|
| 1 | Table dressing Ladies with Mirror (FD/MAP-II/07): M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge |
| 2 | Supply and fixing in replacement oflooking mirror of table dressing ladies with new looking mirror of 5 mm thick of Make:- Saint Gobain/ Modi Guard/ Atul/ Swastik ofsize 1250x450mm all specified in drg and as directed by Engineer -in- Charge. |
| 3 | Supply & fixing in replacement of entire frame of mirror of table dressing ladies made of teak wood/Shisham of size and shape all as specified in drg and directed by Engineer-in-Charge. |
| 4 | Supply & fixing in replacement of 6mm thick MR Gde plywood of back of Mirror of table dressing ladies. |
| 5 | S & F of entire cabinet/box of table dressing ladies made of 18/19mm thick BWR Gde plywood covered with laminated sheet of make:- Greenlam/ Archidlam/ Centurylam/ Samrat including 0.8mm thick PVC edge bending Tape of make:- Rehau/Fixin pasted with probond adhesive/glue alround all as shown on drg of Table dressing ladies . (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/ Samratply). |
| 6 | All as per Srl. Item No. 1.04 but of drawers of table dressing ladies all as shown and specified on drg. |
| 7 | S &F Stool Cabinettable dressing ladies made out of18/19mm thick BWR Gde plywood covered with laminated sheet of make:- Greenlam/ Archidlam/ Centurylam/ Samrat including 0.8mm thick PVC edge bending Tape of make:- Rehau/Fixin pasted with probond adhesive/glue alround all as shown on drg of Table dressing ladiesincluding aluminium CP handles and coster wheel arrangement on the base of stool. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/ Samratply). |
| 8 | S &F 32 density 100mm cushions with good quality tapestrycloth cover for detachable stool dressing shape & Size as specified indrawing or as directed by Engr-in-Charge |
| 9 | Material and labour for french polishing with best quality french polish on exposed surfaces to table dressing ladiesup to glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge.(FD/MAP-II/07) |
| 10 | Table dressing gents with Mirror (FD-230) : M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge |
| 11 | Supply and fixing in replacement oflooking mirror to table dressing gents with new looking mirror 5 mm thick of Make:- Saint Gobain / Modi Guard/Atul/Atul of size 760x380mm and shape as specified indrg and as directed by Engineer -in- Charge. |
| 12 | S & F in replacement of entire cabinet/box made of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet including 0.8mm thick PVC edge bending Tape pasted with probond adhesive/ glueall as shown on drg. Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/ Samratply). |
| 13 | Supply and fixing in replacement of drawers totable dressing gentsmade of 18/19mm thick BWR Gde plywood with 0.8mm thick laminated sheet on front side, 12mm thick of sides of drawer including with 6 mm thick MR Gde Plywood to bottom of drawers including almn anodised knob(dark brown) and all as shown on drg of Table dressing gents with mirror. |
| 14 | Supply and fixing in replacement of entire frame of mirror made of1st class hard wood teak/shisham including 3mm thick F1 key plate for hanging of Mirror all as size and shape as shown on drg. |
| 15 | Supply and fixingin replacement of back ply of mirror made of 6mm thick MR Gde plywood size and shape as shown on drg. |
| 16 | Material and labour for french polishing with best quality french polish on exposed surfaces to table dressing gents upto glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge.(FD-230) |
| 17 | Table dressing gents with Mirror (MAP) (FD/E6/MAP/16) : M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge |
