|
| 1 | Taking down ceiling fans 1400 /1200 mm sweep ,sealing cable end ,dismantling blade & removing the sameand refixing on same location or other location of any type/make and size carefully from fan hook, and transporting from any location in side army area to MES E/M store yard and back after repairing complete all as specified and directed. |
| 2 | Material and labour for painting of ceiling/exhaust fan complete with blades ,in situ with synthetic enamel paint by spraying including filling cavities with filler ,ones coat after cleaning all dust etccomplete complete all as specified and directed. |
| 3 | Rewinding Ceiling fan by cutting the existing copper winding of ceiling fan 1200/1400 MM capacity and make any type with super enamelled copper wire of suitable size incl all insulating materials varnishing and neating complete incl satisfactory testing of fan on full load to entire satisfaction of Engineer-in-Charge complete all as specified and directed. |
| 4 | Rewinding Ceiling fan by cutting the existing copper winding of ceiling fan Heavy Duty old model 1200/1400 MM capacity and make any type with super enamelled copper wire of suitable size incl all insulating materials varnishing and neating complete incl satisfactory testing of fan on full load to entire satisfaction of Engineer-in-Charge complete all as specified and directed. |
| 5 | Supply and fix in repairs fan bearing of size 6201/6202 suitable for ceiling fan 1200/1400mm sweep complete all as specified and directed. |
| 6 | Supply onlyrubber reels incl shackle clamp, bolts, nuts, washers split pins of appropriate size as required complete all as specified and directed |
| 7 | Supply only down rod made of 15mm dia GI pipe heavy duty 45 cm long incl machining/ threading/drilling hole of size suitable for nuts and bolts washer and split pin suitable for any size and make of fan complete all as specified and directed. |
| 8 | Supply only plastic canopy upper and lower of any size and make of ceiling fan fixed with suitable size of screws complete all as specified and directed. |
| 9 | Taking down heavy duty mettalic exhaust fan of size 200mm to 450mm sweep of any make and refixing on same location or other location carefully from site & transporting from any location inside Army areato MES E/M store yard for stripping of fan washing thoroughly of bearing/bush by petrol, washing fan blade body and painting as suitable colour etc thoroughly provision of new greasing replacement of worn out/defective unserviceable parts (wherever necessary) assembling the same incl provn of twisted twin core flexible wire upto 0.7 mtrs long size 24/0, 020 (ISI marked) and testing the fan on full load to entire satisfaction of EIC complete all as directed.Note :- (i) Defective/unserviceable parts replaced will be paid separately in respective item of Sch \"A\" as Supply only. (ii)The cost of taking down unserviceable parts included in this item. |
| 10 | Taking downPVC exhaust fan of size200 to 300mm sweep of any make and refixing on same location or other location carefully from site & transporting from any location inside Army areato MES E/M store yard for stripping of fan washing thoroughly of bearing/bush by petrol, washing fan blade body etc thoroughly provision of new greasing replacement of worn out/defective unserviceable parts (wherever necessary) assembling the same incl provn of twisted twin core flexible wire upto 0.7 mtrs long size 24/0, 020 (ISI marked) and testing the fan on full load to entire satisfaction of EIC complete all as directed.Note :- (i) Defective/unserviceable parts replaced will be paid separately in respective item of Sch \"A\" as Supply only. (ii)The cost of taking down unserviceable parts included in this item. |
| 11 | Taking downheavy duty air circulator fan of size400 to 600mm sweep of any make and refixing on same location or other location carefully from site & transporting from any location inside Army areato MES E/M store yard for stripping of fan washing thoroughly of bearing/bush by petrol, washing fan blade body and painting as suitable colour etc thoroughly provision of new greasing replacement of worn out/defective unserviceable parts (wherever necessary) assembling the same incl provn of twisted twin core flexible wire upto 0.7 mtrs long size 24/0, 020 (ISI marked) and testing the fan on full load to entire satisfaction of EIC complete all as directed.Note :- (i) Defective/unserviceable parts replaced will be paid separately in respective item of Sch \"A\" as Supply only. (ii)The cost of taking down unserviceable parts included in this item. |
| 12 | Taking down wall fan of size 200mm to 400mm sweep of any make and refixing on same location or other location carefully from site & transporting from any location inside Army areato MES E/M store yard for stripping of fan washing thoroughly of bearing/bush by petrol, washing fan blade body etc thoroughly provision of new greasing replacement of worn out/defective unserviceable parts (wherever necessary) assembling the same incl provn of twisted twin core flexible wire upto 0.7 mtrs long size 24/0, 020 (ISI marked) and testing the fan on full load to entire satisfaction of EIC complete all as directed.Note :- (i) Defective/unserviceable parts replaced will be paid separately in respective item of Sch \"A\" as Supply only. (ii)The cost of taking down unserviceable parts included in this item. |
| 13 | Rewinding the armature for 200mm to 300mmPVC sweep exhaust fan any make with super enamelled copper wire of suitable size with and including all insulating materials varnishing complete all as specified and directed. |
| 14 | Rewinding the armature for 200 to 450mmHeavy Duty mettalic exhaust fan any make with super enamelled copper wire of suitable size with and including all insulating materials varnishing complete all as specified and directed. |
| 15 | Rewinding the armature for air circulator fan400 to 600mm any make with super enamelled copper wire of suitable size with and including all insulating materials varnishing complete all as specified and directed. |
| 16 | Rewinding the armature for wallfan200 to 400mm any make with super enamelled copper wire of suitable size with and including all insulating materials varnishing complete all as specified and directed. |
| 17 | Supply and fix in repairs ball bearing of size suitable for exhaust/wallfan upto 450 mm sweep complete all as specified and directed. |
| 18 | Supply and fix in repairs for condenser ISI marked 230/240/250 volts AC 4 MFD suitable for exhaust fan incl condenser spacer and soldering of condenser wire to fan wire and fixing complete all as specified and directed. |
| 19 | Supply and fix in repair/ replacement of unsvfan capcitor 2.5 Mfd suitable for 1200/1400mm sweep ceiling fan complete all as specified and directed. |
