Tender For Regular Civil Maintenance Works In Main Plant And Other Infrastructure Buildings At Rrs 5 And 6, Rawatbhata-Rajasthan

TDR : 53801350

Tender Notice
BOQ

18 Days Left

Rawatbhata , Rajasthan

Tender Brief : Tender For Regular Civil Maintenance Works In Main Plant And Other Infrastructure Buildings At Rrs 5 And 6

Document Fees
Refer document

EMD
₹ 550834.0 /-

Tender Value
₹ 2.75 Crore /-

Submission Date
24-02-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earthwork in excavation in all types of ground substrata consisting of hard rock/ fragmented rock/soft rock/ordinary soils/filled up ground/ murrum requiring use of rock breaker, drilling, chiseling with mechanical/manual means etc. up to a depth of 1.5 m from the original ground level and dewatering if required for foundation of walls, columns, platforms etc. including backfilling with selected excavated materials in plinth and foundation trenches in layers not exceeding 200 mm thick, watering ramming etc. complete and disposing off the surplus materials to a maximum radially measured lead of 1.0 KM. as per drawings, design, safety and specifications and directions of the Engineer.Note :- Bidders should essentially visit and inspect the construction sites and determine themselves the right and safest method/s of excavation considering the safety of nearby structures and population, before quoting their item rates (Blasting is not permitted).
2	Supplying at site of good earth excavated and brought from outside (borrow pits/ stock piles) free from weeds, roots, rubbles and other foreign material including royalty and carriage and filling in trenches, plinth and sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering and lift upto 1.5m etc. complete (only consolidated fill shall be paid).
3	Providing and laying 150 mm thick stone soling under floors properly hand packed, filling interstices with spalls, gravels and inert fine material and consolidating to required gradient and camber, spreading, wateringetc. complete as per drawings, specifications and direction of Engineer.
4	Providing and laying in position cement concrete of 1:3:6(1 Cement: 3 coarse Sand: 6 Graded Stone aggregate 20 mm nominal size) -at all level , transporting of concrete to site, laying, consolidation, finishing, curing etc. all complete excluding cost of centering & shuttering, as per direction of Engineer-in-charge.
5	Providing and laying cement concrete of 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) in retaining walls, return walls, walls(any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed block, anchor block, window sills, fillets etc. at all level including transporting of concrete to site, laying including cost of finishing, curing etc. all complete excluding the cost of centering and shuttering as per specifications and direction of Engineer-in-charge.
6	Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of all grades grade for Reinforced cement concrete or other works using 20mm size stone aggregates including transporting of concrete to site for laying but excluding the cost of centering, shuttering and reinforcement, including cost of finishing, compaction, curing, approved chemical admixtures conforming to IS 9103 in recommended proportions for achieving slump not less than 120mm and water/cement ratio not more than 0.42 at all level & for all sections as per drawings, specifications & direction of Engineer-in-charge. Use of concrete retarding agent/accelerator conforming to IS 9103 shall also be done if situation demands so. Rates should be based on using 350 kg of OPC 43 grade cement per Cum of concrete.
7	Providing and laying TMT/HYSD, Fe 500D/Fe550D reinforcement bars of grade as specified in drawings/specifications and as directed by engineer conforming to IS : 1786 latest revision or the latest relevant code for RCC work including straightening, cutting, bending, placing in position and binding with 20 gauge annealed binding wire and cement mortar cover block of all size in C.M. 1:2 MIX etc. all complete- as per drawings , specifications & direction of engineer in charge.
8	Providing & laying Random Rubble masonry with hard stone in foundation and plinth level of building & upto 3.00 Mtr. height from NGL for boundary/compound wall with Cement mortar 1:6 (1 Cement:6 Coarse sand) including cost of labour, materials, curing, raking out the joints, finishing, scaffoldings etc. all complete as per drawing, specifications and direction of Engineer in charge.
9	Providing and laying Fly-ash brick masonry class designation- 75 (IS-12894 -latest revision) in cement mortar 1:6 (1 cement : 6 coarse sand) upto plinth level including cost of labour, materials, curing, finishing, scaffoldings etc. all complete as per drawings, specifications and direction of Engineer in charge.
10	Providing and laying Fly-ash brick masonry using Fly-ash building bricks of class designation-75 (IS-12894 -latest revision) in cement mortar 1:6 (1 cement : 6 coarse sand) in superstructure above plinth level up to floor five level as per specifications and direction of Engineer including cost of labour, materials, curing, finishing, scaffoldings etc. all complete as per drawings, specifications and direction of Engineer in charge.
11	Pointing on stone work with cement mortar 1:3 (1 cement :3 fine sand): Raised and cut pointing including finishing, curing, scaffoldings etc. complete at all height as per drawing, specification and direction of Engineer-in-charge.
12	Providing and laying 6mm thick cement plaster (1 cement : 3 sand) in single coat on RCC ceiling face for interior plastering at all levels including necessary grooves at the junction of RCC and brickwork arises, internal rounded angle, chamfers and / or rounded angles not exceeding 80 mm in girth including scafolding, finishing, curing etc all complete as per drawing,specifications and direction of engineer in charge.
13	Providing and laying 20 mm thick cement plaster of mix:- 1:4 (1 cement: 4 fine sand) including finishing, curing, scaffoldings etc. complete at all height as per drawing, specification and direction of Engineer-in-charge.
14	Neat cement punning including finishing, curing, etc. including cost of material and labour complete as per direction of Engineer-in-charge.
15	Providing and fixing polished Kota stone slab flooring 20 to 25 mm thick in flooring, tread of steps, landing, laid over 20 mm (average) thick base of cement mortar 1:4 (1 Cement: 4 sand): and jointed with white cement slurry mixed with pigment to match the shade of the slab, including edge molding and cutting three nos. grooves neatly in longitudinal direction of steps for antiskid purpose, rubbing and polishing complete, including cutting of slot (without edge splitting) using mechanical means for receiving the handrail supports including finishing & curing work at all level etc. completeas per drawing,specification & direction of Engineer-in-charge.
