|
| 1 | Taking down chowkhats or frames with shutters n.exc 1.5 sqm each (without taking off shutters from the frame) andall as directed. |
| 2 | Taking down chowkhats or frames with shutters exc 1.5 sqm but n.exc 4.00Sqm each (without taking off shutters from the frame) andall as directed. |
| 3 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings Complete all as specified and directed. |
| 4 | Taking down shutter of any description of area exceeding 1 sqm and n exc 2 sqm including builders hardware all as directed. |
| 5 | Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed. |
| 6 | M&L for brick works with bricks old sizestraight or curved on plain exc mean radius built in cement mortar 1:6 complete as directed. |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as Specified. |
| 8 | M&L Framed work as in such as grills gratings etc. with ends of bars shouldred and or rivited or forged into spikes guard bar, barried iron doors ladder framed balusters railing frame work for water tanks and similar works complete. |
| 9 | S&F in repairs Drappery curtain rods decorative type stainless steel 25mm nominal dia of approved quality including fixing oftwo number decorative brackets fixed in brick/concrete wall, Two number of latto on both ends of curtain rods complete all as specified and directed. |
| 10 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mmthick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified.Factory made single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 11 | Fceili |
| 12 | S&F Factory made Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid decorative type door/window/ ceosetory windows & other frames / chowkat of size 65mmx125mm compressing of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full boady threaded star headed SS screws having minimum density of 750 kg/cum and screwwithdrawal strength of 2200 N (Face) & 1100 N (Edge),minimum compressive strength 58 N/mm2, modulus ofelasticity 900 N/mm2 and resistance to spread of flameof Class A category with property of being termite/borerproof,water/ moisture proof and fire retardant and fixed in position with MS hold fast /Lugs/SS dash fastebers if required dia and length complete all as per direction of Engineer-in-Charge (MS holdfast /lugs or SS dash fasteners shall be paid separately) Note : for WPC solid door/window frames. minus 5mm tolerance in dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. |
| 13 | S&F 35mm thick, WPCglazed and skeleton shutters, open rebated and prepared to receive glass, gauze etcwith rails and styles including cut and mitered beards for securing wire cloth etc, complete all as specified and directed. |
| 14 | S & F powder coated Aluminium frame for doors, windows, ventilators with one or more rebates including joint cleat for fixing etc complete all as specified and directed. |
| 15 | S&FAnodised aluminium ith powder coating of any colour thickness of coating not less than 50 microns window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 16 | S&F factory made uPVC white colourThree track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 17 | S&F for factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casementhandles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately)Note:- For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 18 | S&F for factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single wiremesh proof pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casementhandles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (wire mesh shall be paid separately)Note:- For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 19 | S&Fstainlesssteel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples all as specified. |
| 20 | S&F SS butt hinges, 100 mm sizecomplete all as specified and directed. |
| 21 | S&F SS barrel tower bolt 150mm long extruded section all as specified. |
| 22 | S&F SS fancy handle 150mm long extruded section all as specified. |
| 23 | S&F 300mm long aluminium alloy anodised sliding bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts and extruded section or cast aluminium alloy and fixed complete. |
| 24 | S&F Sheet glass 4.8 mm thick, ordinary quality & glazing with oil putty in square 0.5 n. exc sqm in each pane completeall as specified and directed. |
| 25 | S&F Sheet glass 4.8 mm thick, ordinary quality & glazing with oil putty in square 0.5 sq.m in each pane completeall as specified and directed. |
| 26 | M&L for Granite (of any type) tiles 18 to 19mmthick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including screed bed 20mm thick in cemen tmortar 1:6complete all as specified and directed. |
| 27 | M&L for providing Mirror polished kota sotne slab flooring 20-22 mm thck over and including 15 mm thick screed in Cement morter1:6 and jointed with grey cement slurry mixed with pigment including cutting and mirror polishing incl demolition all as spd and directed |
