|
| 1 | Taking down ceiling fan/exhaust fan/ fresh air/ Wall mounted fan of any size/capacity from site as directed, inspection of all parts for assessing the serviceability and refixing the same after necessary repairs/replacement of unserviceable/ wornout part and testing as per entire satisfaction of Engr-in- Charge including making necessary electrical connections from ceiling rose to fan connectors complete all as specified and directed.Note : Spare parts shall be measured and paid seperately under relevent item as supply only. |
| 2 | Taking out unsv winding of ceiling fan and M&L for rewinding of ceiling fan 1200 mm 1400 mm sweep any make and type with super enamelled copper winding wire with existing gauge,wraping insulating material, insertion and varnishing well including drying complete and testing of the ceiling fan after refixing it to its original position upto entire satisfaction of Engr-in-Charge. |
| 3 | S&F in replacement ceiling fan blade suitable for 1200mm/1400 mm sweep of any make as per existing size complete all as specified and directed by Engineer-in-Charge. (As per sample) |
| 4 | S&F PVC canopy upper and lower of ceiling fan of any make & size complete with nuts, bolts & washers complete all as specified and directed by Engineer-in-Charge. |
| 5 | S&F in replacement ceiling fan down rod 0.6 mtr long duly made out of mild steel including rubber bush nut, bolt, washer and split pin complete all as specified and directed by Engineer-in-Charge. |
| 6 | S&F in replacement capacitor of1.0 MFD +5%,440V AC 50 Hz complete all as specified and directed by Engineer-in-Charge. |
| 7 | S&F in replacement capacitor 2.5 MFD 430V AC 50 Hzcomplete all as specified and directed by Engineer-in-Charge. |
| 8 | S&F in replacement capacitor 3.15 MFD complete all as specified and directed by Engineer-in-Charge. |
| 9 | S&F in replacement capacitor 4.0 MFD complete all as specified and directed by Engineer-in-Charge. |
| 10 | S&F in replacement onlyball bearing No. 6202 complete all as specified and directed by Engineer-in-Charge. |
| 11 | S&F in replacement onlyball bearing No. 6203 complete all as specified and directed by Engineer-in-Charge. |
| 12 | Taking out old unserviceable ceiling fan rotor and fixing the new rotor on ceiling fan of any sweep and make and making in good condition complete all as specified and directed by Engineer-in-Charge. |
| 13 | Taking out old unserviceable ceiling fan stator and fixing the new stator on ceiling fan of any sweep and make and making in good condition complete all as specified and directed by Engineer-in-Charge. |
| 14 | Taking out old unsv worn out shaft of existing ceiling fan any make, type or size and repair/replacement of same as per existing ceiling fan complete all as specified and directed by Engineer-in-Charge. |
| 15 | Taking out old unsv gun metal bush of any size and repair/replacement of same as sutiable for ceiling fans 1200/1400 mm complete all as specified and directed by Engineer-in-Charge. |
| 16 | S&F in replacement only spring of ceiling fan complete all as specified and directed by Engineer-in-Charge. |
| 17 | S&F in replacement only motor screw of ceiling fan complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F in replacement only rubber clamp of ceiling fan with nuts, bolts & washers and safety pin complete all as specified and directed by Engineer-in-Charge. |
| 19 | S&F in replacement onlycapacitor holding clamp of ceiling fan complete all as specified and directed by Engineer-in-Charge. |
| 20 | S&F in replacement onlyblade screw of ceiling fan complete all as specified and directed by Engineer-in-Charge. |
| 21 | M & L for painting of ceiling fans , in situ with synthetic enamel paint by spraying including filling cavities with filler, one or more coat to achieve even and smooth surface after cleaning all dustetc. complete all as specified and directed by Engineer-in-Charge. |
| 22 | Supply and fixing ceiling fans complete with remote, blade, down rods, with accessories, rated speed not less than 330 RPM, 230 V,1200 mm sweep, air delivery not less than 220 CMM,BEE five star rated voltage range 140-280 volts with brushess direct current motor (BLDC) against conversion including making necessary electrical connection with and including three core copper multistanded cable of size 1.5 sqmm all as specified and directed by Engr-in-Charge. Make :Halonix/Gold star/Orient/Crompton |
| 23 | S&F in replacement exhaust fan metal blade suitable for 225/300mm sweep of any make (as per sample) with suitable size of split pin complete all as specified and directed by Edngineer-in-Charge. |
| 24 | Taking out old unserviceable exhaust fan stator and fixing the new stator on exhaust fan of any sweep and make and making in good condition complete all as specified and directed by Engineer-in-Charge. |
| 25 | Taking out old unserviceable exhaust fan rotor and fixing the new rotor of exhaust fan of any sweep and make and making in good condition complete all as specified and directed by Engineer-in-Charge. |
