|
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided forand removing rubbish to a distance n.exc 50m at low lying area |
| 2 | Dismantling timber scantlings 40 sq. cm and over in unframed work section, in any position |
| 3 | Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof covering including ridges. |
| 4 | Excavation of hard/dence soil in post holes (or similar holes) each n exc 0.5 Cum getting out returning ,filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25cm ,watering complete all as specified and directed. |
| 5 | Excavation in trenches in hard/dense soil n.exc 1.5 mtr wide and n.exc 1.5 mtr deep & getting out soil for taking out/laying of cables etc.complete all as specified & directed by Engr-in-Charge. |
| 6 | Returning, filling in, including spreading, levelling watering and well ramming in layers not exc 25 cm.complete all as specified & directed by Engr-in-Charge. |
| 7 | Removing excavated mateials n.exc 50 mtr & depositing where directed at a level n.exc 1.5 mtr above the starting point.complete all as specified & directed by Engr-in-Charge. |
| 8 | Surface excavation n,exc 30cm deep and averaging 15cm deep & getting out in hard & dence soil. |
| 9 | M&L for hard core of gauge n,exc 63mm, deposited , spread and levelled in layers n,exc 15cm thick, watered and rammed to a true surface broken stone. |
| 10 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 11 | M&L for cement concrete type C2 1:3:6(40 mm graded aggregate) in foundations, filling and mass concrete or for fixing of RCC/ angle post complete all as specified and directed |
| 12 | M&L PCC 1:4:8 type D2 ( 40 mm graded aggreage ) as in foundation/sub base complete all as specified and as directed. |
| 13 | Supply and laying new dry river sand laid in trenches 8 cm below the cable and 15 cm above the cable and punned to 18 cm as cable cushioning and cover complete all as specified and as directed. |
| 14 | Supply and laying of brick well burnt locally available sub class \"B\" laid over sand cushioning for cable protection in trenches width of brick perpendicular to the length of cable, complete all as specified and directed by Engr-in-Charge. |
| 15 | M &L for brick work with sub class \"B\" old size bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified and as directed. |
| 16 | Taking down chowkats or frames with shutters exc 1.50 Sqm and n.exc 4 Sqm each. (without taking off shutters from the frames) complete all as specified and as directed. |
| 17 | Taking down chowkats or frames with shutters n.exc 1.50Sqm (without taking off shutters from the frames) complete all as specified and as directed. |
| 18 | S&F Factory made decorative lamination finish single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58- Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. . Note: (a) For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable.Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made.(b) The quoted rate shall be inclusive of required size and dia of M.S. hold fast/ lugs or SS dash fasteners. |
| 19 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture, proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. Note: (a) Stainless steel butt hinges and necessary S.S screws shall be paid separately |
| 20 | S&F in repairstubular towel rail brass chromium plated , 20mm dia, 60cm longbetween flanges in repairs. Make- Prayag or equivalent. complete all as specified and as directed. |
| 21 | S&F200 mm length aluminum, anodised, barrel tower bolts of extruded section complete all as directed. |
| 22 | S&F 125 mm size of aluminum handles, cast type anodised complete all as directed. |
| 23 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed. |
| 24 | M&L for Mild Steel work as in flat iron for fix the steel framework foreaves board and wind tie complete all as specified and as directed . |
| 25 | S&F MS angle iron post & strut etc. in fencing including embedding in concrete and screwing etc. including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 GdeE-165(Non strucural Grade) complete all as specified and directed. |
| 26 | S&F for galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line to be wire measured) |
| 27 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and diameter of neck 5 to 10mm complete all as specified and directed. |
| 28 | Supply and fixing12mm dia mild steel round barsdiacut to length , bent to hook at ends for fixing as line wires to chain link fencing all as directed at site complete all as specified and directed.(Fe-290(GdeE-165) |
| 29 | S& F Steel work in tubular trusses as in post including special shaped washer etc. complete using ERW or induction butt welded tubes all as specified and directed by Engr-in-Charge. |
| 30 | M&L for MS work as in post,roof trusses (framed), trussed, purlins, (pipe/post,beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde- E- 250) complete all as specified. |
| 31 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm, n exc 10cm long and diameter of neck 16 to 20mm complete all as specified and directed. |
| 32 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed(Gde-Fe-290 GdeE-165.) |
