Tender For Design, Fabrication, Supplying And Installation Of Workstations And Other Misc Civil Work In Thsti Building At Ncr Bsc Faridabad, Faridabad-Haryana
TDR : 53800611
Tender Notice
BOQ
19 Days Left
Faridabad
Haryana
Tender For Design, Fabrication, Supplying And Installation Of Workstations And Other Misc Civil Work In Thsti Building At Ncr Bsc Faridabad
Name of Work: Design, Fabrication, Supplying & Installation of Workstations & other Misc Civil Work in THSTI Building at NCR BSC Faridabad.
Sl. No.
Item Description
1
Fabricating, Supplying & Installation of Wooden Workstations Single Seats with gable end, center modesty panel, keyboard tray andmade up off 18mm thick Commercial ply. Exposed exterior surface of ply shall be finished with 1 mm thick laminate and interior surface with 0.8 mm thick laminate of approved colour and design. The unit shall have 01 nos pedastal with 03 drawer (size1\"-2\"LengthX1\"-6\" DepthX2\"-4\"Ht.) on the right side. The workstation shall have partitionon both side (24\"\"x18\"\") which would be fixed with bracket/other arrangement as per the drawing and specification/requirement. The center modesty panel (18\"height) shall be divided in two parts i.e white writing board and pin up board with fabric of required colour and shade. This includes all necessary fittings like suitable locking arrangement, screws, fasteners, hinges, adhesives, telescopic drawer channels, magnetic catchers, handles/ knobs and all other necessary fitting/ fixing arrangement etc. complete as per design, drawing and as directed by the Engineer-In-Charge.Size: (3\"-3\" x 2\"-0\" x 2\"-6\" Height),
2
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
3
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc.as per direction of Engineer-in-charge.10 x 120 mm
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