| 26 | Taking out old unsv worn out shaft of existing exhaust fan any make, type or size and repair/replacement of same as per existing exhaust fan complete all as specified and directed by Engineer-in-Charge. |
| 27 | Taking out old unsv gun metal bush of any size and repair/replacement of same as sutiable for Exhaust fanscomplete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F in replacement onlyball bearing of exhaust fan complete all as specified and directed by Engineer-in-Charge. |
| 29 | S&F in replacement only motor screw of exhaust fan complete all as specified and directed by Engineer-in-Charge. |
| 30 | S&F in replacement only exhaust fan motor housing body parts of any make and size complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F in replacement of body frame for holding exhaust fan motor and grill parts of any make and size complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F in replacement only exhaust fan grill of existing of any make and size complete all as specified and directed by Engineer-in-Charge. |
| 33 | S&F in replacement only rubber pad for suspenion of exhaust fan complete all as specified and directed by Engineer-in-Charge. |
| 34 | M & L for painting of exhaust fans complete, in situ with synthetic enemel paint by spraying including filling cavities with filler, one coat after cleaning all dustetc complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F inreplacement PVC cable copperconductormulti strandrad flexible 23/.0076 twin core and making connections from ceiling rose to fan complete all as specified and directed by Engineer-in-Charge. |
| 36 | Taking out unsv motor and repair/replacement of fresh air fan motor of suitable capacity as required at site (as per sample) 230 volts, 50 Hz, AC supply suitable for 300/250/200 mm size Fresh air fan as per sample complete all as specified and directed by Engineer-in-Charge. |
| 37 | Taking out old unsv PVC blade of existing ventilation fan any make, type or size and repair/replacement of same as per existing ventilation fan complete all as specified and directed by Engineer-in-Charge. |
| 38 | Supply and fixing ventilating fan made of sturdy engineering plastic non metallic resin body complete withlouver, shutter 250 mm sweep, 1250 RPM, single phase 240 volts AC 50 Hzand connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as directed by Engineer-in-Charge. |
| 39 | Taking out old unsv winding of wall fan 400 mm sweep any make and type and rewinding with super enamelled copper winding wire,wraping insulating material, insertion and varnishing well including drying complete and testing of the wll fan after refixing in position to the entire satisfaction of Engr-in-Charge. |
| 40 | Taking out old unsv PVC blade of wall fan and S&F inreplacement of PVC blade of wall fan suitable for 400mm sweep of any make (as per sample) with suitable size of split pin complete all as specified and directed by Edngineer-in-Charge. |
| 41 | Taking out old unserviceable wall fan stator and fixing the new stator on wall fan of any sweep complete all as specified and directed by Engineer-in-Charge. |
| 42 | Taking out old unserviceable wall fan rotor and fixing the new rotor suitable for 400mm sweep wall fan of any make/model complete all as specified and directed by Engineer-in-Charge. |
| 43 | Taking out old unsv worn out shaft of existing wall fan any make, type or size and repair/replacement of same suitable for 400mm sweep wall fan of any make/model complete all as specified and directed by Engineer-in-Charge. |
| 44 | S&F in replacement onlyball bearing of wall fan motor complete all as specified and directed by Engineer-in-Charge. |
| 45 | S&F in replacement of rear grill with motor holding frame of wall fan of any make and size complete all as specified and directed by Engineer-in-Charge. |
| 46 | S&F in replacement front grill of existing wall fan of any make and size complete all as specified and directed by Engineer-in-Charge. |
| 47 | S&F in replacement Rotary knob of wall fan complete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F in replacement Pull cord (speed control) of wall fan complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F in replacement plastic nut for fixing rear grill of wall fan complete all as specified and directed by Engineer-in-Charge. |
| 50 | S&F in replacement 12\"\" fan Spinner for fixing/holding fan blade of wall fan complete all as specified and directed by Engineer-in-Charge. |
| 51 | S&F in replacement mounting plate with screw for holding of wall fan in wall complete all as specified and directed by Engineer-in-Charge. |
| 52 | M & L for painting of wall fans Grillcomplete, in situ with synthetic enemel paint by spraying including filling cavities with filler, one coat after cleaning all dustetc complete all as specified and directed by Engineer-in-Charge. |
| 53 | Note: Fixing of nuts, bolts and washers as required at site for assembling the any type/make of fans shall be the resposibility of contractor and nothing shall be measured and paid extra for the same. |