| 28 | M&L for mirror polishedkota stone slab 20 to 22mmthick as in dado skirting over cement10mm thick backing coat in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed. |
| 29 | S&F in repairs 1200mm x 450mm x 5.0mm thick looking mirror bevelled edge of selected quality glass with aluminium frame of channel alround mounted onAC building board or commercial ply woodand fixed to wooden plug with CP brassscrews, complete all as specified and directed. |
| 30 | Roughning surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dirt complete all as specified |
| 31 | M & L 75 mm thick Cement concrete 1:3:6 (40mm graded aggregate)in flooring or plinth protection including surfaces to be finished even and smooth without using extra cement complete all as specified and directed. |
| 32 | S&F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified. |
| 33 | S&F Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified. |
| 34 | S&F steel work in tubler trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 all as specified and direcred. |
| 35 | Taking down of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ blankets any thickness, including cover fillets. complete all as specified. |
| 36 | M&L for PVC sheet covered one side gypsum board of size 600mmx600mmx12mm thick in ceiling fixed with screws complete all as specfied and directed |
| 37 | M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surroundingwall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate.channel with connecting clips across the intermediate channel at 457mm centre to centre. |
| 38 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 39 | Taking down cement or cement lime plaster on brick or stone walls/ etc including raking out joints, hacking for key, scrubing down with water complete all as specified and directed. |
| 40 | Material and labour for rendering 15mm thick on fair face of brick or concrete surfaces in CM 1:4 , finished even and fair without using extra cement and incl highly stretchable, durable and hydrophobic, Nanotechnology based Elastomeric Hydrophobic Powder/admixture (EHP) powder @ 1% of cement content complete all as specified and directed. Note : Elastomeric Hydrophobic Powder/admixture (EHP) shall be measured and paid as Supply only in respective item. |
| 41 | Material and labour for rendering 10mm thick on fair face of brick or concrete surfaces in CM 1:6 , finished even and fair without using extra cement and incl highly stretchable, durable and hydrophobic, Nanotechnology based Elastomeric Hydrophobic Powder/admixture (EHP) powder @ 1% of cement content complete all as specified and directed. Note : Elastomeric Hydrophobic Powder/admixture (EHP) shall be measured and paid as Supply only in respective item. |
| 42 | Material and labour for preparation of old/new plastered surfaces and applying Nanotechnology based Nano Putty is white cement based product with dispersible polymer and functional additives for application on interior rough plasters to give a smooth surface and will form base for paint finish for interiors of the building, applied in 02 coats of total thickness 1.5mm @ 1.2 kgs/sqm complete all as specified. |
| 43 | Material and labour for preparation of old/new plastered surfaces and applying two caots Nanotechnology based Nano Primer is white cement based product with dispersible polymer and functional additives for application on interior rough plasters to give a smooth surface and will form base for paint finish for interiors of the building, acomplete all as specified. |
| 44 | Material and Labour for 02 coats of Nanotechnology based Acrylic Regular Distemper, water based gives walls a smooth and matt finish and applied on prepared surface of wall & ceiling over a coat of approved nano primer @ 6.50 sqm/ltr using AUTO-ROLLER and AIR-LESS PAINT SPRAYER complete all as specified and dircted by Engr-in-Charge. |
| 45 | Supply only Nanotechnology based Elastomeric Hydrophobic Powder/admixture (EHP) powder for cement plaster and concrete. |
| 46 | M&L for preparation of newly plastered surfaces of any description and applying two coats of colour washover a coat of primer all as specified and directed. |
| 47 | M&L for preparation of new surfaces / old surfaces and applying two or more coats of100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 48 | M&L for Vitrified ceramic light shade textured coloured tiles 10 mm thick area of each tile not exceeding 0.36 sqmas in floors over 15mm thick screed bedin cement mortar 1:6 set and jointedin neat cement slurry and pointed in coloured cement. all as specified and directed |
| 49 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqmbut not exceeding 0.38 sqmas in floors over 15mm thick screed bedin cement mortar 1:6 set and jointedin neat cement slurry and pointed in coloured cement. all as specified and directed |
| 50 | M&Lglazed ceramic coloured tiles size 450X 300X 7mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick backing coat in CM (1:3) complete all as specified and directed. |