| 18 | Supply and fixing in replacement of unserviceable cabinet of table dressing gents with mirror (MAP) made of 18mm thickBWR Gde plywood as per IS:303 of make:- Greenply/ Centuryply / Samrat/ BTSP(Gold) covered with 0.8mm thick laminated sheet both side of make:- Greenlam/ Centurylam/ Merino/Samrat including 0.8mm thick PVC edge bending Tape of make:- REHAU/ Fixin pasted with probond adhesive /necessary glue alround to table dressing gents all as specified and shown on drg. (FD/E6/MAP/16). |
| 19 | Supply and fixing in replacement oflooking mirror to table dressing gents with new looking mirror 5 mm thick of Make:- Saint Gobain / Modi Guard/Atul/Atul of size 1200 x 600mm and shape as shown on drg and as directed by Engineer -in- Charge. |
| 20 | S & F back ply of Mirror frame of 6mm thick of Table dressing gents with mirror (MAP) all as specified and shown on drg. (FD/E6/MAP/16) |
| 21 | Supply and fixing in replacement of complete frame of mirror made 1st class hard wood teak all as specified and shown on drg of table dressing gents with mirror (MAP). (FD/E6/MAP/16) |
| 22 | Supply and fixing in replacement of 75mm long stainless steel hinges to table dressing gents with mirror all as per shown on drg complete and as directed by Engr-in-charge. (FD/E6/MAP/16) |
| 23 | Supply and fixing in replacement of glass shelf of table dressing gents with mirror of size 600x100mmx 5.0mm thick all as specified and shown on drg and directed by Engr-in-Charge. (FD/E6/MAP/16) |
| 24 | Material and labour for french polishing with best quality french polish on exposed surfaces to table dressing gents upto glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge.(FD/E6/MAP/16) |
| 25 | Table bed side (FD/E6/MAP/15 (R) & FD/MAP/07) M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge |
| 26 | Supply and fixing in replacement of Top of table bed side of size 450 x 450mm x 18mm thick made of MR Gde plywood as per IS:303 of make:- Greenply/ Centuryply / Samrat/ BTSP(Gold) covered with 0.8mm thick laminated sheet both side of make:- Greenlam/ Centurylam/ Merino/Samrat including 0.8mm thick PVC edge bending Tape of make:- REHAU/ Fixin pasted with probond adhesive /necessary glue alround to top of table bed side all as specified and shown on drg. (FD/E6/MAP/15 (R) & FD/MAP/07) |
| 27 | All as per Srl item No. 4.01 here-in-before but sides of Table bed side all as specified and shown on drg. (FD/E6/MAP/15 (R) & FD/MAP/07) |
| 28 | All as per Srl item No. 4.01 here-in-before but bottom of Table bed side all as specified and shown on drg. (FD/E6/MAP/15 (R) & FD/MAP/07) |
| 29 | All as per Srl item No.4.01 here-in-before but back of Table bed side made of 12mm thick MR Gde plywood all as specified and shown on drg. (FD/E6/MAP/15 (R) & FD/MAP/07) |
| 30 | S & F in replacement of complete upper drawers of table bed side MAP with new drawers made of 18mm thick MR Gde plywood with 0.8mm thick laminated sheet including 0.8mm thick PVC edge bending Tape pasted with probond adhesive/glue alround on front of drawer, 12mm thick of sides of drawer including with 6 mm thick MR Gde Plywood to bottom of drawers including 75mm long CP handle and all as specified and shown on drg of table bed side. (FD/E6/MAP/15 (R) & FD/MAP/07). |
| 31 | All as per item No. 4.05 here-in-before but lower drawer of table bed side MAP. (FD/E6/MAP/15 (R) & FD/MAP/07). |
| 32 | Supply and fixing in replacement of unserviceable portions of MS square pipe of Table bed side MAP with 18mm square conduit pipe of wall thickness 18 guage of make:- Appolo/Nizon or ISI mark duly electric welding all around of pipe completeall as directed by Engr-in-Charge. (FD/E6/MAP/15 (R) & FD/MAP/07). |
| 33 | Supply and fixing in replacement of unserviceable telescopic channel with new one of size 350mm of make:- Godrej/Hettich/Ebco all as shown on drg and specified and directed by Engr-in-Charge.(FD/E6/MAP/15 (R) & FD/MAP/07). |
| 34 | Supply and fixing in replacement of unserviceable handle made of CP all as specified and shown on drg and directed by Engr-in-Charge. (FD/E6/MAP/15 (R) & FD/MAP/07) |