16	Providing and laying premium quality polished vitrified tiles of size 600mm x 600mm of approved shade and conforming to IS: 15622 (latest revision) of H&R JOHNSON (Double charge Magic bush Series) /KAJARIA(Double charge K-62 & K-63 series)/ NITCO (Double charge Nano vitrified premium) as approved, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 sand) in floors and skirting including grouting the joints using special tile grout FEVIMATE-TG of Pidilite or similar approved makeincluding covering of tiles with 3mm th. PVC tile protection sheet over it for protection of tiles from paint stains, scratch during various finishing activities including finishing and curing at all levels etc. all complete as per drawing, specification and direction of Engineer-in-charge.
17	Providing and fixing premium quality mat finished ceramic floor tiles of size 300x300mm and 6mm thickness conforming to IS: 15622 (latest revision) ofH&R JOHNSON (pure mat finish Rustic/Lenox series)/KAJARIA (Digital floor -stain mat plain & printed mat finish) / NITCO (Crust digital floor tiles premium) as approved in required shade, laid on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 sand) including grouting the joints using special tiles grout FEVIMAT - TG of Pidilite or similar approved make complete including covering of floor tiles with 3mm th. PVC tile protection sheet over it to protect the tile from painting stains and scratches during various finishing activities including finishing and curing work at all level etc. all complete as per drawing, specification & direction of Engineer in charge.
18	Providing and fixing premium quality special printed ceramic glazed wall tiles of size600mmx300mm and 6mm thickness of approved shade in base and highlighter conforming to IS: 15622 (latest revision) ofH&R JOHNSON wall tiles (DIGITAL PRINTED SERIES) / KAJARIA (Digital & power line) / NITCO (Cosmos digital wall tiles)as approved in skirting and dado over 12mm thick bed of cement mortar 1:3(1 cement :3sand) including grouting the joints using special tiles grout FEVIMAT - TG of Pidilite or similar approved make complete including protecting the tiles from painting stains and scratches during various finishing activities including finishing and curing work at all level etc. all complete as per drawing, specification & direction of Engineer in charge.
19	Providing and fixing in full width & length 15mm to 18mm thick Granite Black or any other approved shade/ colour / texture gang saw cut mirror polished, premoulded, machine cut for kitchen platforms, fascias, walls and similar locations laid over 20 mm thick base cement mortar 1:4 (1 Cement :4 sand ) with joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, edge moulding and polishing to edge to give high gloss finish etc. complete at all levels: Area of slab over 0.50 Sqm. including finishing & curing work at all level etc. complete as per drawing, specifications and direction of Engineer-in-charge.(Base rate of granite shall not be less than Rs. 1800 / Sqm) Note:- Sample of granite shall be approved by EIC before bulk purchase.
20	Providing and fixing factory made 30mm thick Flush door shutter single / double leaf conforming to IS ; 2202(part-1) of make KITPLY / GREENLAM / CENTURYas approved by EIC, with Block board core & frame of well seasioned hard wood, cross band made from BWP grade veneers andcommercial BWP grade face veneers on both sides of shutter including providing and fixing 2nd class teak wood leaping of suitable size and shape all around the edges including approved brand stainless steel fixtures like Tower bolt (size-250mmx12mm), Tadi latch (300mmx14mm), Aldrop (300mmX16mm), Handles plate type - 100mm size (size shall be confirming to IS:208) - 02 nos, Magnetic Cather etc. painting two coats of synthetic enamel paint over a coat of primer of approved brand etc. complete as per drawings, specifications and direction of Engineer. Note - actual area of shutter will be paid.
21	Providing and fixing Orissa pattern Water Closet (OP 23 (Open rim) of H & R Johnson / Orissa C0117 of Parryware/ Orissa COVYS 3010104 of CERA as approved with low level placed PVC flushing cistern (Dual Flush Tank {white} of H & R Jhonson / CERA/ Parry ) connected with 32 mm dia PVC flush pipe with all fittings and brackets with C.P. brass angle cock with CP flange (Clarion cat No. CQT 23059 make of JAQUARor similer approved quality in KOHLER / GROHE and 15 mm dia high quality PVC inlet connection of required length with all accessories, fittings & fixtures of best quality and brand as per drawing, specification and direction of EIC. Item includes essentially following.(a). Orissa pattern white glazed viterous china W.C. pan of size 580mm x 440mm of approved brand and 100mm dia sand cast iron \"P\" trap.(b). Low level placed PVC flushing cisternDual Flush Tank (white) of H & R Johnson ( P2829PW) / Parry (Slim-line E8110 Deluxe) / Cera (Corona B1020102) as approved with all accessories complete.(c). 15mm dia PVC inlet connection of required length of approved brand with heavy duty C.P. brass unions and rubber washer etc.(d). 15mm dia C.P. brass angle valve with C.P. flange of superior quality (Jaquar Clarion cat. No.CQT 23059 or similer approved quality of KOHLER/GROHEas approved).
22	Providing and fixing European type white glazed vitreous china ware water closet concealed S trap of \"H&R JOHNSON\" (Ruby concealed trap EWC P0448PW / \"PARRYWARE\" (NIAGARA C0252(S) / \"CERA\" (CIGNIA Concealed S1051108 S trap) as approved withGermfree EWC solid seat cover with C.P. brass hinges and rubber buffers of approved brand, with low level placed PVC flushing cistern (Dual Flush Tank white) connected with 32 mm dia PVC flush pipewith fittings and brackets, 15mm dia PVC inlet connection of required length and approved brand, 15mm dia C.P. brass angle valve with C.P. flange of superior quality all complete as per drawing, specification and direction of engineer in charge comprising following accessories:(a). White vitreous china wash down European type W.C. pan with white vitreous china \"S\" trap of approved brand.(b). Germfree EWC solid seat cover (white) of H&R Johnson ( P0424PW) / Parry (E8094) / Cera (Carina plus B1510106) with C.P. brass hinges and rubber buffersof approved brand (c). Low level placed PVC flushing cisternDual Flush Tank (white)of H & R Johnson ( P2829PW) / Parry (Slim-line E8110 Deluxe) / Cera (Corona B1020102) as approved with all accessories complete.(d). 15mm dia heavy duty PVC inlet connection ofrequired length and approved brand with brass unions complete.(e). 15mm dia C.P. brass angle valve with C.P. flange of superior quality (Jaquar clarion cat. No. CQT 23059 or similer approved quality of KOHLER/GROHE as approved).(f).Jet spray provision of Jaquar make ALE 547 with 1Meter PVC tube (stainless steel) with 01 nos 15mm dia CP brass angle valve with Cp flange of Jaquar clarion (Code CQT 23059) or similer approved quality of KOHLER/GROHE as approved.
