|
| 1 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Material & Labour for machine pressed rubber moulded precast coloured concrete interlocking paver block, any shape and size conforming to IS 15658–2006 of 80 mm thickness, grade M–40 with grey cement and pigments over and including a layer of sand cushioning, 25 mm thick complete all as specified and directed. |
| 3 | Material & Labour for machine pressed rubber moulded coloured precast concrete interlocking paver block, any shape and size conforming to IS 15658–2006 of 60 mm thickness, grade M–35 with grey cement and pigments over and including a layer of sand cushioning, 25 mm thick complete all as specified and directed. |
| 4 | Material & Labour for PCC 1:4:8, Type D–2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 5 | Material & Labour for 75 mm thick PCC 1:2:4, Type B–2 (using 40 mm graded crushed stone aggregate) as in path/floor provided with joints at every 1.50 incl finishing cement concrete surface even and smooth using extra cement laid in panels complete all as specified and directed. |
| 6 | Material & Labour for providing and laying at or near ground level factory made kerb stone of M–25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 8 | Material & Labour for 25 mm thick PCC 1:2:4, type B–0 (using 12.50mm graded crushed stone aggregates) for laying floor finishes such as tiles etc complete all as specified and directed. |
| 9 | Material & Labour for 8-10mm thick coloured paver tiles (Endura Tiles) of size 300 x 300mm in floors etc set and jointed in neat cment slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 10 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed. |
| 11 | Material & Labour for brick work with sub class \"B\" old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, also in foul condition drain work complete all as specified and directed. |
| 12 | Material & Labour for brick work with sub class \"B\" old size bricks using old servicable bricks including cleaning of old bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 13 | Material & Labour for brick work with sub class \"B\" old size bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4, also in foul condition drain work complete all as specified and directed. |
| 14 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 15 | Material & Labour for rough cast plaster complete as specified in SSR Part–I, clause 14.22 shall consisting of following:– firstly apply under coat in cement mortar 1:3 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg. which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied complete all as specified and directed. |
| 16 | Material & Labour for rendering 15mm thick in cement plaster 1:4 on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | Material & Labour for rendering 10mm thick in cement plaster 1:4 in narrow widths on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | Material & Labour for flush pointing to brick walls in cement mortar 1:4 complete all as specified and directed. |
| 19 | Material & Labour for preparation of new plastered /concrete surface of wall applying of two coats of cement base paint over a coat chalk whitening complete all as specified and directed. |
| 20 | Material & Labour for preparation of Old plastered /concrete surface of wall applying of two coats of cement base paint over a coat chalk whitening complete all as specified and directed. |
| 21 | Material and labour for preparation of new plaster surface on walls and applying two coats of white or colour wash complete all as specified and directed. |
| 22 | Material & Labour for rolled mild steel framed work as in door or gates (ornamental and intricate design of door)/ cattel trap of angle or other section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing conforming to Fe–410 (Gde E–250) quality \"A\" including dismantling of existing complete all as specified and directed. |
| 23 | Material & Labour for PCC 1:3:6, Type C–2 (using 40mm graded crushed stone aggregate) as in surface channels and drain complete all as specified and directed. |
| 24 | Material & Labour extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, mould, mitred / stopped end etc complete all as specified and directed. |
| 25 | Supply and fixing in repair 300mm bore reinforced cement concrete pipes, class NP–2 with one collar per length of pipe complete all as specified and directed. |
| 26 | Dismantling dilapated /decayed posts or struts (wood, steel or R.C.C.) of any section /height, including taking out embedded portion, embedded in concrete /brick work /masonry /natural ground and each n exc 0.5 cum in volume below GL, getting out and removing surplus soil to a distance n exc 50 m and making good complete all as specified and directed. |
| 27 | Material & Labour for PCC type C–2 1:3:6 (40 mm graded crushed stone aggregate) as in foundation, filling and mass–concrete and like filling in fencing post complete all specified and directed. |