| 33 | S&F Mild steel framed work as in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165at site complete all as directed. |
| 34 | S/F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified. |
| 35 | Fixing only PVC coated chain link fencing of size 75 x75mm mesh andincluding line wires, to any type of standards, rails, straining bolts, etc. includingprovision of binding wire complete all as directed. |
| 36 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 37 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridge/flusing/eves board of width or girth not less than 600mm complete all asspecified and as directed. |
| 38 | M&L for Applying evenly a tack coat of in dustrial bitumen 85/25 on fencing post up to ground level at the rate of 1.2 kg per sq.m including cleaning surfaces |
| 39 | M & L for 50mm thick cement concrete (1:3:6) type C-1 ( using 20mm graded agg.) as in floor finishing/Plinth protection cement concrete all as specified and diredted. |
| 40 | M&L for 100mm thick PCC 1:3:6 type C2, (40mm graded aggregate) as in Path/flooring, surface even and smooth without usin extra cement complete all as directed. |
| 41 | M&L glossy finish Machine pressed precast concrete interlocking paver block rubber moulded laid with Grey cement and pigment any size and shape conforming to IS 15658-2006 of 60mm thick M-35gradeover and including 50 thick sand cushion etc complete all as specified anddirected by Engr-in-Charge. |
| 42 | Taking down cement plaster of any description on brick or stone walls, Chajjas etc., including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 43 | Material & Labour for 15mm thick rendering in Cement Mortar 1:6 on stone masonry surfaces, finished even and smooth without using any extra cement complete all as specified and as directed. |
| 44 | Material & Labour for 15mm thick rendering in Cement Mortar 1:6 onbrick work or concrete surfaces, finished even and smooth without using any extra cement complete all as specified and as directed. |
| 45 | M&L for preparation of new surface and and applying two coats of cement base paint over a coat of white cement primeron walls |
| 46 | M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes , filling cracks with birla white putty and brooming to remove all dirt etc and applying one coat of Oil bound distemper on old prepared surfaces of walls all as specified and directed . |
| 47 | S&F3mm thick sheet glass, ordinary quality and glazing with oil putty in square n,exc 0.50 Sqm in each pane complete all as directed. |
| 48 | M&L preparation of new steel surfaces of any description, n exc 10cm in width or girth,not otherwise described and apply two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer |
| 49 | M&L preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 50 | S&F in repairs PVC valve less syphonic action type flushing cistern low level white, dual flush, ISI marked (IS: 7231)with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including32mm dia PVC long bend for squat pattern etc, set with concrete and making good to floor complete all as specified and as directed. |
| 51 | S&F in repairs Vitreous china water closet pan ( pedestal pattern), white including fixing bolts etc includingplastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and as directed. |
| 52 | S&F in repairs Vitreous China Wash hand basinwhite Oval shape, size 580 mm x 450 mm size,excluding taps, chain & plug & porcelain stopper butincl brackets, 40/32 mm diachromium plate coupling 32 mm dia, cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed. |
| 53 | S&F in repair swan neck Fancy type pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 54 | S&F in repair looking mirrorof selected quality glass, mounted on 6mm thick PVC boardand fixed to wooden plugs with chromium plated S S screws and cup washers complete all as specified and as directed. |
| 55 | S&F in repair fancy type 15mm bore, chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe complete all as specified and as directed. |
| 56 | S&F in repairs fancy type chromium plated 15 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 57 | S&F in repairs CP soap dish of approved size complete all as directed |
| 58 | S&F Sheet glass shelf/corner shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repairs complete all as specified and as directed. |
| 59 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 60 | Dismantling PVC/cement water tank exc 500 ltrs but n exc 1000 ltr capacity |
| 61 | S & F rotational moulded polyethylene water storage tank triple layered ( cylindrical vertical with closed top) hoisted and fixed in position of1000 liters capacity confiring to IS specification |
| 62 | M & L for galvanised light grade steel conduit of size 40 mm for laying cables in road crossings/drain crossings including necessary clamps/other accessories for laying the conduit along/across the drain, complete all as specified & directed by Engr-in-charge. Make - Jindal/Tata. |
| 63 | M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound, Grade \"A\". |
