as specified and directed. Make : Prayag Cat No : BEA-44 |
| 124 | S&F pre-painted galvatume aluminium zinc coating GI based corrugated crimp curvedsteel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 125 | S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 126 | Dismantling wrought iron or mild steel workofanydescriptionnot otherwise provided for complete all as specified and directed. |
| 127 | Dismantling wood of any description Scantling / frame Work / trusses/purlin/ rafter/rails/ festenings /beam/posts/door frames etc complete all as specified and directed. |
| 128 | S&F Steel work in tubular tru-sses of required shape including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 gradeSt.-240,complete all as specified and directed. |
| 129 | Dismantling Asbestos cement sheet (corrugated, semicorrugated etc) roof coverings complete all as specified and directed. |
| 130 | Dismantling of Plain or corrugated steel sheeting, polycarbonate sheet or any type of sheet, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 131 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness thickness (below or above ground level) anddisposal of all bldg Materials to out side MOD land as per NGT guide line complete all as specified & directed.. |
| 132 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded aggregates) as in plinth protection laid to slope 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and incl all necessary form work to divide the area in panels, finishing exposed edges rough or rounding or chemferring where directed and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by wt.) complete all specified and directed. |
| 133 | M&L providing cement concrete type B1, 1:2:4 (20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seism and other similar bands, plinth courses, string course, lacings courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightlyround or chamfered angles and thorating all as specified and directed. |
| 134 | M&L for providing and injecting chemical emulsion for post construction Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 135 | M&L forProviding and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. |
| 136 | M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc. complete all as specified and directed. |
| 137 | M&L for Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing wall complete all as specified and directed. |
| 138 | M&L for Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same. |
| 139 | M&L for Supply and fixing 18 mm thick 100 % Solid premium quality Action Tesa HDHMR base board pre laminated both side (of approved colour) having density more than 850 kg/cum, fixed with screws as in wall panel, storage cabinet/Vanities/ Cub board and built in modular tables etc, for hold of shelf / partation and shall provide 3 edges in sizes 18 mm x 18 mm as per required length.theedgesof shelf / partation / wall side to be lipped with including 18 mm x 1 mm thick laminated sheet of density 850 kg/cum manufactured by as ISO -9000 certified company , lipping portion should be match with laminated colour, using solvent cement etc. (including all necessary brass hardware fitting i.e Soft closing hydraulic hinges (Make :Atlantic / Lapo/ Hettich) ,handle, ball catchers including mortice locking arrangement (Make: Doorset / Godrej / Yale), hole cap including lipping etc, and Channel siliding rail in each Cup board/ Vanities complete incl dismantling of existing all as specified and directed. |
| 140 | M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed. |
| 141 | M&L for Onecoats of synthetic enamel painton old woodenSurfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed. |
| 142 | M&L for two coats of synthetic enamel paint over a coat of Red oxide primer on new Steel Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed. |
| 143 | M&L for Onecoats of synthetic enamel painton old Steel Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed. |
| 144 | M & L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/electric regmal machine andapplying one coat ofwall care putty then scrubbing by sand paper to prepare a even surface andapplying priming paint followed by applying two coats of OBD of any colour complete all as directed. (Asian Paints,Berger) |
| 145 | M&L forcomplete removal of existing treatment from old surfaces of ceiling scrapping by machanical means and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.50mm thick wall putty complete all as specified and directed. |
| 146 | M & L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/electric regmal machine andapplying primer with applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sq( Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required. ) |
| 147 | Taking up or down 25mm bore steel tubingand connections, including cleaning for refixing or removal to store |
| 148 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store |
| 149 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store |
| 150 | S & F 25 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 151 | S & F 20 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 152 | S & F 15 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 153 | S&F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee,union etc for 15 mm bore pipe (ISI marked) complete all as directed (Note:- Refixing of old GI tubing upto 1.5 m included in rates) |