| 28 | Supply & Fix of mild steel section of any type or size as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe–290 Gde E–165 complete all as specified and directed. |
| 29 | Supply & Fix of mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, hooking ends complete all as specified and directed. |
| 30 | Supply & Fix of mild steel screw bolts (machine made) of 10 mm dia, with hexagonal or square heads at one end and screwed the other and screwed end to be fitted with round washers and one hexagonal or square nut, length of bolt n exc 5 cm long complete all as specified and directed. |
| 31 | Dismantling of fencing wire mesh incl barbed wire fencing of any type/size and in any position, neatly coiled and removing from site complete all as specified and directed. |
| 32 | Supply and Fixing chain link fencing size 100mm x 100mm (3.8mm thick dia wire) including line wires and any type of standards, rails, straining bolts etc., including provision of binding wire fencing complete all as specified and directed. |
| 33 | Supply and Fixing chain link fencing size 50mm x 50mm (3.8mm thick dia wire) including line wires and any type of standards, rails, straining bolts etc., including provision of binding wire any type fencing complete all as specified and directed. |
| 34 | Supply and fixing anti climb fencing, high-tensile wire (4-6mm) for physical barriers, Welded mesh fencing, grid-like barrier made from steel wires electrically welded at intersections, creating rigid panels that offer superior security and durability compared to woven fences, available in coated finishes for corrosion resistance, area of mesh less than or equal to 0.0025 sqm and used for high-security perimeters, general demarcation, and various commercial or industrial needs.features are strength, rigidity, ease of installation, and high visibility, making it difficult to cut or climb, especially with anti-climb designs like V-mesh complete all as specified and directed. |
| 35 | Material & Labour for preparation of new steel and iron surfaces of any description, not otherwise dscribed, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 36 | Supply & Fix in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. |
| 37 | Material & Labour for preparation old steel and iron surfaces (gates & angle iron posts) of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 38 | Material & Labour for Mirror polishing on existing Kota stone/ marble stone work where ever required to give high gloss finish including repair/ replacement of broken kota stone/marble stone complete all as specified and diected. |
| 39 | Material & Labour for providing and fixing stainless steel (Grade 304) railing/door/wicked gate and similar works made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 40 | Supply and fixing of PVC water storage tank of 500 ltrs capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20mmGI pipe connection including locking arrangement with ball valves high pressure with epoxy coated aluminium rod and high density plastic ball fixed and including taking down existing complete all as specified and directed. |
| 41 | Supply and fixing of prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridge, vally gutter etc fixed with self tapping screws or using J hook where as required complete all as specified and directed. |
| 42 | Supply and fixing of prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridge, vally gutter etc fixed with self tapping screws complete all as specified and directed. |
| 43 | Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 44 | Supply and fixing in repair Steel rolling shutters 1.25mm, withball bearing, as specified including top cover, anchoring rod, pipe shaft, Hood cover 1.25 mm thick, curtain, hold fast stopper, square bar guide channel, bracket plate, lock plate, handle, sliding lock, pulling hook, hasp and staple and one shop coat of primer; erected in position as directed by Eng- In- charge, push pull or manual type including dismantling of existing complete all as specified and directed. |
| 45 | Material & LabourforWater proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of cleaning of concrete surface or plaster surface of roof and applying evenly a bitumen primer conforming to IS 3488@ 0.30Kg per sqm followed APP modified polymeric water proofing membrane minimum weight 3.6kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 gm per sqm) as per manufacturer\"s instruction and including taking the APP membrane will be required where the parapet wall exceed 45cm for carrying over and taking into parapet walls, cut out neatly a horizontal groove 6.5 cm deep, 7.5 cm wide section with lower edge at not less than 15 cm above the graded roof surface and groove shall be finished smooth withcement mortar 1:4, where the parapet wall height is 45cm or less no grove will be required as the water proofing treatment will be carried over the top of parapet wall complete all as specified and directed. |