23	Providing and fixing in position white glazed vitreous china ware wash basin \"H&R JOHNSON\"/ \"PARRY\"/ \"CERA\"as approved of following accessories jointed watertight as per drawing, specification and direction of EIC as given below :(a). One no. wash basin of make \"H&R JOHNSON\" (P1015PW size 500 x 400 mm)/ \"PARRY\" (Indus C0471 size 500x400 mm) / \"CERA\" (Counsel S2040101 size 510x400mm) as approved.(b). One pair of wall bracket of 35mm x 35mm x 5mm M.S. angle painted with two coats of synthetic enamel paint over a coat of primer of approved quality and make.(c). One no. 32mm dia C.P. brass waste coupling with C.P. grating of Cat. No. ALD709 of Jaquar or similar approved quality of KOHLER / GROHE as approved.(d). One no. 32mm dia C.P. brass bottle trap with wall flange and connected C.P. pipe of cat. No ALD 769 of Jaquar or similar approved quality of KOHLER/GROHE as approved.(e). Two nos. 15mm dia C.P. brass angle valve with C.P. flange of superior quality (Jaquar CLARION cat. No. 23059 or similar approved quality of KOHLER / GROHE as approved).(f). One no. central hole C.P. brass basin mixer without popup waste system with 450mm long braided hoses of superior quality (Jaquar clarion cat. no. CQT 23167B or similar approved quality of KOHLER/GROHE as approved).(g). 32mm dia B class G.I. waste pipe (concealed) of required length (from bottle trap to nahani trap) including painting with anti corrosive bituminous paint.
24	Providing and fixing C.P. brass Angular stop cock with C.P. flange and PVC/CP connecting pipe of required length for geyser points of superior quality (Jaquar Clarion cat no. 23059 or similar approved quality of GROHE/KOHLER) as per specification and direction of EIC.: 15 mm nominal bore.
25	Providing and fixing 40mm dia. nominal bore (Exposed on wall) class \"B\" G.I. pipe of approved brand confirming to IS 1239 of following nominal bore with all fittings and specials of heavy duty as required including cutting the walls, floors trenching & reffilling as required, making them good, claimping on wall of approved quality claimps as per specifications, testing the line etc. complete as per drawings, specifications and direction of engineer.
26	Providing and fixing 50mm dia. nominal bore (Exposed on wall) class \"B\" G.I. pipe of approved brand confirming to IS 1239 of following nominal bore with all fittings and specials of heavy duty as required including cutting the walls, floors trenching & reffilling as required, making them good, claimping on wall of approved quality claimps as per specifications, testing the line etc. complete as per drawings, specifications and direction of engineer.
27	Providing and fixing 25 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with 150mm dia approved quality plastic floats with complete accessories as per specification and direction of EIC.
28	Providing and fixing in position 25mm dia nominal bore heavy duty gun metal wheel valve screw down type confirming to IS: 778 latest revision of approved make including the cost of all jointing materials, fittings and testing etc. complete as per specifications and direction of EIC.
29	Providing and fixing in position 32mm dia nominal boreheavy duty gun metal wheel valve screw down type confirming to IS: 778 latest revision of approved make including the cost of all jointing materials, fittings and testing etc. complete as per specifications and direction of EIC.
30	Providing and laying 300mm dia. non-pressure NP2 class (light duty) R.C. hume pipesjointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete as per drawings, specifications and as directed of the EIC.
31	Providing and fixing cut edge mirror 6mm thick of overall size600X450mm especially fabricated with superior glass (of approved quality) with designer acrylic PVC frame of approved colour and make mounted around with 6mm thick non-water absorbent Acrylic/PVC material backing fixed with cleats, all complete as per drawing,specifications and directions of the EIC.
32	Providing and laying M-35 grade and 80mm thick factory made coloured precast cement concreteinterlocking pavers block confirming to IS 15658 : 2006 made by block making machine with strong vibratory compaction and of approved colour, size and shape pattern laid in required slope over and including 50mm thick compacted bed of fine sand, filling the joints with fine sand etc. all complete as per drawing, specification & direction of Engineer–in charge.
33	Providing & Fixing of approved quality C.P. brass bib cock 15 mm dia of weighing not less than 400 gmas per direction of EIC.
34	Providing & Fixing of approved quality C.P. brass stop cock 15 mm dia of weighting not less than 400 gm.
35	Providing & Fixing of Water proof plywood 18 mm thick ISI marked.
36	Providing & Fixing of Water proof plywood 12 mm thick ISI marked.
37	Providing & Fixing white vitreous china Orissa pattern water closet (OP 23) (open ring) of H&R Johnson / Orissa C0117 of Paryware / Orissa COVYS 3010104 of Cera as approved quality .
38	Providing & Fixing of approved qualityEuropean type white glazed vitreous china ware water closet concealed S trap of \"H&R JOHNSON\" (Ruby concealed trap EWC P0448PW/\"PARRYWARE\"(NIAGARA C0252(S) /\"CERA\" (CIGNIA Concealed S1051108 S trap) as approved.
39	Replacing the existing WC and providing & fixing New Anglo Indian WC of make \"HINDWARE\" or \"parry\", Cerra as approved by EIC and depositing the old WC is store as per direction of Engineer In Charge .
40	Providing & Fixing of approved C.P.brass pillar cock 15 mm dia. of weighting not less than 600 gm. (IS-1795 - 1982).
41	Providing & Fixing MS Wire Nails as Directed by the Engineer-in-Charge.
42	Providing & Fixing of S.S. wire mesh 0.63 mm dia with 12 mesh per 2.5 cm in eitheras Directed by the Engineer-in-Charge.
43	Providing & Fixing of approved quality Heavy Duty C.P. brass brackets for Towel rod as Directed by the Engineer-in-Charge.