| 154 | S&F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee,union etc for 20 mm bore pipe (ISI marked) complete all as directed (Note:- Refixing of old GI tubing upto 1.5 m included in rates) |
| 155 | S&F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee,union etc for 25 mm bore pipe (ISI marked) complete all as directed (Note:- Refixing of old GI tubing upto 1.5 m included in rates) |
| 156 | S&F in repairs PVC handle for low level flushing cistern all as directed complete all as directed |
| 157 | S&F in repair PVC flush pipe of 32mm dia pipe with two Nos check nuts for connecting low level flushing cistern to EWC/IWCcomplete all as specified. |
| 158 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified. Make of Pipe :- Plasto / Prayag / Finolex |
| 159 | Supplying and laying of 25 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified. Make of Pipe :-Plasto / Prayag / Finolex |
| 160 | S & F 20 mm dia Brass Elbow suitable for CPVC Pipes. |
| 161 | S & F 20 mm dia Brass Elbow (3/4 x 1/2) suitable for CPVC Pipes. |
| 162 | S & F Union 20 mm suitable for CPVC Pipes. |
| 163 | S & F 20 mm dia Brass Tee suitable for CPVC Pipes. |
| 164 | S & F Male Brass Threaded Adaptor (MTA/ MBTA) ) 20 mm dia suitable for CPVC Pipes. |
| 165 | S & F FemaleBrassThreaded Adaptor(FTA/ FBTA) 20 mm dia suitable for CPVC Pipes. |
| 166 | S&F CPVC BALL VALVE of outer dia 20 mm |
| 167 | S&F CPVC Tank Adaptor of outer dia 20 mm. |
| 168 | S&F in repair plain CPVC fittings such as socket, elbow, nipple, Tee, union, Reducer, Bushing, Step over bends, End cap, End plugs etc for 20 mm bore outer dia of CPVC pipe (ISI marked) complete all as directed |
| 169 | S&F in repair plain CPVC fittings such as socket, elbow, nipple, Tee, union, Reducer, Bushing, Step over bends, End cap, End plugs etc for 25 mm bore outer dia of CPVC pipe (ISI marked) complete all as directed |
| 170 | Dismantling of RCC Jalli of any description and in position and unserviceable Jalli removed from site and serviceable RCC Jalli stactaking at site after cleaning/dustingfor fixing the same as directed by Engineer in Charge. |
| 171 | S & F at site Factory Made 24 mm thick 100% Solid WPC (Wood polymer Composite ) Plain Jali cut on CNC machine of approved design & Colour, measured size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm manufactured by an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with MS Hollow pipes frame & MS Square bar incl stainless Steel Screws / Fastners or required length all as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company. Make :Make : Rajshri / Fenesta / Ecocell/ Black Cobra (Note : Payment of MS hollow pipe/MS angle will be paid in seperate items) |
| 172 | S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood plated brass screws and cup washers complete all as specified and directed. |
| 173 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 174 | S & F 110 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Make:-Finolex / Supreme/ Vectus |
| 175 | S & F 75 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Make:-Finolex / Supreme / Vectus |
| 176 | S & F 110 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. Make:-Finolex / Supreme/ Vectus |
| 177 | S & F 75 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. Make:-Finolex / Supreme / Vectus |
| 178 | S & F50 mm dia Unplasticised PVC pipes of pressure rating (10 kgf/ cm2) pipe, fixed to walls, ceilings or in floors etc, any type of pipe incl fittings as ends, elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips etc complete all as specified and directed. Make:-Finolex / Supreme / Vectus |
| 179 | S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement |
| 180 | S&F in75mm borePVC (SWR) vent cowl |
| 181 | S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE-290 Gde-E-165 |
| 182 | S&F 75 mm dia PVC (SWR) floor trap, plain with CP grating 125 mm dia round including jointing with solvent cement fixed with cement mortar including necessary cutting etc complete all as directed |
| 183 | S & F 110 mm PVC (SWR) Cowl |
| 184 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 185 | S&F75 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 186 | S&F 150mm PTMT Symet Bath assestGrating square hole/without holefixed in position over Rain Water Pipe/nahani trap with cement slurry Make Prayag, |
| 187 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including allquoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.. |
| 188 | M&L for Brick work with sub-class `B\" bricks, straight or curved on plan exceeding6 M mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 189 | M&L for Brick work with sub-class `B\" bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:6) complete all as specified and directed. |
| 190 | M&L for Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes pier holes, foundation etc and getting out in soft/loose soil complete all as specified & directed. |
| 191 | M&L for returning, filling in, includingspreading, levelling, wateringand well ramming in layers not exc 25 cm on soft/loose soil complete all as specified and directed. |
| 192 | M&L for Removing surplus excavated material to a dist n exc. 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified & directed. |
| 193 | M&L for cement concrete 1:4:8 type D2 (using 40 mm graded aggregate)as in foundation filling and mass concrete complete all as specified and directed. |
