|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Dismantling stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortarts complete all as specified and directed. |
| 3 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 4 | Demolition of unreinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and disposed off from site complete all as specified and directed. |
| 5 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 6 | M&Lfor Pre-cast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed. |
| 7 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slabincluding rubbing and polishing complete over 20 mm thick cement screed bed in CM 1:6, complete all as specified and directed. |
| 8 | M&L for machine cut kota stone slab 20-25mm thick in skirting, risers of steps, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slabincluding rubbing and polishing complete over 15 mm thick cement plaster in CM (1:4) complete all as specified and directed. |
| 9 | M&L for 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in leveling course complete all as specified and directed. |
| 10 | M&L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 11 | M&L for non-skid ceramic coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thickscreed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 12 | All as per item No.11 above, but in vertical surfaces as in skirtings, incl backing coat 10 mm thick in CM 1:3complete all as specified and directed. |
| 13 | M&L for Virified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm(600x600mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 14 | All as per item No.13 above, but in vertical surfaces as in skirtings, incl backing coat 10 mm thick in CM 1:3 complete all as specified and directed. |
| 15 | M&L for glazed ceramic coloured joint free tiles in vertical surfaces 300x200x7mm/350 x 250 x 7mm/450x350x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement, incl backing coat of 10 mm thick in CM 1:3complete all as specified and directed. |
| 16 | M&L for glazed ceramic coloured joint free tiles in vertical surfaces 600x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement, incl backing coat of 10 mm thick in CM 1:3 complete all as specified and directed. |
| 17 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cement screed 15 mm thick in CM 1:4 complete all as specified and directed. |
| 18 | M&L for 18-20 mm thick white makrana marble work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble including cement screed 15 mm thick in CM 1:4 complete all as specified and directed. |
| 19 | M&L for green marble work 18 to 20mm thick(table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cement screed 15 mm thick in CM 1:4 complete all as specified and directed. |
| 20 | M&L for machine cut Jaisalmer stone golden colour of 16 to 18mm thick as in wall cladding, jambs, pillars, window-cills, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of stonee including cement screed 15 mm thick in CM 1:4 complete all as specified and directed. |
| 21 | S&F galvanised iron pipe of 15mm bore, medium grade with all fitting such as bends, elbows, tees, short pieces, connectors, back-nuts, diminishing pieces, caps, plugs and unions, etc; fixed to wall and ceilings or laid in floor including taking up or down steel tubing complete all as specified and directed. |
| 22 | S&F galvanised iron pipe of 20mm bore, medium grade with all fitting such as bends, elbows, tees, short pieces, connectors, back-nuts, diminishing pieces, caps, plugs and unions, etc; fixed to wall and ceilings or laid in floor including taking up or down steel tubing complete all as specified and directed. |
| 23 | S&F galvanised iron pipe of 25mm bore, medium grade with all fitting such as bends, elbows, tees, short pieces, connectors, back-nuts, diminishing pieces, caps, plugs and unions, etc; fixed to wall and ceilings or laid in floor including taking up or down steel tubing complete all as specified and directed. |
| 24 | S&F in repairs 16 mm bore of pipes 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceiling, or in floors etc complete all as specified and directed. |
| 25 | S&F in repairs 20 mm bore of pipes 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceiling, or in floors etc complete all as specified and directed. |
| 26 | S&F in repairs pillar taps 15mm bore cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered hot\" or \"cold\" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 27 | S&F 15mmBib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fixed in repairs complete all as specified and directed. |
| 28 | S&F in repairs stop valves, cast copper alloy , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, 15 mm bore dia pipe complete all as specified and directed. |
| 29 | S&F in repairs 15mm bore angle valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union complete all as specified and directed. |
| 30 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 31 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixing complete all as specified and directed. |
| 32 | S&F in repairs Chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 33 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) with plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device complete all as specified and directed. |