44	Removal of exiting roofing and Supply & Fixing of Gal Valume sheeting over truss, Color complying to ASTM A792, base metal thickness 0.63mm, alloy coating AZ 150 (Aluminium 55%, Zin 43.50% and Silicon 1.5%),Yield Strength: 350 MPA, Paint coating regular modified polyster top coat 25 microns & bottom coat 12 microns epoxy, top color: Combination of Blue and Off White and bottom color grey. The Steel Sheet shall be 3\"-0\" (914mm) width which shall be curved and moulded at site using mechanical press and dies to the desired shape to form 2\"-0\" (605mm) wide interlocking panels. These panels shall be erected in position and the joints are seamed with gasket etc. whenever is required. The installation should be done by mechanized system.(Mesurment to be paid actul area of sheet as per site. Over lap of sheet area not to be paid.)Note:- This item work can be executed upto 30 Metre Height from ground level. Bidder should quate their rate considering charges ofhydraulic lift, scaffolding etc.
45	Providing & Applying of (LUNKER MAKE) High speed Haxa blade (ISI marked)as Directed by the Engineer-in-Charge.
46	Providing & Fixing of 12mm thick Teakwood rib 25mm wide as Directed by the Engineer-in-Charge.
47	Providing & Fixing of 12mm thick Teakwood rib 40mm wide as Directed by the Engineer-in-Charge.
48	Providing & Applying of Concrete drill bit upto 6mm dia for drilling machine of approved brand or BOCSH OR HILTI MAKE as Directed by the Engineer-in-Charge.
49	Providing & Applying of Full size Concrete drill bit upto 12mm dia for drilling machine of approved brand or BOCSH OR HILTI MAKE as Directed by the Engineer-in-Charge.
50	Providing & Applying of Full size Concrete drill bit upto 16mm dia for drilling machine of approved brand or BOCSH OR HILTI MAKE as Directed by the Engineer-in-Charge.
51	Providing & Applying of Full size Concrete drill bit upto 20mm dia for drilling machine of approved brand or BOCSH OR HILTI MAKE as Directed by the Engineer-in-Charge.
52	Providing & Applying of Fevicol Pidilite (R) SH Brand (synthetic resin adhesive) in one kg pack as Directed by the Engineer-in-Charge.
53	Providing & Applying of M Seal Pidilite in one kg pack as Directed by the Engineer-in-Charge.
54	Providing & Fixing of C.I. grating for gully trapas Directed by the Engineer-in-Charge.
55	Providing & Fixing ofFlushing Cistern P.V.C. 10 litre capacity (low level) (White)as Directed by the Engineer-in-Charge.
56	Providing & Fixing of PVC waste pipe 1 inch dia 900mm long with 32mm PVC waste coupling for Kitchen Sink & Wash Basin with all fittings as Directed by the Engineer-in-Charge.
57	Providing & Fixing of Chromium plated (C.P.) urinal brass spreader fittings of approved make as Directed by the Engineer-in-Charge.
58	Providing & Stacking of ordinary portland cement of 43 grade (OPC -43) confirming to relevent IS code and deposited in civil maintenance store along with voucher. (Note - Test certificate of cement obtained from the manufacturer shall be submitted for a qty. more than 1.0 MT brought).
59	Providing & Stacking of white cement conforming to relevent IS code as Directed by the Engineer-in-Charge.
60	Providing & depositing of screened river sand suitable for concrete/ masonary/ plaster works as approved as Directed by the Engineer-in-Charge.
61	Providing & Spreading of good quality crusher aggregate 20mm down gauge as Directed by the Engineer-in-Charge.
62	Providing & Stacking of good quality bricks 230 x 115 x 75 mm size as approved as Directed by the Engineer-in-Charge.
63	Providing & Fixing of 32mm dia PVC flushing bend for low level cistern as Directed by the Engineer-in-Charge.
64	Providing & Fixing of Nickel plated M.S. wood screw 15mm long as Directed by the Engineer-in-Charge.
65	Providing & Fixing of Nickel plated M.S. wood screw 20mm long as Directed by the Engineer-in-Charge.
66	Providing & Fixing of Nickel plated M.S. wood screw 25mm long as Directed by the Engineer-in-Charge.
67	Providing & Fixing of Nickel plated M.S. wood screw 32mm long as Directed by the Engineer-in-Charge.
68	Providing & Fixing of Nickel plated M.S. wood screw 40mm long as Directed by the Engineer-in-Charge.
69	Providing & Fixingof Nickel plated M.S. wood screw 50mm long as Directed by the Engineer-in-Charge.
70	Providing & Fixing of Nickel plated M.S. wood screw 75mm long as Directed by the Engineer-in-Charge.
71	Providing & Fixing of approved quality of 6mm thick wired glass in required size as Directed by the Engineer-in-Charge.
72	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 20 mm to 15 mm dia Reducer TEE as Directed by the Engineer-in-Charge.
73	Providing & Fixing of approved quality GI fittings of medium duty ISI marked 40 mm to 15 mm dia Reducer TEE as Directed by the Engineer-in-Charge.
74	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 25 mm to 15 mm dia Reducer TEE as Directed by the Engineer-in-Charge.
75	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 25 mm to 20 mm dia Reducer TEE as Directed by the Engineer-in-Charge.
76	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 32 mm to 15 mm dia Reducer TEE as Directed by the Engineer-in-Charge.
77	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 32 mm to 20 mm dia Reducer TEE as Directed by the Engineer-in-Charge.
78	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 32 mm to 25 mm dia Reducer TEE as Directed by the Engineer-in-Charge.
79	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 40 mm to 20 mm dia Reducer TEE as Directed by the Engineer-in-Charge.
80	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 40 mm to 32 mm dia Reducer TEE as Directed by the Engineer-in-Charge.
81	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 40 mm to 25 mm dia Reducer TEE as Directed by the Engineer-in-Charge.
82	Providing & Fixing of approved quality G.I. Tee 15 mm. dia Heavy duty as Directed by the Engineer-in-Charge.
83	Providing & Fixing of approved quality G.I. Tee 20 mm.dia. Heavy duty as Directed by the Engineer-in-Charge.
84	Providing & Fixing of approved quality G.I. Tee 25 mm.dia. Heavy duty as Directed by the Engineer-in-Charge.
85	Providing & Fixing of approved quality G.I. Tee 32 mm. dia Heavy duty as Directed by the Engineer-in-Charge.
86	Providing & Fixing of approved quality G.I. Tee 40 mm. dia Heavy dutyas Directed by the Engineer-in-Charge.
87	Providing & Fixing of approved quality G.I. Tee 50 mm.dia. Heavy duty as Directed by the Engineer-in-Charge.
88	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete : 15 mm nominal bore.
89	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete : 20 mm nominal bore.
90	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete : 25 mm nominal bore.