| 64 | Supply only PVC Coated chain link fencingmesh size of 75 mm x 75mm,wire thickness 3.15mm, PVC coating thicknes1mm, complete all as specified and directed. |
| 65 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm, 3.5 core as per IS 7098 incl. lugs/clamps to mount on walls/ ceiling/floors/other accessories necessary for installation, complete all as specified and directed by Engr-in-Charge. |
| 66 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, armoured heavy duty electric cable 1100 Volts grade with aluminium conductor of size 4 sqmm, 3 core as per IS 7098 incl. lugs/terminal block/clamps to mount on walls/ ceiling/floors/other accessories necessary for installation, complete all as specified and directed by Engr-in-Charge. |
| 67 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, armoured heavy duty electric cable 1100 Volts grade with aluminium conductor of size 6 sqmm, 3 core as per IS 7098 incl. lugs/terminal block/clamps to mount on walls/ ceiling/floors/other accessories necessary for installation, complete all as specified and directed by Engr-in-Charge. |
| 68 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm, 4 core as per IS 7098 incl. lugs/clamps to mount on walls/ ceiling/floors/other accessories necessary for installation, complete all as specified and directed by Engr-in-Charge. |
| 69 | M & L of2.5 sqmm x 3 C, copper cable- PVC insulated, sheathed, 650/1100 V grade alongwith sleeves to enclose and insulate the cable for connecting LED flood lights incl. terminal block, complete all as specified & directed by Engr-in-Charge. |
| 70 | Supply & Fixing LED street light fitting 70 W, 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 71 | S & F of Aviation Light/Beacon Light 10 W, single Phase 230 V AC, 50 Hz outdoor type with die-cast aluminum housing with Red polycarbonate dome for better illumination and heat resistant complete with integral driver, tower top mounting mechanism, corrosion resistantand complete with IP 65 protection complete.Make-M/sBajaj / Equivalent |
| 72 | S & F of waterproofLED fountain light-12 W, 230 V AC, 50 Hz, single colour (white) with Stainless Steel housing with toughened glass coverand heat resistant complete with integral driver, corrosion resistant and complete with IP 65 protection. |
| 73 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of SP and current carrying capacity 10 AMPin the street light junction box complete with connection testing and commissioning, complete all as specified & directed by Engr-in-Charge. |
| 74 | S & F of rigid non-metallic PVC conduit 20 mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, etc. |
| 75 | S & F of PVC junction box-3 way complete all as specified and directed by Engineer-in-Charge. |
| 76 | Supply, Installation, Testing & Commissioning of outdoor type LT Distribution Panel(CPRI approved as listed in Particular Specification) 415 V, 3-ph, 50 Hz capacity made out of CRCA sheet 3.15 mm thick outdoor pedestal type of size not less than 01 x 0.75 x 0.3 m totally enclosed with front & rear opening, hinged doors alongwith suitable locking arrangements, weather and waterproofhaving copper busbars of capacity 400 A for R,Y,B and Neutral with heat proof colour code and mounted on insulators, stickering of switchgears, danger notice plate, including connecting incoming and outgoing cables with 40 x 40 x 6 mm angle legs of length not less than 70 cm fixed to necessary PCC 1:3:6foundation on ground comprising the following:-Incoming(a) MCCB 250A, 4P, 415 V, 50 Hz with rupturing capacity of 35 KA-01 No.Make:L&T/ Havells/ Schneider/C&S electric(b) LED Indicating lamps - 03 Nos. (c) Digital Three Phase VIF Meter with VLN, VLL, I1, I2, I3, F measurement -01 No.Make: L&T, Schneider, C&S electricOutgoing(a) 04 Nos. threaded (05 on each strip) busbar of current carrying capacity 400A each with heatproof colour code for R, Y, B & N.(Note: Cost includes necessary power wiring connections, lugs/ other accessories necessary for LT Panel) |
| 77 | Supply, Installation, Testing & Commissioning of outdoor type LT Distribution Panel (CPRI approved as listed in Particular Specification)415 V, 3-ph, 50 Hz capacity made out of CRCA sheet 3.15 mm thick outdoor pedestal type of size not less than 0.5 x 0.75 x 0.3 m totally enclosed with front & rear opening, hinged doors alongwith suitable locking arrangements, weather and waterproofhaving copper busbars of capacity 160 A for R,Y,B and Neutral with heat proof colour code and mounted on insulators, stickering of switchgears, danger notice plate, including connecting incoming and outgoing cables with 40 x 40 x 6 mm angle legs of length not less than 70 cm fixed to necessary PCC 1:3:6foundation on ground comprising the following:-Incoming(a) MCCB 100A, 4P, 415 V, 50 Hz with rupturing capacity of 35 KA-01 No.Make:L&T/ Havells/ Schneider/C&S electric(b) LED Indicating lamps - 03 Nos. (c) Digital Three Phase VIF Meter with VLN, VLL, I1, I2, I3, F measurement -01 No.Make: L&T, Schneider, C&S electricOutgoing(a) 04 Nos. threaded (05 on each strip) busbar of current carrying capacity 160A each with heatproof colour code for R, Y, B & N.(Note: Cost includes necessary power wiring connections, lugs/ other accessories necessary for LT Panel) |