| 46 | Material & Labour for dressing of ground by cutting / removing vegetation, scrapping, clearing of all grass, shrubs, bushes, weeds, trees and saplings not exceeding 30cm in girth (measured at a height of 1m above the ground level) on either side of runway, taxi track, aprons and other places in techincal area by deploying jungle jims (06 feet) with tractors, operators including fuel, lubricant, etc. complete all as specified and directed.Notes :-(i)Cut grass/bushes/vegetation, etc. shall be removed outside premises area and or as directed, cost of the same shall be deemed to be included in the quoted rate. Nothing extra shall be paid to Contractor on any account.(ii)The requirement may vary as per quantum of work required |
| 47 | Supply & Fix of extruded Powder coated aluminium section as in window, ventilator, door and partition wall (powder coated 50 micron in brown/white colour) with movable /sliding, openable or fixed type shutter, frame or any pattern as directed, aluminum section medium weight of series B or size as directed by the Engr in charge cut to size, jointed toghter including rubber beading and all necessary fitting and including dismantling of existing complete all as specfied and directed.Note :– (i) Only aluminum sections measured and paid in this item and thickness of any member should not be more than 2mm. (ii) Rate quoted by the contractor shall deemed to be inclusive of all neecssary fittings and fixture such as roller, handle, Harrison locks including keys, etc. |
| 48 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick toughned glass with selected quality glass complete all as specified and directed.Note:- The unit rate quoted by contractor excludes cost of toughned glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 49 | Providing and fixing factory made uPVC white colour fixed framed work made of extruded profiles with wallthickness of 2.3mm(+-0.2mm). Window profile withhollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between twoshutters) (60mm x 74mm). Glazing bead (35mm x20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixinghardware and drainage of water etc. makingarrangement for fixing of hardware, EPDM gasket.1.2 +–0.2mm thick, galvanized steel Frame (28mm x21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with8mm x 100mm long fasteners- 5mm thick toughned glass withselected quality glass complete all as specified and directed.Note:- The unit rate quoted by contractor excludes cost of toughned glass and includes all other connected accessories Net opening will be measured for payment purpose. Area exceeding 1.00 sqm but not exceeding 2.00 Sqm each. |
| 50 | Supply and Fixing of Zebra blinds Made from premium quality 280 GSM Polyester Blend material, Zebra Blinds for windowsuse high-quality, durable materials to ensure that blinds can withstand daily use and maintain their functionality and appearance over time Fabric Material: Polyester, Thickness: 280 GSM,Blackout Capability: Semi/Complete Blackout,UV Protection: up to 90%, Operation and Mechanism: Cord Control System Allowsto Adjust the Blinds toDesired Height Included accessories: 1 N Blind, 2 N Wall Plugs, 2 N Wall Fasteners and The basic operation involves a beaded chain when pulled, fabric rolls neatly onto the roller tube. Accumulating the fabric in one single linear tube, unlike curtains which hang on to the sides of the window complete all as specified and directed. |
| 51 | Supply & Fix of 5-8 mm thick colour PVC panel, hollow profile PVC wall paneling/ lininginclusive of fixing arrangement including screws, side beading, angle, U- channelfixing on wall as per specification and dismantling of existing panneling complete all as specified and directed. |
| 52 | Material & Labour for Granite (of any type) 20-22mm work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, gate pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified and directed. |
| 53 | Supply & Fix toughened sheet glass 4.8 mm thick in glazing any size in each pane with rubber and aluminium beading / packing with rubber gasket to fix in Door/Window/Fixed wall/Parition wall complete all as specified and directed. |
| 54 | Supply & Fix 10/12mm thick block board grade 2 quality interior grade decorative type with decorative face veneer on one face fixed with screws to timber frame work as in partition board, shelves, with laminates on both faces for cabinets, bottom, side walls complete all as specified and directed. |
| 55 | Material & Labour for Cement mortar as in screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 56 | Note:-Amount of credit ofRs. 138830.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender. |