91	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete : 32 mm nominal bore.
92	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete : 40 mm nominal bore.
93	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete : 50 mm nominal bore.
94	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 20 mm to 15 mm dia reducer Elbow as Directed by the Engineer-in-Charge.
95	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 25 mm to 15 mm dia Reducer Elbow as Directed by the Engineer-in-Charge.
96	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 25 mm to 20 mm dia reducer Elbow as Directed by the Engineer-in-Charge.
97	Providing & Fixing of approved quality GI fittings of Heavy duty ISI mark 32 mm to 15 mm dia Reducer ELBOW as Directed by the Engineer-in-Charge.
98	Providing & Fixing of approved quality GI fittings of Heavy duty ISI mark 32 mm to 20 mm dia Reducer ELBOW as Directed by the Engineer-in-Charge.
99	Providing & Fixing of approved quality GI fittings of Heavy duty ISI mark 32 mm to 25 mm dia Reducer ELBOW as Directed by the Engineer-in-Charge.
100	Providing & Fixing of approved quality GI fittings of Heavy duty ISI mark 40mm to 15 mm dia Reducer ELBOW as Directed by the Engineer-in-Charge.
101	Providing & Fixing of approved quality GI fittings of Heavy duty ISI mark 40mm to 20 mm dia Reducer ELBOW as Directed by the Engineer-in-Charge.
102	Providing & Fixing of approved quality GI fittings of Heavy duty ISI mark 40mm to 25 mm dia Reducer ELBOW as Directed by the Engineer-in-Charge.
103	Providing & Fixing of approved quality GI fittings of Heavy duty ISI mark 40mm to 32mm dia Reducer ELBOW as Directed by the Engineer-in-Charge.
104	Providing & Fixing of approved quality G.I. elbow 15 mm. dia. Heavy duty as Directed by the Engineer-in-Charge.
105	Providing & Fixing of approved quality G.I. elbow 20 MM dia. Heavy duty as Directed by the Engineer-in-Charge.
106	Providing & Fixing of approved quality G.I. elbow 25 MM dia. Heavy duty as Directed by the Engineer-in-Charge.
107	Providing & Fixing of approved quality G.I. elbow 32 mm. dia. Heavy duty as Directed by the Engineer-in-Charge.
108	Providing & Fixing of approved quality G.I. elbow 40 mm. dia. Heavy duty as Directed by the Engineer-in-Charge.
109	Providing & Fixing of approved quality G.I. elbow 50 mm. dia. Heavy duty as Directed by the Engineer-in-Charge.
110	Providing & Fixing of approved quality G.I. nipple 15 mm dia of 50 mm long as Directed by the Engineer-in-Charge.
111	Providing & Fixing approved quality G.I. nipple 15 mm dia of 100 mm longas Directed by the Engineer-in-Charge.
112	Providing & Fixing of approved quality G.I. nipple 15 mm dia of 150 mm longas Directed by the Engineer-in-Charge.
113	Providing & Fixing of approved quality G.I. nipple 20 mm dia of 50 mm long as Directed by the Engineer-in-Charge.
114	Providing & Fixing of approved quality G.I. nipple 20 mm dia of 100 mm long as Directed by the Engineer-in-Charge.
115	Providing & Fixing of approved quality G.I. nipple 20 mm dia of 150 mm long as Directed by the Engineer-in-Charge.
116	Providing & Fixing of approved quality G.I. nipple 25 mm dia of 50 mm long as Directed by the Engineer-in-Charge.
117	Providing & Fixing of approved quality G.I. nipple 25 mm dia of 100 mm long as Directed by the Engineer-in-Charge.
118	Providing & Fixing of approved quality G.I. nipple 25 mm dia of 150 mm long as Directed by the Engineer-in-Charge.
119	Providing & Fixing of approved quality G.I. nipple 32 mm dia of 50 mm long as Directed by the Engineer-in-Charge.
120	Providing & Fixing of approved quality G.I. nipple 32 mm dia. 100 mm long as Directed by the Engineer-in-Charge.
121	Providing & Fixing of approved quality G.I. nipple 32 mm dia of 150 mm long as Directed by the Engineer-in-Charge.
122	Providing & Fixing of approved quality G.I. nipple 40 mm dia of 50 mm long as Directed by the Engineer-in-Charge.
123	Providing & Fixing of approved quality G.I. nipple 40 mm dia of 100 mm long as Directed by the Engineer-in-Charge.
124	Providing & Fixing of approved quality G.I. nipple 40 mm dia of 150 mm long as Directed by the Engineer-in-Charge.
125	Providing & Fixing of approved quality G.I. nipple 50 mm dia of 50 mm long as Directed by the Engineer-in-Charge.
126	Providing & Fixing of approved quality G.I. nipple 50 mm dia of 100 mm long as Directed by the Engineer-in-Charge.
127	Providing & Fixing of approved quality G.I. nipple 50 mm dia of 150 mm long as Directed by the Engineer-in-Charge.
128	Providing & Fixing of approved quality G.I. plug 15 mm. dia. Heavy duty as Directed by the Engineer-in-Charge.
129	Providing & Fixing of approved quality G.I. plug 20 mm. dia. Heavy duty as Directed by the Engineer-in-Charge.
130	Providing & Fixing of approved quality G.I. plug 25 mm. dia. B- class as Directed by the Engineer-in-Charge.
131	Providing & Fixing of approved quality G.I. plug 32 mm. dia. B- class as Directed by the Engineer-in-Charge.
132	Providing & Fixing of approved quality G.I. plug 40 mm. dia. B- class as Directed by the Engineer-in-Charge.
133	Providing & Fixing of approved quality G.I. plug 50 mm. dia. Heavy duty as Directed by the Engineer-in-Charge.
134	Providing & Fixing of approved quality G.I. holder clamp 15 mm. dia. Heavy duty as Directed by the Engineer-in-Charge.
135	Providing & Fixing of approved quality G.I. holder clamp 20 MM. dia. Heavy duty as Directed by the Engineer-in-Charge.
136	Providing & Fixing of approved quality G.I. holder clamp 25 MM. dia. Heavy dutyas Directed by the Engineer-in-Charge.
137	Providing & Fixing of approved quality G.I. holder clamp 32 MM. dia. Heavy dutyas Directed by the Engineer-in-Charge.
138	Providing & Fixing of approved quality G.I. holder clamp 40 MM. dia. Heavy duty as Directed by the Engineer-in-Charge.
139	Providing & Fixing of approved quality G.I. holder clamp 50 MM. dia. Heavy duty as Directed by the Engineer-in-Charge.
140	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 20 mm to 15 mm dia reducer socket as Directed by the Engineer-in-Charge.
141	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 25 mm to 15 mm dia reducer socket as Directed by the Engineer-in-Charge.
142	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 25 mm to 20 mm dia reducer socket as Directed by the Engineer-in-Charge.
143	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 32 mm to 15 mm dia reducer socket as Directed by the Engineer-in-Charge.
144	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 32 mm to 20 mm dia reducer socket as Directed by the Engineer-in-Charge.