| 54 | Taking out unsv winding of exhaust fan and M&L for rewinding of exhaust fan 225/300 mm sweep any make and typewith super enamelled copper winding wire of suitable size/gauge,wraping insulating material,varnishing well including drying complete and testing of the exhaust fan after refixing it to its original position upto entire satisfaction of Engr-in-Charge. |
| 55 | Taking down care fully copper/aluminium point wiring from wooden batten or conduits (light, fan, socket or power) complete incl fittings such as switches, sockets, ceiling roses, pendents, regulators, light fittings any type etc to be measured seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer in charge. |
| 56 | M & L for Point wiring complete with 1.5 sqmm single core PVC unsheathed insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through non-metalic rigid PVC conduit medium grade ISI Marked not less than 20 mm dia including all conduit accessories concealed in wall/ceiling/fixed to roof/truss/columns etc by cutting chases and including provision of 1.5 sqmm PVC unsheathedinsulated copper cable FRLS as earth continuIty conductor and connected to earth dolly including branded metal flush box/M S steel terminal boxes duly make embossed on it including provision of modular inner and outer cover plates with laminated top sheet cover for housing switches,socket out let and fan regulators etc concealed in wall and making good of disturbed surfaces including plastering with cement morttar and painting/whitte washing to match the existing shade of distemper/OBD or plastic emulsuion paint as required at site all as specified and as directed for the followings:- |
| 57 | One light/fan/exhaust fan point controlled by one,oneway switch including making necessary electrical connections. |
| 58 | One bell/buzzer point controlled by one bell push. |
| 59 | One light point controlled by two Nos two way switches. |
| 60 | One 3 pin 5 Amps socket outlet point controlled by oneway switch on independent board. |
| 61 | One 3 pin 5 Amps socket outlet point controlled by oneway switch on same board |
| 62 | All as per item No 55 but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board complete. |
| 63 | All as per item No 55 but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 4 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by Engineer in charge |
| 64 | Supply & fixing in replacement of white cover plate with frame 1 module/ 2 module complete all as specified and directed by Engineer in charge. |
| 65 | Supply & fixing in replacement of white cover plate with frame 3/4 module complete all as specified and directed by Engineer in charge. |
| 66 | Supply & fixing in replacement of white cover plate with frame 6 module complete all as specified and directed by Engineer in charge. |
| 67 | Supply & fixing in replacement of white cover plate with frame 8 module complete all as specified and directed by Engineer in charge. |
| 68 | S & F in replacement switch Modular type 6 Amps 1 Way,1 module, 230V AC complete including making necessary electrical connections all as specified and directed. |
| 69 | S & F in replacement Modular socket outlet 2/3 pin 6 Amp socket 2 module complete including making necessary electrical connections all as specified and directed. |
| 70 | S & F in replacement switch modular type 6amp SP two way, 1 module including making necessary electrical connections all as specified and directed. |
| 71 | S & F in replacement Modular Bell pushbutton SP with indicator 6 Amps, 1 module 230V AC complete including making necessary electrical connections all as specified and directed. |
| 72 | S & F in replacement switch Modular type 16 Amps 1Way, 1 module with modular plat, 230V AC complete including making necessary electrical connections all as specified and directed. |
| 73 | S & F in replacement Modular socket outlet 2/3 pin 6/16Amp universal socket 2 module complete including making necessary electrical connections all as specified and directed. |
| 74 | S & F in replacement modular stepped type electronic fanregulator 120W, 2 module complete including making necessary electrical connections all as specified and directed. |
| 75 | S & F in replacementSwitch piano flush button type single pole one way 6 Amps complete all as specified. |
| 76 | M&L switch piano flushbutton type single pole 16 Amps complete all as specified including making necessary electrical connections all as specified and directed. |
| 77 | S & F in replacement socket outlet, 2 in 1, 3 pin 6 and 16 Amp single pole complete all as specified. |
| 78 | S & F in replacement socket outlet6 Amp flush button type complete including making necessary electrical connections all as specified and directed. |
| 79 | S & F in replacement regulator electronic5 steps type suitable for 1200/1400 mm sweep 230 volts including making necessary electrical connections all as specified and directed. |