| 35 | Material and labour for painting to frame of Table bed side MAP with synthetic enamel black paint including preparation of surface with rubbing with emery paper and providing 04 Nos PVC rubber shoes to leg frame of Table bed side asspecified and directed by Engineer-in-Charge. (FD/E6/MAP/15 (R) & FD/MAP/07). |
| 36 | Chair writing(FD/E6/MAP/12) M&L for Removing of unserviceable/broken parts ofchair writing cushioned MAPwithout damaging of other parts of chair,supply and fixing new parts as shown on drg and specified. |
| 37 | Material and labour for Repairand painting to frame of Chair writingwith synthetic enamel black paintincluding preparation of surface with rubbing by emery paper and providing 02 Nos PVC hard rubber as stopper to the bottom of theframeall asspecified and directed by Engineer-in-Charge. |
| 38 | Supply and fixing in replacement of seat of Chair writing cushioned made of 12mm thick curve plywood MR Gde upholstery with fabric and moulded polyurethane foam, foam shall be 50mm thick and shall be moulded with density 50-55 kg per cubic mtr Thick and hardness 20 +/- 2Kg on hampden machine, with PVC lipping all around restall as shown on drg and directed by Engr-in-Charge. |
| 39 | All as per Srl. Item No. 5.02but back form shall be designed with contoured lumber support for extra comfort |
| 40 | Supply and fixing of arm rest made of black integral skin polyurethane with 75-78 shore \"A\" hardness and reinforced with MS insert, it shall be scratch and wheather resistenthand-rest sections to have slope towards front. |
| 41 | Chair school with hand board(FD/E6/MAP/05) M&L for Removing of unserviceable/broken parts ofchair school with hand boardwithout damaging of other parts of Chair school,supply and fixing new parts as shown on drg and specified. |
| 42 | Material and labour for Repairand painting to frame of Chair school with hand boardwith synthetic enamel black paintincluding preparation of surface with rubbing with emery paper and providing 04 Nos PVC hard rubber shoes to the bottom of thelegsall asspecified and directed by Engineer-in-Charge. |
| 43 | Supply and fixing in replacement of board top with new top made of 18/19mm thick MR Gde plywood as per IS:303 of make:- Greenply/ Centuryply / Samrat/BTSP(Gold) covered with 0.8mm thick laminated sheet of make:- Greenlam/Centurylam/ Merino/Samrat including 0.8mm thick PVC edge bending Tape of make:- REHAU/ Fixin pasted with probond adhesive /necessary glue alround to top of size 585x300 mm all as shown on drg and directed by Engr-in-Charge. |
| 44 | S&F one piece PVC seat & back lean distance of back should be 60 mm Make : suprme/cello/neelkamal or equavalentall as shown on drg and directed by Engr-in-Charge. |
| 45 | Side Board (FD-241) M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge |
| 46 | Supply and fixing in replacementof unserviceable pair of shutters of side board made out of 18/19mm thick MR Gde plywood covered with of make:- Greenlam/Archidlam/Centurylam/Samrat including 0.8mm thick PVC edge bending Tape of make:- Rehau/Fixin pasted with probond adhesive/glue alroundincluding piano type Stainless Steel hinges and including wall catcher of make:- Ebco/Hettich/Godrej of size and shape all as specified and shown in drg including aluminium anodized knob as shown on drg. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply). |
| 47 | All as per Srl item No 7.01 here-in-before but side of side board all as shown on drg |
| 48 | All as per item No. 7.01 here-in-before but top of side board. |
| 49 | All as per item No. 7.01 here-in-before but bottom of side board . |
| 50 | Supply and fixing in replacement of back of side board with 6mm thick MR Gde plywood of size and shape all as sqd and shown on drg. |
| 51 | Supply and fixing in replacement drawers of side board made of 18/19mm thick MR Gde plywood with 6mm thick ply at drawer bottom incl knob of size and shape all as spd and shown on drg. |