| 194 | S&F 75mm thick factory made SFRC manhole/ drain covers/ Kitchen GT cover of approved shape & size incl 2 No. of handles complete all as specified and as directed.Make : Polycrete or equivalent. |
| 195 | Dismantling of Brick tiles or terracing tiles existing roof treatment of any type , like plastic felt/HP tiles including existing plastering /concrete in covering of any thicknessincluding removal of debris to be disposed out side of MOD premises complete all as specified and directed. |
| 196 | Demolition of mud in roofs any thickness complete all as specified and directed |
| 197 | Demolition of existing treatment likePCC padding Cement Concrete (unreinforced) of any description including APP membrrane/plastering and leeping complete disposal of all debristo out side MOD land all as specifed & directed. |
| 198 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed. |
| 199 | M & Lbrushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and directed. |
| 200 | M & Lfor PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in roof padding, roof kerb or mud stop, rounded or chamfered on edge complete all as specified and as directed. |
| 201 | M&L 15 mm thick Screed bed or bedding layer of CM 1:4 mixed with integral water proofing compound as per manufacturere\"s instructions . (water proofing compound shall be measured and paid seperately) complete all as specified and as directed. |
| 202 | Supply only water proofing compound liquid @ 200 ml / per bag of cement complete all as specified and directed. |
| 203 | M&L for heat reducing water proofing treatment of roof with reinforced elastomeric liquid waterproofing membrane of 400-micron thickness in four layer(100 micron each layer) having SRI of 130, tested as per ASTM E 1980 (with Solar Reflectance and Thermal emittance tested as per ASTM C 1549 and ASTM C 1371 , respectively). The coating should have water absorption less than 1% as per IS: 101 (P-7/Sec-1) 1989, with the ability to resist heat upto 120 degree celcius as per IS: 101 (P-7/Sec-3) 1990 having VOC less than 1.00 g/ltr as per ASTM D 3960 and should have excellent resistance to transmission of ponded water up to 2.5 bars of pressure for 7days. It should also be resistant to Ammonia solution, Sodium nitrate, Sodium hydroxide, along WIth water and soap solution as per IS: 101 (P-7/Sec-2)1990. The waterproofing heat reducing membrane will be laminated with 25 - 40-micron thick transparent Nano modified composite crosslinking polymeric coating with a minimum of 40% solid content as per IS: 101 (P -8/Sec6)1993 and also should pass Impact test as per IS: 101 (P-5/Sec-3) 1988 along with having dust and water repellent & anti-graffiti property passing Scratch hardness test of 500g as per IS: 101 (P-5/Sec-2) 1988. It should also pass Cross Cut Adhesion test as per IS: 101 (P-5/Sec-2) 1988. The Polymeric coating should have a self-cleaning and easy-to-clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes cleaning the surface with wire brush and washing cleaning to remove all dust, fungus, etc.The work will be done under the supervision of the Engineer-in-charge.The coating thickness and the methodology of application shall strictly be carried out by the authorised vender/ manufacturers with all specifications and as approved by the Engineer-incharge. The manufacturer / authorised vender shall give a warranty for the peformance& durability for 7years. Make : Starshield/ STP/ Asian |
| 204 | Removing building demolished materials / old waste unwanted existing material of any description or any type etc on alternate day to a distance 5 km or beyondout side MOD land complete all as specified and as directed. |
| 205 | M & L uprooting of plants (girth not exc 15 cm of trunk to any height of plants) grown along the pipes or walls,chajjas,parapets bldgs and making good the surfaces as per existing surfaces and pouring acid not less than 100 ml for each plant in the root to avoid further growth as directed.Any other grass plants etc below 45 cm height shall be deemed to be removed from the premises complete all as specified and directed. |
| 206 | Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat.Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floting with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site. ( Welded mesh & addl reinforcement if required measured and paid separetly)Note :-Note: Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosingaffected area by green cloth) up to G+3 storey building. |
| 207 | M & L hard drawn steel wire fabric cut to length, bent to shape required of mild steel wire mesh / welded meshand tying with and including annealed mild steel wire not less than 0.9mm dia binding wire S & F in reinforcement weight not exceeding 4.00 Kg/Sqm complete all as specified and directed |
| 208 | S & F in repairbrass mortice lock 65 mm 4 lever vertical type with duplicate key and handle set complete all as specified and as directed. |
| 209 | S & F in repair brass mortice lock 100 mm, 4 lever, vertical type, with duplicate key complete all as specified and as directed. |
| 210 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/wall paneling, blankets, any thickness, including cover fillets and frame complete. |
| 211 | S&F Solid PVC Wall Liningconsisting of 5mm thick single side prelam PVC sheet (colour as approved by Engr-In-Charge) instead of Plain colour PVC sheet inclusive of PVC frame work, solvent cement, screws, fasteners and all required accessories and fixing the sheet at site on PVC frame as per specifications and drawing includingcomplete all as specified and directed. Make : Rajshri |