| 51 | S & F 10mm Thick Toughen glass partitions, Doors,including all fittings and fixtures, necessary Handles, hinges, and knobs etc as per the existing one complete all as specified and directed. |
| 52 | Surface Excavation average 15cm deep in soft/loose soil complete all as specified and directed |
| 53 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embaded in concrete, brick work masonry complete all as specified and directed. |
| 54 | M&L for Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft/ loose soil. |
| 55 | Grith of tree exc 30cm and not exceeding 100cm Grubbing up tree trunk including cutting of trunk portion protruding over ground, diggingout roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site complete all as specified and directed. |
| 56 | Plain Cement Concrete 1:4:8 Type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 57 | M&LRCC Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns,etc.; basement slabs, under-reamed piles and mass concrete uing type M-25(Design mix) (using 20mm graded) stone aggregate complete all as specified. |
| 58 | M&L formild steel TMT bars 10mm and over, cut to length, bent to shape required including cranking bending, spirally for hooping end and binding with and incl mild steel wire (annealed) not less than .9mm dia or securing with clips quality confirming Fe 410S or Fe-410O complete all as specified. |
| 59 | M&L formild steel TMT bars 5mm and over upto including 10mm diacut to length, bent to shape required including cranking bending, spirally for hooping end and binding with and incl mild steel wire (annealed) not less than .9mm dia or securing with clips quality confirming Fe 410S or Fe-410O as in stirrups complete all as specified. |
| 60 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified. |
| 61 | Returning and filling in and including spreading levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. |
| 62 | Removing Excavated soils exceeding 250 M but not exceeding 1.50 km and depositing where directed. |
| 63 | Plain Cement Concrete 1:2:4 Type B2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 64 | S&F Mild steel work in hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embedding in concrete and screwing etc., wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shapes as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 290 Gde E-165. |
| 65 | S&F Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc., as directed. |
| 66 | S&F 610mm dia razor concertina coil provided or any type fencing including necessary binding/welding complete all as specified. |
| 67 | Excavation in post holes (or similar holes) each n.exc 0.5 cum and getting out in soft/loose soil complete all as specified. |
| 68 | M&L PCC 1:3:6 type C2 (40mm graded aggregate) in foundations, filling and mass concrete all as specified and directed by engineer-in-charge. |
| 69 | Supply only chain link fencing MS galvanised wire of size 3mm and mesh size 50mm complete all as specified. |
| 70 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified. |
| 71 | S&F for Mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long. And dia of shunk 10mm complete all as specified and directed. |
| 72 | M&L for rendering 15 mm thickin cement mortor 1:4 on brick/ concrete surfaces finishing the surface even and fair without using extra cement complete all as specified directed. |
| 73 | M&L for Preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint over a coat of white cement primer includingpreparing surface of cement base even and smooth completeall as specified and directed. |
| 74 | M&L for preparation new plastered surfaces of any description and applying three coat of colour wash on wall surfaces complete all as specified and directed |
| 75 | M&L for providing WPC jallies 24mm thick incl fixing materials and frame work & taking down old RCC jallies complete all as specified and directed. |
| 76 | Taking down old unserviceable point wiring from existing conduit (light fan, socket or powder) complete such as switches, ceiling rose, pendent regulated and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc complete |
| 77 | Taking out Unserviceable main switch DB, MCB DB existing complete |
| 78 | Material & labour for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and factory made modular flush sheet galvanised metal sunken box having sheet thickness not less than 1.2 mm with zinc coating not less than 120 GSM with top, bottom, side and back wall knockouts for conduit entry from any direction, modular white cover plate with frame, blanking plate etc suitable forup to required module etc complete and making good to the disturbed surfaces to match the existing complete all as specified and directed for the following :- |
| 79 | One light point controlled by one, one way switch |
| 80 | One ceiling/ exhaust fan point controlled by one, one way switch |
| 81 | One socket outet point 5 amps on the independent board |
| 82 | One socket outet point 5 amps on the same board |
| 83 | All as per the description of Serial Item No 78 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed. |
