|
| 1 | Renovation of Guest House Phase2 ( Interior works) |
| 2 | Supply and fixing of TV Unit back with 18mm thick Prelaminated board confirmingto IS 12823:2015, Grade II, the edges covered with PVC edge bandingof approved shade and colour screwed on a frame work of Aluminium extruded sections of size sections of 50 X 50 x 1.4 mm in both horizontal and vertical direction at 600mm c/c fixed to the wall. Necessary opening, cutouts to be provided for effective wire management, complete as per drawing and instructions of the Engineer-incharge. |
| 3 | Supply and fixing of Luggage rack and shoe ledge of size 0.9 x 0.45 x 0.6m, the top of the luggage rack will be 25mm thick Pre- laminated board with Stainless steel trims inlay. A ledge of size 0.9 x 0.45m made of 18 mm thick Pre-laminated board to be fixed within the frame. The Pre-laminated board to confirm to IS 12823:2015, Grade II, with edges overed with PVC edge banding shouldbe of approved shade and colour, including all hardware, complete as per drawing and as per the instructions of the Engineer-incharge. |
| 4 | Supply and fixing of Writing table of size 0.91 x 0.45 x 0.75m. The writing table will continue as a ledge with a size of 1.2 x 0.2m all made from 25mm thick Pre-laminated board confirming to IS 12823:2015, Grade II with edges covered with PVC edge banding of approved shade and colour including all hardware, complete as as per drawing and the instructions of the Engineer-incharge. Cost to include one number of straight back chair with armrest made of rubber wood / engineered wood, with foam and Polyster fabric of approved colour for seat and back. Complete as per drawing and instructions of the Engineer-incharge. |
| 5 | Supply of Queen Bed of size 1.9m x1.53 x 0.30m (without storage), all made of Pre-laminated boardconfirming to IS 12823:2015, Grade II of approved colour and shade. The edges to be covered with PVC edge banding and Rounded corners on one side of the bed, A headrest of size 2.78 x 1.05m made of 18mm thick Prelaminated board / BWP Plywood, covered with 50mm thick 40 density foam and fabric fixed to the wall, complete with all necessary hardware, fittings, etc. as per the design(quote without matress) |
| 6 | Supply and laying of Dual Sided mattress of size 148 x 183 x 15 cms with outer cover of knitted fabric having layers of soft foam and High Density Foam with quilted foam border. The mattress will be flippable with Firm & Soft Sides. The mattress should have a warranty of minimum 7 years. The make and model must be approved by the Engioneer-incharge before purchase. |
| 7 | Supply and laying of foam mattress of size 89 x 183 x 12.7 cms with outer cover of knitted fabric having layers of soft PUF quilted foam and High Density hard foan with mesh fabric on the other side.The mattress should have a warranty of minimum 05 years. The make and model must be approved by the Engioneer- incharge before purchase. |
| 8 | Supply and fixing of wall mounted Bed side tables of size 0.45 x0.38 x 0.15m made of Pre-laminated boardconfirming to IS 12823:2015, Grade II with PVC edge banding of approved colour and shade, One drawer supported on sliding steel channels complete with all necessary hardware, fittings as per drawing and the instructions of the engineer-incharge. The bed side table can also be a part of the Bed during execution. |
| 9 | Supply and fixing of 5mm thick silver coated mirror of size 1.5 x 0.45m fixed on back and side frame made from 18mm thick Pre-laminated board . The Pre-laminated board to confirm to IS 12823:2015, Grade II with edges covered with PVC edge banding and should as per approved shade and colour including all hardware, complete as per drawing and as per the instructions of the Engineer-incharge |
| 10 | Providing and Fixing of suspended False ceiling consisting of G.I. frame work of standard sections and covered with 12mmthick gypsum board screwed to the frame. The joints between the sheets of gypsum board are to be covered with perforated jointing paper tape and flushed with jointing compoundto provide smooth and durable finish. Rate to Include Painting of the Gypsum ceiling with one coat of primer and two coats of premium acrylic emulsion paint of apporved colour & shade, complete as per design and as per the instructions of the Engineer-incharge. Note : Rate to include cutouts for light fixtures, trap doors in Plywood / Gypsum.Make: GI Channels: Gyproc, Gypsum Board: gyproc or equivalent. |
| 11 | Verticles of False ceiling consisting of G.I. frame work of standard sections and covered with 12mmthick gypsum board screwed to the frame. |
| 12 | Providing and fixing of 9mm thick PVCfalse ceiling of wooden shade, suspended with the frame work and accessories from the roof slab, beamsetc. by means of G I angles, J bolts, Tee runners and edge trim etc., cutting the openings for fixing light fittings, including cost of materails, labours, lead and lift finishing etc.complete as per design and the directions of the Engineer-incharge. |
| 13 | Touch-up with wall putty as required, filling of cracks , application of one coat ofinterior primer and two coats of Premium Emulsion paint. Make: Berger / Asian / Equivalent.as per the instructions of Engineer- Incharge . |
| 14 | Removal and disposal of Bathroom floor tiles, including the underlying mortar/adhesive layers, cleaning of the base surface, and proper collection and disposal of all debris. The work is to be carried out with care to avoid damage to surrounding fixtures, |
| 15 | Providing and fixing Ist quality Vitrified wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours,of any size as approved by Engineer-in-Charge, for flooring and dados,laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting the joints with Polymer Epoxy grout of matching shadecomplete. |
| 16 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry and labour as per the instructions of the Engineer- incharge. |
| 17 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete and labour as per the instructions ofthe Engineer-incharge. |
| 18 | Supply of Counter top Wash basin accessories, Size-560x415x200mm,and labour as per the instructions of the Engineer-incharge. |
| 19 | Supply & Fixing of pillar cock for wash basinand labour charge as per the instructions of the Engineer-incharge. |
| 20 | Supply & fixing of Waste coupling and labour charge as per the instructions of the Engineer-incharge. |
| 21 | Supply & Fixing soap dish and labour charge as per the instructions of the Engineer-incharge. |
| 22 | Supply & Fixing of Towel Ring and labour charge as per the instructions of the Engineer-incharge. |
| 23 | Supply & Fixing Double coat hookand labour charge as per the instructions of theEngineer-incharge. |