| 80 | S & F in replacement bell electric (ding dong) 230 volt, single pole complete all as specified and directed . |
| 81 | S & F in replacement insulated body, angle/batten holder with back plate complete including making necessary electrical connections all as specified and directed. |
| 82 | S & F in replacement ceiling rose surface PVC type with three terminals complete including making necessary electrical connections all as specified and directed. |
| 83 | S & F in replacementsheet metalenclosure, single pole and neutralwith a two pin and earth plug and socket 240 Volts grade complete with onesingle poleMCB \"C\" series 20 A capacity complete all as specified. Make : Indo Asian/Legrand/Havells |
| 84 | S & F LED batten luminaire surface mounted 4 feet, system wattage of 20 Watts, > 2000 systems lumen output with lifetime of 25000 burning hours, Power Factor > 0.9,colour temperature-6500K, surge protection 2.5KV in CM,meets LED IS specifications, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC andincluding connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed completeallas specified and directed. |
| 85 | S & F LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, > 1000 systems lumen outputwith lifetime of 25000 burning hours with, Power Factor > 0.9,colour temperature - 6500K, surge protection 2.5KV in CM,meets LED IS specifications, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC andincluding connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed completeallas specified and directed. |
| 86 | S & F LED 9/10 watts bulkhead fitting withnon yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 25,000 burning hours ,Power Factor >0.9, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, , Color Temperature-6000K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmmcopper conductor flexible wire fixed completeallas specified and directed. |
| 87 | S&F in replacement of decorative type wall mounted luminaire (Comet)with unbreakable poly carbonate materials suitable for 1x14 watt LED bulb B22 base complete all as specified and directed by Engineer in charge. |
| 88 | S & F surface ceiling mounted, LEDdown light fitting 12 watts , system efficacy at luminary level ≥ 70 Lumens/watt, 25000 burning hours, 6500K color temperature with , Power Factor > 0.90,with multi stage high voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmmcopper conductor flexible wire fixed completeallas specified and directed. . |
| 89 | S & F LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified. |
| 90 | S & F LED bulb 14 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified. |
| 91 | M&L for Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade, multistrandedcopper conductor cable with one run of 4 sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade, multistrandedcopper conductor cable as earth continuity conductor, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls all as specified and as directed. Note:- (1) Two runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as unit length.(2) The damaged surfaces to be made good with plastering will be carried out by contractor and cost of the same deem to be included in the quoted rates. Nothing extra in this account will be admissible. |
| 92 | M&L for Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade, multistrandedcopper conductor cable with one run of 6 sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade, multistrandedcopper conductor cable as earth continuity conductor, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls all as specified and as directed. Note:- (1) Two runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as unit length.(2) The damaged surfaces to be made good with plastering will be carried out by contractor and cost of the same deem to be included in the quoted rates. Nothing extra in this account will be admissible. |
| 93 | M&L for Sub main wiring complete with two runs of 10 Sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade, multistrandedcopper conductor cable with one run of 10 sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade, multistrandedcopper conductor cable as earth continuity conductor, drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls all as specified and as directed. Note:- (1) Two runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as unit length.(2) The damaged surfaces to be made good with plastering will be carried out by contractor and cost of the same deem to be included in the quoted rates. Nothing extra in this account will be admissible. |
| 94 | S&F factory made epoxy powder coated Distribution board (MCCB DB)VTPN 4 way vertical type, IP-43 Protection made out of minimum 1.6 mm thick CRCA sheet, fabricated, metal double door fixed to wall and suitable for universal mounting and including 200 Amps rated copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removeable gland plated with knockouts and including suitable MCCB 125/160 Amps 4 pole as incomer and 12 SP/6 DP or 04 Nos TPN MCBs of suitable rating as required at site complete all as specified and directed. |