145	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 32 mm to 25 mm dia reducer socket as Directed by the Engineer-in-Charge.
146	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 40mm to 15 mm dia reducer socket as Directed by the Engineer-in-Charge.
147	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 40mm to 20 mm dia reducer socket as Directed by the Engineer-in-Charge.
148	Providing & Fixing of approved quality GI fittings of Heavy duty ISI marked 40mm to 25 mm dia reducer socketas Directed by the Engineer-in-Charge.
149	Providing & Fixing of approved quality GI fittings of Heavy duty class ISI marked 15mm dia Socket (Ordinary/reducing type) as Directed by the Engineer-in-Charge.
150	Providing & Fixing of approved quality GI fittings of Heavy duty class ISI marked 20mm dia Socket (Ordinary/reducing type) as Directed by the Engineer-in-Charge.
151	Providing & Fixingof approved quality GI fittings of Heavy duty class ISI marked 25mm dia Socket (Ordinary/reducing type) as Directed by the Engineer-in-Charge.
152	Providing & Fixing of approved quality GI fittings of Heavy duty class ISI marked 32mm dia Socket (Ordinary/reducing type)as Directed by the Engineer-in-Charge.
153	Providing & Fixing of approved quality GI fittings of Heavy duty class ISI marked 40mm dia Socket (Ordinary/reducing type)as Directed by the Engineer-in-Charge.
154	Providing & Fixing of approved quality GI fittings of Heavy duty class ISI marked 40mm dia Socket (Ordinary/reducing type)as Directed by the Engineer-in-Charge.
155	Providing & Fixing of approved quality GI fittings of Heavy duty class ISI marked 15 mm dia Bend (Ordinary / reducing type) as Directed by the Engineer-in-Charge.
156	Providing & Fixing of approved quality GI fittings of Heavy duty class ISI marked 20 mm dia Bend(Ordinary / reducing type)as Directed by the Engineer-in-Charge.
157	Providing & Fixing of approved quality GI fittings of Heavy duty class ISI marked 25 mm dia Bend(Ordinary / reducing type) as Directed by the Engineer-in-Charge.
158	Providing & Fixing of approved quality GI fittings of Heavy duty class ISI marked 32 mm dia Bend(Ordinary / reducing type) as Directed by the Engineer-in-Charge.
159	Providing & Fixingof approved quality GI fittings of Heavy duty class ISI marked 40 mm dia Bend(Ordinary / reducing type) as Directed by the Engineer-in-Charge.
160	Providing & Fixing of approved quality GI fittings of Heavy duty class ISI marked 50 mm dia Bend(Ordinary / reducing type) as Directed by the Engineer-in-Charge.
161	Providing & Fixing of white glazed vitreous china ware WASH WASIN 510mm X 400mm of make \"H&R Johnson\" or \"PARRY\", CERA, as approved by EIC With one,two tap hole and one over flow hole antisplash as Directed by the Engineer-in-Charge.
162	Providing & Fixing of Taski Fresh & Clean Urinal Screen (1Unit) as Directed by the Engineer-in-Charge.
163	Providing & Fixingof approved quality Gun Metal MANIK/L & K Make Wheel Valve Screw down Type, Heavy Duty Conforming to IS-778: 15 mm dia.as Directed by the Engineer-in-Charge.
164	Providing & Fixingof approved quality Gun Metal MANIK/L & K Make Wheel Valve Screw down Type, Heavy Duty Conforming to IS-778: 20 mm dia.as Directed by the Engineer-in-Charge.
165	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 50mm nominal bore as Directed by the Engineer-in-Charge.
166	Providing & Fixing ofPVC connection pipe (PRAYAG MAKE) with brass unions : 30 cm length : 15 mm nominal bore as Directed by the Engineer-in-Charge.
167	Providing & Fixing PVC connection pipe (PRAYAG MAKE) with brass unions : 45 cm length : 15 mm nominal bore as Directed by the Engineer-in-Charge.
168	Providing & Fixing ofuplasticised PVC connection pipe (PRAYAG MAKE) with brass unions : 60 cm length : 15 mm nominal bore as Directed by the Engineer-in-Charge.
169	Providing & Fixing approved quality of M.S. Black (Shoes Nails) as directed by the Engineer and deposited in civil maintenance store.
170	Providing & Fixing of Heavy Duty C.P. Luxury Health Forcet with all Fittings as Directed by the Engineer-in-Charge.
171	Providing & Fixing of Silicon as Directed by the Engineer-in-Charge.
172	Providing & Applying ofEMERY PAPER/SAND PAPER of following sizes 60 no as Directed by the Engineer-in-Charge.
173	Providing & Applying ofEMERY PAPER/SAND PAPER of following sizes 80 no as Directed by the Engineer-in-Charge.
174	Providing & Fixing ofFORMICA/SUNMICA approved shade thickness as Directed by the Engineer-in-Charge.
175	Providing & Fixing of P.V.C. Syphon Set as Directed by the Engineer-in-Charge.
176	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quantity conforming to IS : 8931 : 15 mm nominal bore.
177	Providing & Fixing ofJet Spray for European W.C. as Directed by the Engineer-in-Charge.
178	Providing & Fixing ofP.V.C Bend 110 mm Dia for Rain Water Pipes as Directed by the Engineer-in-Charge.
179	Providing & FixingP.V.C. Toilet Seat Cover Heavy Duty HINDWARE/CERA/ PARRYWARE make for European WC as Directed by the Engineer-in-Charge.
180	Providing & Fixing ofP.V.C. Toilet Seat Cover Heavy Duty HINDWARE/CERA/ PARRYWARE make for ANGLO INDIAN WC as Directed by the Engineer-in-Charge.
181	Providing & Fixing ofNon Breakable P.V.C. Nylon Sleeves: 25 mm Longas Directed by the Engineer-in-Charge.
182	Providing & Fixing ofNon Breakable P.V.C. Nylon Sleeves: 35 mm Longas Directed by the Engineer-in-Charge.
183	Providing & Fixing ofNon Breakable P.V.C. Nylon Sleeves: 50 mm Longas Directed by the Engineer-in-Charge.
184	Providing & Fixing of approved brand 100 mm dia C.P. Grating as Directed by the Engineer-in-Charge.
185	Providing & Fixing of approved quality Heavy Duty Brass Float Valve 15 mm Dia as Directed by the Engineer-in-Charge.
186	Providing & Fixing of approved quality Heavy Duty Brass Float Valve 25 mm Dia as Directed by the Engineer-in-Charge.
187	Providing & Fixing of approved quality Heavy Duty Brass Float Valve 32 mm Dia. as Directed by the Engineer-in-Charge.
188	Providing & Fixing of approved quality C.P. Waste Coupling 25 mm Dia. as Directed by the Engineer-in-Charge.
189	Providing & Fixing of approved quality C.P. Waste Coupling 32mm Dia. as Directed by the Engineer-in-Charge.
190	Providing & Fixing of approved quality Brass Spindle Small size as Directed by the Engineer-in-Charge.
191	Providing & Fixing of approved quality Brass Spindle Medium size as Directed by the Engineer-in-Charge.
192	Providing & Fixing of approved quality Brass Spindle Big HEAVY size as Directed by the Engineer-in-Charge.
193	Providing & Fixing of Telescopic Pipe 1/4 dia for C.I. Flush Tank as Directed by the Engineer-in-Charge.
194	Providing & Fixing ofM.S. Nut Bolts etc. as Directed by the Engineer-in-Charge.