| 84 | S&F modular switch, 06 Amps, single pole, one way, 230 volts, one module and IP 20 protection complete |
| 85 | S&F modular socket outlet 03 Pin, 06 Amps, 02 module with shutter complete |
| 86 | S&F modular switch, with indicator, 16 Amps, single pole, one way, 230 volts complete |
| 87 | S&F modular socket outlet 02 in 01, 03 pin,16 Amps, 02 module with shutter complete |
| 88 | S&F ceiling rose surface type bakelite 65x50mm three terminal complete |
| 89 | S&F modular ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, humfree, AC, 230 volts, socket type, 100 watts, ISI marked complete |
| 90 | S&F surface mounting LED integrated aluminium housing batten luminaire with PC diffuser 20 W, 4 feet fixture should have minimum efficiency at level >=120lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@240V AC, an operating voltage range of 140-270V and all accessories pre-wired including connecting up with copper conductor wire of suitable size with connector block complete. |
| 91 | S&F in repair LED Bulkhead luminaire 10 watt of polycarbonate housing and enclosed with acrylic diffuser IP-65 protection incl connection complete all as specified & directed |
| 92 | S& F in replacement LED Inverter type bldg security light fitting complete with mounting bracket made out of light grade GI pipe 40mm bore 1.20 mtr long bend to shape including 02 Nos of 40x5mm FI clamps with GI bolt, nut, washer and 3-core copper cable connection from ceiling rose to light fitting. Specification of light fitting are as under :-(a) System Power : 35 W(b) Housing : Pressure die cast aluminium alloy having separete optical & control gear compartment, top opening, polyster powder coated after phosphochromate treatment (c) Optics : Polycarbonate UV stabilised with integrated lens(d) Light source : SMD LED module mounted on MCPCB(e) Rated Voltage : 240V(f) Safe operating Voltage : 140V to 270V(g) Rated Frequecy : 50 Hz(h) Power Factor : ≥ 0.95(j) THD : ≤ 10(k) Operating Temp : - 10 deg C to + 50 deg C(l) Lumen Efficacy of LED : ≥ 140 Lm/W(m) System Luminous Efficacy :≥ 100 Lm/W(n) CCT : 5700K(o) Driver : Inbuilt SMPS based constant current type with protections for output open / short circuit , phase to phase, over voltage & surge voltage upto 10KV.(p) IP rating : 66(q) IK rating : 07(r)Battery (Li-Ion type, MinimumNominal Capcity:5200mAh, Minimum Backup: 02 Hrs) complete. |
| 93 | Material and labour for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed, including taking down old sub main wiring. Note : Two run for neutral and phase and one run for continuous earth wire shall be measured as one run for payment purpose) |
| 94 | M&L (in replacement) submain wiring with 2 run of 6 Sqmm (nominal area) FRLS PVC insulated, unsheathed and stranded copper conductor cable ISI marked drawn in to PVC conduit with and including independent 6 Sqmm (nominal area) FRLS PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB complete.(Note : Two run for neutral and phase and one run for continuous earth wire shall be measured as one run for payment purpose) |
| 95 | S&F(in replacement) sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing surface complete |
| 96 | S&F (in replacement) sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 415 volts, 04 ways with 200 Amps rated copper bus bar and metal double door suitable for MCCB 125 amps as incomer and MCB SP as outgoing along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete (Note :- MCCB & MCB SP will be measured seperately) |
| 97 | S&F (in replacement) MCB SP, AC, 240 volts of 10 to 32 Amps capacity \"B\" curve, 10 KA incl connections using copper lugs complete |
| 98 | S&F (in replacement) MCB, SPN, AC, 230 volts of 63 Amps capacity \"C\" curve, 10 KA breaking capacity and making connections by using copper lugs complete |
| 99 | S&F(in replacement)MCCB 125 amps, 4 Pole, 415 volt, AC, fixed type, with breaking capacity 16 KA suitable for load line/ VTPN DB & connection complete |
| 100 | M&L (in replacement) for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick directly buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to GI strip 25 x 4 mm by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 40 mm bore light grade for protection of earthing wire PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate, watering pipe 20mm bore light grade,funnel with wire mesh, 50 mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8 mm MS bars at 150 mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and including excavation & earth work & connecting the earthing point/equipment and testing complete |
| 101 | Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 230 volts of 20 Amps, \"C\" curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. |
| 102 | Supply, Installation, Testing and Commissioning (in replacement) of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 220 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose complete all as specified and directed |