| 95 | S & F MCB DB SPN 12 way Horizontal type, IP-43 Protection class, double door type, 240 V AC 50Hz suitable for mounting of MCBs,SPN as incomer and DP/SP MCBs as out goingswith tinned copper bus bar, neutral link and earth link complete all as specified. |
| 96 | S & F MCB DB SPN 8 way Horizontal type, IP-43 Protection class, double door type, 240 V AC 50Hz suitable for mounting of MCBs,SPN as incomer and DP/SP MCBs as out goingswith tinned copper bus bar, neutral link and earth link complete all as specified. |
| 97 | S&FMCB DB SPN 4 way Horizontal, IP-43 Protection double door 240 V AC 50Hz with for MCBSPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete. |
| 98 | S & F MCB DP 40 to 63 Amps 240 volts 10 KA 50 HZ \"B\" curve complete. |
| 99 | S & F MCB SP 6-32 Amps 240 volts 10 KA 50 HZ \"B\" curve complete. |
| 100 | Dismantling unserviceable burnt out MCCB by disconnecting the cable and Supply & Fix new MCCB\"s in the existing panel boards with new bolts, nuts,lugs & glands etc of the following capacities complete all as specified and directed :- |
| 101 | MCCB 100 Amps,4 pole 16KA, 440 Volts adjustable thermal setting confirming to IEC 60947-II, Ics=100% of Icu complete including making necessary electrical connections all as specified and directed. |
| 102 | MCCB 125 Amps,4 pole 16 KA, 440 Volts,adjustable thermal setting confirming to IEC 60947-II, Ics=100% of Icu complete including making necessary electrical connections all as specified and directed. |
| 103 | MCCB 160 Amps,4 pole 25 KA, 440 Volts,adjustable thermal setting confirming to IEC 60947-II, Ics=100% of Icu complete including making necessary electrical connections all as specified and directed. |
| 104 | S&F in replacement of Modular mini MCB 20 to 32 Amps 240 volts 3KA 50 HZ \"C\" curve complete including making electrical connections all as specified. |
| 105 | S & F PVC Gang box surface type heavy duty suitable for single switch & socket 5 Amps complete all as specified and directed by Engineer in charge . |
| 106 | S & F PVC Gang box surface type heavy duty suitable for two switch & two socket 5 Amps complete all as specified and directed by Engineer in charge . |
| 107 | S & F Gang box surface type heavy duty suitable for 15 Amps switch and socket complete all as specified and directed by Engineer in charge. |
| 108 | Disconnecting existing point wiring from defective/worn out casing and capping of any size and replacement with new casing capping of suitable size including all other accessories and fixing it on wall/ceiling/roof or other site as directed alongwith existing wire of point wiring of any description including fixing materials such as nails/screws and PVC gutties etc all as directed at site. |
| 109 | M&L for cleaning, servicing of electric chimney of any make/model at siteand repair/replacement of unsv any parts of the same as per site requirment complete all as specified and directed by Engineer-in-Charge. Note: Parts shall be measured and paid separately under relevent items. |
| 110 | Supply and fixing in replacement 3 speed copper motor of 250 watt with base plate and nuts suitable for wall mounted angular electric chimney of any make/model having suction power not less than 1200Cum/Hr, Al casette with stainless steel outer layer ,touch control panel etc, as per site requirement complete all as specified and as directed by Engr-in-Charge. |
| 111 | S&F in repair/replacement of elecronic mother board/PCB, existing sensor of existing electric chimney of any make/model all as specified and directed by Engineer-in-Charge. |
| 112 | Disconnecting / taking down water heaters (Geysers) of any make & capacity, horizontal or vertical type their existing locations, for carrying out overhauling / repairs from complete all as specified and directed. |
| 113 | Overhauling, repairing, reassembling, refixing, installation of water heaters/geysers to their original position, making all necessary water & electric connections and testing complete all as specified and directed.(Parts renewed shall be measured and aid separately under appropriate items). |
| 114 | S&F in replacement non return valve 15mm dia (ISI Marked) for Geysers of 50/35/25 Ltr capacity including GI Socket, Nipple, elbow ,bend etc and connecting up complete all as specified and directed by Engineer-in-Charge. |
| 115 | S&F in replacement for fixing in replacement safety pressurevalve (as per sample)for geysers complete all as directed by Engineer-in-charge. |
| 116 | S&F in replacement SS braided pipe of 12 mm (internal) suitable for hot/cold water, 600 mm long with brass nuts and rubber washers complete all as specified and directed by Engineer-in-Charge. |
| 117 | S&F in replacement heating element of 2/1.5 KW,(as per sample) with nut bolt washercomplete all as specified and directed by Engineer-in-Charge. |
| 118 | S&F in replacement of thermostat for 3/25/35/50 ltrs capacityof Instant/normal geysers complete all as specified and directed by Engineer-in-Charge. |