195	Providing & Applying ofLIME (WHITING) Code 1216as Directed by the Engineer-in-Charge.
196	Providing & Fixing ofHandle for Low Level Cisternas Directed by the Engineer-in-Charge.
197	Providing & Fixing ofRubber Bush Buffer 50 mm Long as Directed by the Engineer-in-Charge.
198	Providing & Applying ofPUTTY (Wood Work) as Directed by the Engineer-in-Charge.
199	Providing & Fixing ofSINTEX, VECTUS, PLASTO or equivalentWHITE, Four Layerinsulated antibacterialWATER TANK 500 Litre Capacity as Directed by the Engineer-in-Charge.(With check nut of 25mm – 20nos)
200	Providing and fixing 2.75mm thick 300x300mm tile flooring and / or 150mm high PVC tile skirting of `Armstrong\" make of required shade, repairing the broken wall edge, corners with cement/epoxy mortar, curing the same includingpreparation of base, laying floor / skirting tiles with appropriate adhesive, finishing the same complete as per direction of engineer.
201	Providing and fixing 30mm thick second class M.P. teak wood glazed shutters for windows / vantilators using 4 mm thick FLOAT glass panes including two coats of approved synthetic enamel paint over acoat of approved wood primer and also including bright finished ISI marked heavy duty M.S butt hinges with necessary screws and fixtures likeheavy duty Aluminium Tower bolt (size-200mm long), Handles (125mm long) etc: as per specification and directions of Engnieer-in-charge fabricating details of styles, rails, teakwood, beading shall be as per standard I.S. specificationNote - actual area of shutter will be paid.
202	Hiring of Buldozer on hourly basis including operator and fuel. (Time will be counted after entring into the plant)
203	Supplying and fixing in required slope 20 mm thick cement tiles (conforming to relevnant I.S) in 20 mm average thick cement sand mortar layer 1:4, admixed with water proofing compound as per manufacturer\"s specifications (Cico No.1 or equivalent conforming to relavent IS and as approved by engineer) laid over the existing roof surface after its thorough preparation through removal of loose layer, hacking and water washing followed by liberal spreading of neat cement slurry before laying cement mortar layer includinggrouting thetile joints withcementslurry allcomplete as per spesifications and directions of the engineer. Thewholeterrace sofinished shallbe floodedwith waterforminimumperiodof two week for curingand forfinaltest.
204	Providing & Fixing of P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. : Semi rigid pipe.: 32mm dia. as Directed by the Engineer-in-Charge.
205	Providing & Fixing of P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. : Flexible pipe: 40mm dia asDirected by the Engineer-in-Charge.
206	Providing & Fixing of Bottle Trap for wash basin and sink: PTMT Bottle trap 38/40 mm single piece moulded with height of 270 mm effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263gms.as Directed by the Engineer-in-Charge.
207	Providing & Fixing Chequered terrazzo tiles 22mm thick with graded marble chips of size up to 6mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1Cemnt:4 Coarse sand): Light shade using white cement including finishing & curing work at all level etc. complete as per direction of Engineer-in-charge.
208	Providing and fixing Polyviny Chloride sheet 3 MM thickness / P.V.C. Tile (of other woven fabric flooring / using rubber base adhesives including rolling with light wooden roller complete (3.0 mm thick sheet) as per specification & direction of EIC.
209	Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50 x 50mm made of G.I. wire of dia 4mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer – In charge.
210	Providing and wood work in frames of doors, window, clerestory windows and other frames, wrought frame and fixed in position: Kiln seasoned and chemically treated Hollock wood complete as per drawings, specifications and direction of Engineer.
211	Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
212	Providing & Fixing of Bright Finished Brass TOWER BOLTS (BARREL TYPE) with necessary screws etc., complete: 250 x 10 mm as Directed by the Engineer-in-Charge.
213	Providing & Fixing of Bright Finished Brass Hasp and Staple (Safety Type) with necessary screws etc., complete: 150 mm as Directed by the Engineer-in-Charge.
214	Providing & Fixing of Bright Finished Hasp and Staple (Safety Type) with necessary screws etc., complete: 115 mm as Directed by the Engineer-in-Charge.
215	Providing & Fixing of2nd class teak wood lipping/moulded beading or taj beading of size 18x5 mm fixed with wooden adhesive of approved quality and screws/ nalils on the edges of the pre-laminated particle board etc. complete as per drawings, specifications and directions of Engineer-in-charge.
216	Providing & Fixing of approved quality Float Valve P.V.C. BALLS Heavy Duty as Directed by the Engineer-in-Charge: 150 MM DIA
217	Providing & Fixing of approved quality Float Valve P.V.C. BALLS Heavy Duty as Directed by the Engineer-in-Charge: 250 MM DIA
218	Providing & Fixing of approved quality C.P. Bottel Trap Heavy Duty (Weight not less than 500 Grams) as Directed by the Engineer-in-Charge.
219	Providing & Fixing of approved quality URINAL (JHONSON PREMIUM COLLECTION/ PARRY WERE / HINDWARE) Dimensions:610 x 390 x390 mm TOPAZ HALF STALL URINAL IN WHITE COLOURas Directed by the Engineer-in-Charge.
220	Providing & Fixing of approved quality URINAL(JHONSON PREMIUM COLLECTION/ PARRY WERE / HINDWARE) Dimensions: 450 X 325 x 280 mm RUBY FLAT BLACK URINAL IN WHITE COLOUR as Directed by the Engineer-in-Charge.
221	Providing & Fixing of approved quality Brass SPREADERas Directed by the Engineer-in-Charge.
222	Providing & Fixing of approved quality Toilet Paper Holderas Directed by the Engineer-in-Charge.
223	Providing & Fixing of Tile Adhesive FEVI MATE XL for tile workas Directed by the Engineer-in-Charge.
224	Providing & Fixing of approved quality JET Spray with 1 metre Tube (PRAYAG BRAND Catalogue No 521or similar approved quality) as Directed by the Engineer-in-Charge.
225	Providing & Fixing of approved quality SHOE for Rain Water Pipes as Directed by the Engineer-in-Charge 110 MM DIA.
226	Providing & Fixing of approved quality COLLER for Rain Water Pipes as Directed by the Engineer-in-Charge: 110 MM DIA.
227	Providing and Fixing Self threaded Screw as Directed by the Engineer-in-Charge
228	Providing and Fixing Self PVC strip as Directed by the Engineer-in-Charge
229	Providing & Applying of ARALIDITE as Directed by the Engineer-in-Charge.
230	Providing & Fixing of approved quality Teflon Tape (1/2\") as Directed by the Engineer-in-Charge.