| 78 | S & F double compression copper stainless steel gland for fixing armoured cable in panel of size 3.5 core 70 sqmm Al cable. |
| 79 | S & F double compression copper stainless steel gland for fixing armoured cable in panel of size 3.5 core 25 sqmm Al cable. |
| 80 | S & F double compression copper stainless steel gland for fixing armoured cable in panel of size 4 core 16 sqmm Al cable. |
| 81 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, includingfixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materialsfor taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed. |
| 82 | M&L for point wiring for one light/fan/bell with single core PVC insulated and unsheathed stranded FRLS copper conductor cable 1100 volts grade size 1.5 Sqmm (nominal area)and including PVC casing capping 40/25/20 mm width & its accessories required at site with one single core PVC insulated unsheathed 1.5 Sqmm (nominal area) stranded FRLS copper conductor as earth continuity wire and connected to earth dolly including PVC switch board onexisting wall surface for one light/fanpoint /bell point controlled by one number one way switch & making good the disturbed surface to match with existing surface/wall complete all as specified and as directed. |
| 83 | All as per Item No 2 here-in-before but for one 5 pin socket outlet 5 Amps on independent board with 1.5 Sqmm complete all as specified and as directed. |
| 84 | All as per Item 2 here-in-before but for one 5 pin socket outlet 15 Amps on independent board with 4 Sqmm copper cable FRLS & 4 Sqmm FRLScopper cable for earth continuity wire complete all as specified and as directed. |
| 85 | S&F of switch piano flush type 6 Amp single pole one way complete all as specified and as directed. |
| 86 | S&F of switch socket combination 5 Pin 6 Amp universal complete all as specified and as directed. |
| 87 | S&F for switch socket combination 5 Pin, 6/15 Amp universal complete all as specified and as directed. |
| 88 | S & F ceiling rose, 3 phase/PVC/Polycarbonate, isolated body complete all as specified and as directed. |
| 89 | S & F stepped type fan regulator electronic flush type on existing phenolic laminated sheet, etc, complete all as directed. |
| 90 | S&F VTPN distribution board with provision of MCCB as incommer,double door suitable for mounting MCB\"s/Isolators, 240 Volt,4 way with built in 160 A rated bus bar and with out MCCBcomplete after taking down old unserviceable DB\"s and including making good the distrubed surface and matching with existing colour complete all as specified and as directed. |
| 91 | S & F ofMCCB 63 A, 4P, 415V, 50 Hz with breaking capacity of 16KA complete all as specified and as directed. |
| 92 | S & F of MCB, SP, 240V, 6 to 32 Amps and \" C \" series breaking capacity 10 KA ISI markedcomplete, all as specified and as directed. |
| 93 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr-in-charge. |
| 94 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 95 | Supply and fixing circuit/ sub main wiring with two run of single core 06 Sqmm PVC insulated unsheathed stranded cable (FRLS) copper conductor drawn through PVC casing caping with all fittings including 06 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC casing capingand including PVC casing caping all as specified and as directed.Note : (i) Two run of single core cable 06 sq mm and one run earth wire 06 sq mm will be measured as one length |
| 96 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x 6mm thick burried in ground (earth pit not less than 2.25 m deep below ground level0with top edge of the plate not less than 1.5 m below normal ground level, connected toearthing lead wire 4 mm dia as earthing by means of bolts, nuts, check nuts, and washers of GI or steel, GI strip protected by 40 mm bore medium grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade GI, wire mesh charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC(1:3:6) type C-1, 50 mm thick pre-cast RCC(1:2:4) type B-1 normally mix cover slab reinforced with in 8 mm dia TMT bar 10 cm C/C both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft/loose/hard soil and disposal of soil to a distance n.exc 50 m and necessry testing on completion all as shown in electrical plate No 3 MES schedule part-I complete all as specified and as directed. |
| 97 | Earth contunity conductor or main earthing lead fixed to wall or batten or recesss or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire |
| 98 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including core cutting for mounting of exhaust fan withnecessary electric connections complete all as specified and as directed by Engr-in-Charge. Note : Core cutting of suitable dia in wall and making good, removal of debris from the site shall be included in quoted rates. |
| 99 | Supply & Fixing of LED street light fitting 35 W, 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection incl. fixing on wall with suitable MS flat iron braket or GI pipe in angle complete all as specified and directed. |
| 100 | Schedule of Credit |