| 20 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, includingfixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 21 | Material and labour for Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FR-LSH grade cable conforming to IS-694 1990 drawn in and including PVC Casing and Caping with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and directed. |
| 22 | Allas per item No 21 here-in-before butOne bell/buzzer point controlled by one push button on the same board with other switches or independent with cablescomplete complete all as specified and directed. |
| 23 | Allas per item No 21 here-in-before butfor One 3 pin 5 Amp switch socket outlet on independent board complete all as specified and directed. |
| 24 | Allas per item serial No 21 here-in-before but for One 3 pin 5 Ampsocket outlet on same board with other switches complete all as specified and directed. |
| 25 | Allas per item No 21 here-in-before but wiringwith 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete all as specified and directed. |
| 26 | Material and labour for Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FR-LSH grade cable conforming to IS-694 1990 drawn in and including PVC Conduit conclead with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and directed. |
| 27 | Allas per item No 26 here-in-before butOne bell/buzzer point controlled by one push button on the same board with other switches or independent with cablescomplete all as specified and directed. |
| 28 | Allas per item No 26 here-in-before butfor One 3 pin 5 Amp switch socket outlet on independent board complete all as specified and directed. |
| 29 | Allas per item serial No 26here-in-before but for One 3 pin 5 Ampsocket outlet on same board with other switches complete all as specified and directed. |
| 30 | Allas per item No 26 here-in-before but wiringwith 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete all as specified and directed. |
| 31 | Supply and fix switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and directed. |
| 32 | Supply and fix Bell push switch, flush type, 5 Amps 230 volt complete all as specified and directed. |
| 33 | Supply and fix socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as specified and directed. |
| 34 | Supply and fix switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as specified and directed. |
| 35 | Supply and fix switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as specified and directed. |
| 36 | Supply and fix ceiling rose surface bakelite 65x50mm three terminal complete all as specified and directed. |
| 37 | Supply and fix lamp holder insulated PVC/ Polycarbonate/ bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as specified and directed. |
| 38 | Supply and fix stepped type electronic fan regulator, two module size, flush type complete all as specified and directed. |
| 39 | Supply and fix Ding Dong AC. 230 volts,single pole complete all as specified and directed. |
| 40 | S& F in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 V complete complete all as specified and directed. |
| 41 | Material and labour forwiring with 2 runs of 1.5 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 1.5 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down oldwiring and type of conduit complete all as specified and directed. Note: 2 run of 1.5 Sqmm cable and 1 run of 1.5 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 42 | Material and labour forwiring with 2 runs of 2.5 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 2.5 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down oldwiring and type of conduit complete all as specified and directed. Note: 2 run of 2.5 Sqmm cable and 1 run of 2.5 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 43 | Material and labour for Sub main wiring with 2 runs of 4.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 44 | Material and labour for Sub main wiring with 2 runs of 6.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6.0 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 45 | Taking down old UNSV bulkhead/security fitting type and Supply and fixing in repairLED building security light of capacity 60 Watt made up of pressure die cast aluminium housing withhigh power LED as light source and lens embedded PC cover including electronic driver should have luminaire efficacy ≥110 lumens/watt,CRI>70 ,PF > 0.95,CCT=5700±300,IP66,impact resistance IK 07 ,inbuiltprotection against lightning , over voltage , short circuit and surge/spike protection upto 10kV including connection with PVC insulaed PVC sheathed, multistranded copper conductor cable of size 1.5 sqmmX 3 core from light fitting to ceiling rose complete all as specified and directed. |
| 46 | Supply and fixing in repairbatten type LED light fitting 1x 20W, 220V,AC decorative type with internal SPD upto 4kV and overload voltage protection upto 440V includingflexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 47 | Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed /surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 48 | Supply and fixin repairs 18 watt LEDrecessed/surface mounted luminaire with high brightness LED for glare-free homogenous illumination suitable for Armstrong/grid ceiling and fixture size in mm (LxWxH) 295x295x70complete all as specified and directed. |
| 49 | Supply and fixin repair LED surface/recess mounted round downlighter 12 W with pressure die-castsink and PC difuser in chrome finish diffuser with integrated driver,complete all as specified and directed. |
| 50 | Supply and fix in repair for street light bracket made out of 40mm bore light grade GI pipe ( minimum length 1.50mtr) with including 2X MS clamp of flat iron not less than 40X 6 mm with anchor fastner for fixing on wallduly painted with two coats of synthetic enamelled paint over a coat of red oxide primer on steel surfacescomplete all as specified and directed. |
| 51 | Material and labour Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm burieddirectly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 8 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etcRCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate)including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 including taking down old Earthing chambercomplete all as specified and directed. |
| 52 | Supply fix in repair/replacementMCB DB of sheet metal enclosure double door IP-43 SPN 8 way with 200 A rated bus barand grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed. |
| 53 | Supply and fix in repair/replacement MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and directed. |
| 54 | Supply and fix in repair/replacementMCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and directed. |
| 55 | Supply and fix in repair/replacementfor factory made, sheet steel distribution boards, IP-43 TPN, 4 Way,double door,with provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed. |
| 56 | Supply and fix in repair/replacementMCB Tripple pole & neutral 40 to 100 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series rupturing capacity providing in DB complete all as specified and directed. |