| 24 | Supply & Fixing of towel rail 24\"\" and labour charge as per the instructions of the Engineer-incharge. |
| 25 | Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook and labour charge as per the instructions of theEngineer-incharge. |
| 26 | Supply & Fixing of Angular stopcock withwall flange and labour charge as per the instructions of the Engineer-incharge. |
| 27 | Supply & Fixing of Bottle Trap and labour charge as per the instructions of the Engineer-incharge. |
| 28 | Supply & Fixing of Wall Mixer with provision for overhead shower and 115mm long bend pipe with wall flange and labour charge as per the instructions of the Engineer-incharge. |
| 29 | Supply & Fixing of Rose shower with revolving ball joint & 180 mm long shower |
| 30 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brassscrews and washers complete. |
| 31 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mmnominal bore |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mmnominal dia Pipes |
| 33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. oncealed work, including cutting chases and making good the walls etc. 25 mmnominal dia Pipes |
| 34 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work- Exposed on wall 25 mm nominal dia Pipes |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work- Exposed on wall 32 mm nominal dia Pipes |
| 36 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 37 | Providing edge moulding to stone counters, Vanities etc., including machine polishing toedge to give high gloss finish etc. complete as |
| 38 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) Frames/Chowkhat of size 80 x 50mm comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (Rates to include all hardware inclusive of M.S hold fast/lugs or SS dash fasteners). |
| 39 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) 25mm thick door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant.Door shutter to be fixed withstainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: Rate to also include all hardware including tower bolt and cylindrical lock) |
| 40 | Polishing Existing mosaic floor tiles using a sequence of progressively finer abrasive machine and polishing compounds (such as oxalic acid or commercial agents) to achieve a uniform, glossy finish, as per the latest edition of relevant Bureau of Indian Standards (BIS) codes. The process must include thorough surface preparation, intermediate cleaning between abrasive stages, and the application of a protective sealer upon completion to enhance durability and shine. Any existing damaged tiles shall be replaced and properly grouted prior to commencing the polishing work |
| 41 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 42 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVCinsulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. |
| 43 | Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductorsingle core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. |
| 44 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessedmedium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor singlecore cable etc as required. |
| 45 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 46 | Wiring for light / power plug with 2 X 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, along with 1 no. of 4 sq.mm FRLS PVC insulated copper conductor for loop earthing as required. |
| 47 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 12 Module (200mmX150mm) |
| 48 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 8 Module (125mmX125mm) |
| 49 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 6 Module (200mmX75mm) |
| 50 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm) |
| 51 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.-TV Cable |
| 52 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 A switch |
| 53 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 A socket outlet |
| 54 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 A switch |
| 55 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 A socket outlet |
| 56 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet |
| 57 | Supply and fixing of 3W LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec 13) : 2012, operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high power LEDs, having System Efficacy of > 120 lumens /watt, CCT: 3000K - 5700K, minimum CRI>70, .etc., complete with earth connection and not less than two years warranty. |
| 58 | Supply and fixing of 6W LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec 13) : 2012, operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high power LEDs, having System Efficacy of > 120 lumens /watt, CCT: 3000K - 5700K, minimum CRI>70, .etc., complete with earth connection and not less than two years warranty. |
| 59 | Supply of 9W/10W LED Mirror Light fitting with decorative grey end caps, polycarbonate body and opal acrylic diffuser etc. Makes: As per list of recommended brands. |
| 60 | Supply & Fixing of 48\" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 30W, air delivery not less than 220 cubic meter/min and a minimum service value of 7.0, with remote and without Regulator. Makes: As per list of recommended brands. |
| 61 | Supplying & fixing-flexible LED Strip Light in 5ms length CCT 2800 degree K,CRI>70%. efficacy>80 lumen per W, life>25000 burning hours and Compliance to IS 10322/IEC60598, LM79 & LM80. The LED are driven by HF electronic driver non integrated, with PF>0.95, power losss hould<5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM79. The operating in put voltage should be between 130 to275 V. BIS Approved with 2 years Warranty against any manufacturing defect working under standard electrical condition. |
| 62 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable |
| 63 | Supplyand fixing of following sizes of medium class PVC conduit along with accessories in surface/recess incluiding cutting the wall and making good the same in case of recessed conduit as required. 25mm |
| 64 | Supply installation testing and commissioning of 1no of Cat6 Tool less built-in crimping mechanism Information Outlet with Dust Cover Exceed ANSI/ TIA-568-C.2 and ISO/IEC 11801 standards with 1module face plate for Category 6 component performance & Compatible to T568A, T568B wiring pattern and UL-940V0 Rated Plastic &RoHS Compliant. |
| 65 | Supply installation testing and commissioning of 4 pair 23AWG Cat-6 UTP, flexible, double ended patch cords along with 2 nos of RJ 45 connectors with strain relief boots Compatible to T568A,T568Bspecifications including making connections to information outlets Lrngth: 2 mtr /7 ft |