| 119 | S&F in replacementneonlamp/indicator lamp for geysers (red and green) complete all as specified and directed by Engineer-in-Charge. |
| 120 | S&F in replacement plug top, 3 pin, 20 amp earth metal clad (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 121 | S&F socket 3 pin 20 amp earth metal clad(ISImarked) complete all as specified and directed by Engineer-in-Charge. |
| 122 | S&F in replacementfastner 100mm long & 6mm dia long with suitable size of nut for fixing geyser/Exhaust Fan complete all as specified and directed by Engineer-in-Charge. |
| 123 | M&L for soldering and brazing inner copper tank 50/25/35 ltrs with brass solder and refixing complete (taking down and fixing shall be paid under item No 3above) complete all as specified and directed by Engineer-in-Charge. |
| 124 | S&F in repair & replacement base plate assembly (confirming to ISI ) complete for25/35 Ltrs capacity copper tankgeyser including inlet, outlet and thermostat pipe with drain plug and screws for fixing the element inclusiveofclamps for holding the elements with nut, bolts & air release valve suitable for any type/make of geysers installed at site complete all as specified and directed by Engineer-in-Charge. |
| 125 | S&F in repair & replacement inner Steel tank for geysers of capacity 25/35 ltr as per existing of approved make complete all as specified and directed by Engineer-in-Charge. |
| 126 | S&F in repair & replacement outer body/cover suitable for 25 ltr cap geyser made out of mild steel pre-treated and stove enamelled sheet of 18 SWG complete with top and bottom cover, rubber gasket, stead screw for fixing the top and bottom cover to outer body including two coat of white synthetic enamel paint over one coat of red oxide(spray painting) complete all as specified and directed by Engineer-in-Charge. |
| 127 | S&F in repair & replacement top cover for geysers (confirming to IS) suitable for any makes/capacity/type of geysers installed at site duly painted (spray) in two coats with enameled (Deco) paint of colour & shade complete all as specified and directed by Engineer-in-Charge. |
| 128 | S&F in repair & replacement bottom cover for geysers (Confirming to IS) suitable forany make/capacity/type of geysers installed at siteduly painted(spray)in two coats with enameled (Deco) paint of colour & shade as directed complete with inspectionplate in two pieces. |
| 129 | Supply and fix electric water heater vertical storage type of capacity 25 ltrs white coloured havinganti rust coating metal body with SS tank and heating element 2 KW, 5 star rated complete with all accessories such as safety valve, adjustable thermostat,auto cut off system, NRV, two Nos SS braided pipe of 12 mm (internal) heavy duty suitable for hot/cold water of suitable length as per OEM with brass nuts and rubber washers etc. and fastners (04 Nos) for mountting of geyser at suitable height and making necessary water connections from existing pipe line including all connected items required at site complete all as specified and directed. |
| 130 | S&F in replacementof electric panel hylem sheet size 12\"\"x8\"\" with suitable size of screw for fixing complete all as specified and directed by Engineer-in-Charge. |
| 131 | S&F PVC Gang box of any size forlight point/power point with suitable for switch ,socket ,regulator etc complete all as specified and directed by Engineer-in-Charge. |
| 132 | S &F in repair and replacement of electronic mother board / PCB of Existing BLDC ceiling fan of any make as per site requirment complete all as specified and directed by Engineer-in-Charge. |
| 133 | S&F in replacement of aluminium ducting hose of wall mounted angular electric chimney with existing size,(Min expanded length 12 feet) as per site required complete all as specified and as directed by Engr-in-Charge |
| 134 | Supply &fix LED Post top latern lights ,15W , single phase with decorative LED post top latern lights suitable for LED bulb luminaire with holder and fixed at GI pipe height not less than 0.4 mtr, painted the surface of GI pipeand provision of twin core flexible wire, copper conductor of 0.5 Sqmm from light fitting to loop in box complete including cement work, plastering etc as required for fixing/mounting of post top light complete all as specified and direcetd by Engineer-in-Charge. |
| 135 | M&L in replacement of PVC mesh of wall mounted angular electric chimneyof suitable size as per site required complete all as specified and as directed by Engr-in-Charge |
| 136 | Supply &fix garden/ bollard lights ,10W ,single phase with decorative Dome type suitable for LED bulb lights luminaire with holder andfixed at GI pipe height not less than 1.0 mtr, painted the surface of GI pipeand provision of twin core flexible wire, copper conductor of 0.5 Sqmm from light fitting to loop in box complete including making foundation for bollard light of size 250mmx250mmx400mm in cement mortar of suitable ratio and plastering & painting the surfaces of foundation complete all as specified.Note: height of foundation of light shall be made as per the direction of Engr-in-Charge and it should also be made minimum 0.30 mtr below ground level extra above of ground level foundation. |