| 52 | Supply and fixing of shelf made of 18/19mm thick MR Gde plywood with 6mm thick teak wood beading all as shown on drg. |
| 53 | Supply and fixingin replacement of leg and batten frame bottom of side board made of 1st class hard wood teak/ shisham of size and shape as shown on drg. |
| 54 | Material and labour for french polishing with best quality french polish on exposed surfaces to side board upto glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge.(FD-241) |
| 55 | Bin Linen Multipurpose (FD/E6/MAP/09) M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge |
| 56 | Supply and fixing in replacementof unserviceable pair of shutters of Bin Linen Multipurpose made out of 18/19mm thick MR Gde plywood covered with of make:- Greenlam/Archidlam/Centurylam/Samrat including 0.8mm thick PVC edge bending Tape of make:- Rehau/Fixin pasted with probond adhesive/glue alroundincluding piano type Stainless Steel hinges and including wall catcher of make:- Ebco/Hettich/Godrej of size and shape all as specified and shown in drg including aluminium anodized knob as shown on drg. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply). |
| 57 | All as per Srl item No 8.01 here-in-before but side of Bin Linen Multipurpose shape & sizeall as shown on drg |
| 58 | All as per item No. 8.01 here-in-before but top of Bin Linen Multipurpose shape 7 size as shown on drg |
| 59 | Supply and fixing in replacement bottom of Bin Linen Multipurpose made out of only 18/19mm thick MR Gde plywood of size and shape shown on drg. |
| 60 | Supply and fixing in replacement of back of Bin Linen Multipurpose with 6mm thick MR Gde plywood of size and shape as shown on drg. |
| 61 | Supply and fixing in replacement drawers of Bin Linen Multipurposemade of 18/19mm thick MR Gde plywood with 6mm thick ply at drawer bottom incl knob of size and shape as shown on drg. |
| 62 | Supply and fixing of shelf made of 18/19mm thick MR Gde plywood with 6mm thick teak wood beading all as shown on drg. |
| 63 | Supply and fixingin replacement of leg and batten frame bottom of Bin Linen Multipurpose made of 1st class hard wood teak/ shisham of size and shape as shown on drg. |
| 64 | Material and labour for french polishing with best quality french polish on exposed surfaces to bin linen multipurpose upto glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. |
| 65 | Almirah Mess Utensils (FD-93M) M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge |
| 66 | Supply and fixing in replacementof unserviceable pair of shutters of Almirah Mess Utensils made out of 18/19mm thick MR Gde plywood covered with of make:- Greenlam/Archidlam/Centurylam/Samrat including 0.8mm thick PVC edge bending Tape of make:- Rehau/Fixin pasted with probond adhesive/glue alroundincluding piano type Stainless Steel hinges and including wall catcher of make:- Ebco/Hettich/Godrej of size and shape all as specified and shown in drg including aluminium anodized knob as shown on drg. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply). |
| 67 | All as per Srl item No 9.01 here-in-before but side of Almirah Mess Utensils all shape and size as specified in drg or as directed by Engineer-in-Charge. |
| 68 | All as per item No. 9.01 here-in-before but top of Almirah Mess Utensils shape and size as specified in drg or as directed by Engineer-in-Charge. |
| 69 | All as per item No. 9.01 here-in-before butbottom of Almirah Mess Utensils of size and shape shown on drg or as directed by Engineer-in-Charge. |
| 70 | Supply and fixing in replacement of back of Almirah Mess Utensils with 12mm thick MR Gde plywood of size and shape all as sqd and shown on drg. |
| 71 | All as per Srl item No 9.01 here-in-before but shelf of Almirah Mess Utensils all shape and size as specified in drg or as directed by Engineer-in-Charge. |
| 72 | Supply and fixingin replacement of leg and batten frame bottom of Almirah Mess Utensils made of 1st class hard wood teak/ shisham of size and shape as shown on drg. |