231	Providing & Fixing of PVC floor trap of self cleaning design 100mm inlet and 75 mm outlet with C.I. grating 100x100 mm as Directed by the Engineer-in-Charge.
232	Providing & Applying of Two Component Polysulphide base Sealing compound GUN GRADE for vertical surface as per BIS-12118, in 4 kg (Four) or morestandard pack as per specifications and direction of Engineer in charge.
233	Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.80 mm thick with Zinc coating not less than 275gm/m2.Note.:- This item work can be executed upto 30 Metre Height from ground level. Bidder should quate their rate considering charges ofhydraulic lift, scaffolding etc.
234	Providing & Fixing of Bright Finished Brass Butt Hinges with necessary screws etc., complete: 125 x 85 x 5.5 mm (Heavy Type) as Directed by the Engineer-in-Charge.
235	Providing & Fixing of Stainless steel kitchen sink 610 x 460 x 200 mm as Directed by the Engineer-in-Charge.
236	Supplying at site good quality garden earth free from weeds, roots, pebbles and other foreign materials including royalty and carriege (soil measured in trolly/stacks will be reduced by 20% for voids for payment purposes) as per specification and direction of EIC. (sample of garden good earth shall be approved by EIC before supplying)
237	Providing & Fixing C.P. brass shower rose with Shower arm 190mm long and wall flange of superior quality as Directed by the Engineer-in-Charge.
238	Providing & Applying of rapid setting cement based, water leak plugging mortar Renderoc Plug of Fosroc or Equivalent product of SIKA, BASF, CICO, in standard pack as per specifications and direction of Engineer in charge.
239	Providing and fixing of Cinch Anhor/ Anchor fastner, Screw headed/ sunken/Capstan headed bolts alongwith washer of following sizes as approved by the Engineer.M-8
240	Providing and fixing of Cinch Anhor/ Anchor fastner, Screw headed / sunken / Capstan headed bolts alongwith washer of following sizes as approved by the Engineer.M-10
241	Providing and fixing of Cinch Anhor/ Anchor fastner, Screw headed / sunken / Capstan headed bolts alongwith washer of following sizes as approved by the Engineer.M-12
242	Providing and fixing of Cinch Anhor/ Anchor fastner, Screw headed/sunken/Capstan headed bolts alongwith washer of following sizes as approved by the Engineer.M-16
243	Providing & Fixing of approved quality steel sink waste Coupling 25 mm Dia. as Directed by the Engineer-in-Charge.
244	Providing & Fixing of approved quality steel sink waste Coupling 32 mm Dia. as Directed by the Engineer-in-Charge.
245	Casting and lying M-20precast cover of maximum 20 mm size aggregate at all level, transporting of precast cover at site, laying, finishing, curing etc. all complete including cost of shuttering, as per direction of Engineer-in-charge. Aggregate should be as per IS-2386 and nominal mix should be made as per IS-456 i.e. 1:1.5:3 (cmenet:Fine Aggregate:Coarse Aggregate).On site quality test shouldbe performed on concrete (such that slump test, temperature etc.).On site quality of precast should be as per requirement of Engineer-in-charge.
246	Providing & Applying of ConbextraGP2 of fosroc or Equivalent product of SIKA, BASF, CICO, for non shrink grout in standard pack as per specifications and direction of Engineer in charge.
247	Structural steel work riveted, bolted or welded in built up sections, trusses and frame work M.S. door & fix ventilators, anchors etc made out M.S. angle, channels, flats, rods, bars, weld mesh, M.S. pipe etc including supplying, cutting, hoisting, fixing in position and applying two coat of approved quality synthetic enamel paint over a priming coat of approved steel primer all complete as per standard design, including the cost of all material and labour complete- as per drawings , specifications & direction of engineer in charge.
248	Providing form work of battened frame with sheathing having plywood lining / MS angle frame with sheathing of MS plate lining so as to give fair finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor not exceeding 3.5 meters to ceilings and removal of same for foundation, footings, columns, wall, Suspended floors, stairs, landings, balconies, lintels, beams, plinth beams, girders, cantilevers and access platform etc. complete at all level of floors / roof as per specifications and direction of Engineer in charge.
249	Accomplishing the task of Engineering Assistance works such as Supervision of various, Maintenance/Construction works, recording store entry, measurement etc. as specified in conditions of contract, complete on all working days on daily basis.Note: For executing one task day work under this item, daily deployment of Highly Skilled experienced personnels shall be required.
250	Extra work beyond normal duty hours to be carried out the same job as stated in 249
251	Accomplishing the task of Fitter/Plumber/carpenter/Mason etc. related works like cutting, bending, fixing and welding of metals as per desired pattern/drawing or repairing of existing buildings and structures, doors & windows and furniture and all other types of complaints received from offices at R.R. Site plant site with all required tools & plants but excluding welding machine and consumables which will be supplied by NPCIL, by engaging the minimum required Fitter/Plumber/Welder/carpenter/Mason etc. related works as specified in conditions of contract, complete on all working days on daily basis. Note: 1. For executing one task day work under this item, daily deployment of Skilled experienced personnels shall be required.
252	Extra work beyond normal duty hours to be carried out the same job as stated in 251
253	Accomplishing the task of movement of materials, assisting for Fitter/Plumber/Welder/ carpenter/Mason etc., on all working days on daily basis as specified in the conditions of contract. Note: For executing one task day work under this item, daily deployment of Un-Skilled experienced personnels shall be required.
254	Extra work beyond normal duty hours to be carried out the same job as stated in 253

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents

Also Visit

Tenders

Rajasthan Tenders

Construction Tenders

Turnkey Projects Tenders

Infrastructure Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Regular Civil Maintenance Works In Main Plant And Other Infrastructure Buildings At Rrs 5 And 6, Rawatbhata-Rajasthan

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Regular Civil Maintenance Works In Main Plant And Other Infrastructure Buildings At Rrs 5 And 6, Rawatbhata-Rajasthan

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us