| 137 | Supply and Fixing ofXLPE, insulated, armoured, heavy duty, electric cable with stranded aluminium conductors 2 Core x 6 Sq mm.1100 volts grade, laid in tranches/fixing on wall/poles or passing through pipe, including connecting up with suitable glands, lugs, nuts and bolts wherever required and testing on completion, including taking down existing unserviceable cable with GI protections pipes, complete all as specified and as directed by Engineer-in-Charge. |
| 138 | Excavation in trenches, notexceeding 1.5 m wide and notexceeding1.5 m in depth; for foundation, etc. notexceeding10 sqm on plan and notexceeding1.5m in depth and getting out in any type of soil complete as specified and as directed. |
| 139 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding25 cm in soil all as specified and directed. |
| 140 | Removing excavated materials (soil) not exc. 50m and depositing where directed at a level not exceeding1.5m above the starting point all as specified and directed. |
| 141 | Supply and Fixing ofHDPE double wall corrugated pipes conforming to IS-14930 Part-II with IP Protection of IP-67 having outer dia 50 mm and inner dia of 38 mm with necessary couplers, bends etc for protection of LT cable all as specified and directed. |
| 142 | M&L earthing complete with GIelectrode 600x 600 x 6mm, thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level (with top edge of earthplate not less than 1.50 mtr below normal ground level connected to GI strip 25x4 mm as earthing lead by means of bolt nuts, check nuts, and washers of brass connected including gun metal or phosphorus bronze of size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25 mm long hexagonal head screwed all as specified including excavation and earth work and disposal of surplus soil incl 40 mm GI tubing light grade and necessary fitting for protection of GI strip incl laying of alternate layer of charcoal dust and common salt PPC (1:2:3) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x 6mm MSangle iron frame for cover 40 mm thick (1:2:4) type B20 using 12.5 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm C/C both way with MS handle 20mm dia plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally PGL funnel with ground wire mesh 20mm dia GI pipe Medium grade for watering complete all as shown on electrical plate No 3 of SSR Part-1 2009 and connected in earth test incl testing completed all as specified and directed. Note:- Galvanised strip and protection light grade GI pipe upto 7.5 mtr shall be deemed to be in the rates. |
| 143 | M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recessed or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc of size 25X4 mm thick galvanised strip with duly fixedon suitable size of porcelain/ PVC insulator complete |
| 144 | M & L forin replacement onlysingle core PVC insulated cable 1.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits, all as specified and directed by Engr-in-Charge. |
| 145 | M & L forin replacement onlysingle core PVC insulated cable 2.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits, all as specified and directed by Engr-in-Charge. |
| 146 | Supply and fixing or connecting service cable 2 core 10 sqmm 1100 volts grade heavy duty flat or circular PVC insulated aluminum multistranded conductor served with inner sheathing of PVC and overall PVC sheathed on service connection complete all as specified and directed. |
| 147 | Supply and fixing or connecting service cable 2 core 6 sqmm 1100 volts grade heavy duty flat or circular PVC insulated aluminum multistranded conductor served with inner sheathing of PVC and overall PVC sheathed on service connection complete all as specified and directed. |
| 148 | S&F 35 W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover.System level efficacy of the Luminarie should more than 120 lm/W. The color temperature is around 6500 K with a color rendering index of 70.The luminaire is IP:65 protected.It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, High and low voltage protection along with a surge protection of 4 KV internal including provision of sutable dia GI light grade pipe1.2 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed. |
| 149 | S&F LED 2 X 2 ft backlite surface mounted fitting 36/40 Wattsnot less than 3600lm with Metallic CRCA powder coated body with high efficiency opal/PMMA diffuser with system efficacy > 100 lm/W, CRI>80, color temperature >5700k, IP 20, Power factor<0.9, THD<10%, 25000 burning hours ,Ambient temperature 0 to 50 Deg C, Driver should meet IEC complaint for safety, with voltage variation range of 150-270 V and surge protection of 2.5 KV including necessary fixing arrangementsfixed complete all as specified and directed. |
| 150 | Schedule of Credit |