| 73 | Material and labour for french polishing with best quality french polish on exposed surfaces to Almirah mess utensils upto glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. |
| 74 | Table Centre (FD-274)M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge |
| 75 | Supply and fixing in replacement of Top of book case made of 18/19mm thick MR Gde plywood covered with laminated sheet of make:- Greenlam/Archidlam/ Centurylam/ Samrat including 0.8mm thick PVC edge bending Tape of make:- Rehau/Fixin pasted with probond adhesive/glue alround size and shape as shown on drg. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply). |
| 76 | All as per Srl. Item no. 10.01 but sides of book case. |
| 77 | All as per Srl. Item No. 10.01 but shutters of book case including piano type Stainless Steel hinges and including wall catcher of make:- Ebco/Hettich/Godrej and aluminium anodized knob. |
| 78 | Supply and fixing in replacement of bottom of book case made of 18/19mm thick MR Gde plywood with 4mm thick teak wood beading all as shown on drg. |
| 79 | All as per Srl. Item No. 10.01 but shelf of book case. |
| 80 | Supply and fixing in replacement of back of book case made of 6mm thick MR Gde plywood all as shown on drg. |
| 81 | Supply and fixingin replacement of leg and batten frame of book case made of 1st class hard wood teak/shisham of size and shape as shown on drg. |
| 82 | Material and labour for french polishing with best quality french polish on exposed surfaces to book case upto glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. |
| 83 | Form with /without back (FD- 77M & 78M) M&L for Removing of unserviceable/broken parts of Form with / without backwithout damaging of other parts of Form with / without back,supply and fixing new parts as shown on drg and specified. |
| 84 | M & L for Repair and painting to frame of Form with/without back steel with synthetic enamel Black paint and providing rubber shoes tolegs of form all as specified and as directed by Engr-in-Charge. (FD-1007 & 1008) |
| 85 | S&F in replacement of 25mm thick wooden plankof size 1800x255mm made out of second class hard woodsal/hollock for seat of Form with /without back size and shape all as shown on drg and directed by Engr-in-Charge. |
| 86 | All as per Srl item No. 11.02 here-in-before but back of the formof size 1800x150x19mm thick of form with back. |
| 87 | Table Computer (FD/E6/MAP/03) |
| 88 | M&L for repair and painting to frame of Table Computer with synthetic enamel black paint including preparation of surface with rubbing with emery paper and providing 04 Nos PVC hard rubber shoes to leg frame of Table Computer asspecified and directed by Engineer-in-Charge. (FD/E6/MAP/03). |
| 89 | Supply and fixing in replacement of Top of table computer of size 900x600mm,18mm thick of BWR Gde plywood as per IS:303 of make:- Greenply/ Centuryply / Samrat/ BTSP(Gold) covered with 0.8mm thick laminated sheet both side of make:- Greenlam/ Centurylam/ Merino/Samrat including 0.8mm thick PVC edge bending Tape of make:- REHAU/ Fixin pasted with probond adhesive /necessary glue alround to top of table Computer all as specified and shown on drg. (FD/E6/MAP/03). |
| 90 | All as per Srl. Item No.12.02 here-in-before but tray of key board of size 450 x 300mmincluding telescopic channel of Table Computer all as specified and shown on drg and directed by Engr-in-Charge. (FD/E6/MAP/03). |
| 91 | All as per Srl. Item No. 12.02 here-in-before but shelf of Table computer of size 450x300mm . (FD/E6/MAP/03). |
| 92 | All as per Srl. Item No. 12.02 here-in-before but sides of Table computer of size 150x750mm. (FD/E6/MAP/03). |
| 93 | All as per Srl. Item No. 12.02 here-in-before but complete drawer with telescopic channel of Table Computer all as specified and shown on drg and directed by Engr-in-Charge. (FD/E6/MAP/03). |