| 212 | M & L for providing & fixing semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistanceof 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge |
| 213 | S & F in repair 15mm bore brass CP wall mixer (2 -in - 1 type) with L bend (provision for over head shower) fancy type for mixing hot and cold water screwed down for 15mm bore iron pipes complete all as specified and directed by EIC.(Make : Prayag Cat No. 9375 or equivalent inKohler/Jaguar/Hindware) |
| 214 | S&F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. Make : Hindware cat No. F160146 or equivalent in Kohler/ Jaquar |
| 215 | S&F in repair sinks with drainage board made of stainless steel 304 grade1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including PVC waste pipe and cp waste fitting.overall size 915mmx460mm bowl size 410mmx330mmx160mm to be fix in the concrete slab and make good the damage portion complete all as specified and directed. |
| 216 | Supply & fix in replacement 125mm dia chromium plated gratings over nahani / floor traps including embedded the same in white cement to match complete all as specified and directed. |
| 217 | M&L 12mm thick Gypsum board as in ceiling/lining fixed with counter sunk screws on & including GI channels frame work of standard section as per manufacturers instruction , fixed @ 1.2m in one direction and 45cm in C/C in other direction with necessary fixing arrangement at their junction point at desired heights below roof slab and including two coats of plastic emulsion paint over a coat of primer on exposed surfaces, the frame work shall be fixed with the help of GI suspenders of suitable size with the help dash fasteners and along wall, making good disturbed surfaces smoothening the gypsum board, POP lining at joints panning as required complete all as specified and as directed. |
| 218 | M&L for scraping and clearing of door/ to remove existing polish filling, putty or existing hardeners for reparing of any wooden marks, scratches or scars and treated withputty/ primer to obtained similar texture and mallamine coating on the surface with approved shade and make (MRF, Berger, Asian) on the surface/ doors to obtain smooth and uniform looking complete all as specified and directed. |
| 219 | M&L for preparation of Old wall / ceiling surfaces & applying two coat of plastic emulsion paint of ant tint, using roller brush complete all as specified and as directed |
| 220 | M&L for applying two coats of interior wall texture paint of authorised manufacturer/applicator including on plastered surface incl preparation of surface complete all as specified and as directed. Make: Asian Royale/Berger |
| 221 | S & F 4 mm thick FRP/ Fiberglass chhaja (Factory made) forbuilding with required colour shade,size, design for outdoor complete fixing at site with 150 mm long fasterner including demolition of old RCC chhaja complete all as specified and directed by Engr-in-charge and approval by GE |
| 222 | S&F in repair 15mm bore sensortonic senser faucet cromium plated swan neck/high neck for washbasins deck mounted complete with controll Box (Battery operated) all as specified & directed. Make : Cera Cat No.: F6010108 or Jaquar Cat NoSNR- CHR-51011 |
| 223 | S&F in repair 6V Duracell ultra Lithium CR-P2 battery for senser based urinal/ pillar tap complete all as specified & directed. |
| 224 | S&F in repair 9V Ultralife Lithium battery for senser based urinal/ pillar tap complete all as specified & directed |
| 225 | S&F in repair 1.5V Duracell battery for senser based urinal/ pillar tap complete all as specified & directed |
| 226 | M&L for wall cladding of light weighted stone tile of size 300 x 75 mm / 220 x 75 mm / 240 x 60 mm with 15 - 20 mm thicknessas, Colour and size as approved by engr - in -charge. |
| 227 | Demolition of Cement Concrete (unreinforced) of any description and in any position complete all as specified and directed. |
| 228 | M&L for cement concrete typeE-2, 1:5:10 (40mm graded aggregate) in mass concrete and filling in sunken portion complete all as specified. |
| 229 | M&L for sunken treatment as following over it complete all as specified and as directed:-(a) Rendering 10 mm thiick in CM 1:4,(b) Two coats of tapecrete mixed (1:2) with cement slurry @ 3Kg/sqm per sqm or as per manufactures\"s instruction, surface finished even and smooth(c) Applying a coat ofbitumen primer @ 0.70 kg /sqm, applying one coat of hot bitumen 85/25 gde @ 2.6 kg/sqm (d) Applying one layer of 0.5 mm thick fibre tissue/APP membrane |
| 230 | M & L for complete removal mud/Cement/dust etc from old Chequered tile/ cement concrete surface and apply two coate of acrylic emulsion floor Paint of any colour as approved by Engr-in-Charge. Make : Indigo/ Asian/ Burger |
| 231 | Note :- The work described in these items shall be executed in bldgs up to (G+3 floor) hence the contractor shall make scaffolding arrangements, trestles, ladders etc and hessian clothes where required, for protection & all other safety precautions up to 04 storeys of buildings and the cost for the same is deemed to be included in the quoted unit rates. Note :- Removing building materials /old waste unwanted (debris) existing material of any description or any type etc.on alternate day as directed by the Engr-in-Charge and the cost for the same is deemed to be included in the quoted unit rates. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