| 34 | S&F in repairs sinks made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 35 | S&F in repairs brass Chromium plated shower roses with or without swivel joints 125 mm size, including fixing to steel pipe or union complete all as specified and directed. |
| 36 | S&F in repairs vitreous china squatting pan orissa pattern size 580x440mm white with integral foot rest(excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed. |
| 37 | S&F in repairs PVC valveless, syphonic action typeflushing cistern low level, 10 litre capacity with it’s complete accessories, fixed complete incl connection to water pipe and PVC 32 mm dia flush pipe etc complete all as specified and directed. |
| 38 | S&F in repairs vitreous chinawash hand basin, white, flat back, size 550x400mm excluding taps but including brackets & CP waste coupling 32mm, LDPE waste pipe 32mm upto floor complete all as specifed and directed. |
| 39 | S&F in repairs PVC connection 15mm dia with PTMT nuts of length 450mm complete all as specified and directed. |
| 40 | S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device complete all as specified and directed. |
| 41 | S&F in repair Corner glass shelf assembly with and including bracket and glass consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete set etc complete all as specified and directed. |
| 42 | S&F in repairs 15mmBrass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 43 | S&F in repair brass chromium plated Swan neck fancy type pillar taps of 15 mm bore complete all as specified and directed. |
| 44 | S&F in repairs Jet spray for water closet pan pedestal pattern complete all as specified and directed. |
| 45 | S&F in repairs Self-closing pillar taps 15 mm bore, cast copper alloy, chromium plated, fancy type, screwed for iron pipe complete all as specified and directed. |
| 46 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, paving, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight, complete all as specified and directed. |
| 47 | M&L for PCC 1:2:4type B-1 ( using 20mm graded stone aggregate) 40mm thick as in floor finishing surfaces of conc topping even and smooth without using extra cement complete all as specified and directed. |
| 48 | Supply onlyglass dividing strips 3mm thick, 38 mm wide laid in position conforming to design pattern as approved complete all as specified and directed. |
| 49 | M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded agg) as in sub base complete all as specified and directed. |
| 50 | M&L chequered Cement concretetiles20 cmx20cmx 25 mm thick set, jointed and pointed neat cement slurry in floorwith grey cement and pigments, incl 20 mm thick screed bedin CM (1: 4) complete all as specified and directed. |
| 51 | M&L for sand filling under floorsincluding spearding and levelling in layers n exc.25 cm thick, watering and consolidation complete all as specified and directed. |
| 52 | M&L for machine pressed precast concrete interlockingpaver block any shape and size conforming toIS 15658-2006 of60mmthickness, M-35 Gradeof cement concrete with grey cementand pigmentcomplete all as specified and directed. |
| 53 | M&L for machine pressed precast concrete interlockingpaver block any shape and size conforming toIS 15658-2006 of80mmthickness, M-40 Gradeof cement concrete with grey cementand pigmentcomplete all as specified and directed. |
| 54 | M&L for Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and directed. |
| 55 | M&L for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and directed. |
| 56 | M & L for Cleaning and removing, all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity exc 250 Ltrs but not exc 500 Ltrs water storage tanks complete all as specified and directed. |
| 57 | S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe25 mm dia (minimum weight 455 gms) complete all as specified and directed. |
| 58 | S&Fin repairs 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 59 | Dismantling cast iron work of any description complete all as specified and as directed. |
| 60 | S&F 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. |
| 61 | S&F 75mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. |
| 62 | S&F 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified and directed. |
| 63 | S&F 75mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified and directed. |
| 64 | S&F 100mm bore bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed. |
| 65 | S&F 75mm bore bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed. |
| 66 | S&F 75mm bore cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 67 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measuredoverall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 68 | S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors/wall complete all as specified and directed. |
| 69 | S&F PVC (SWR) bend 110 mm bore complete all as specified and as directed. |
| 70 | S&F PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and directed. |
| 71 | S&F PVC (SWR) bends 75 mm bore complete all as specified and as directed. |
| 72 | S&F PVC (SWR) floor trap plain 75 mm dia outlet with grating including jointing with solvent cementcomplete all as specified and as directed. |
| 73 | S&F in repairs Stainless steel gratings 100mm bore size fixed with cement motar complete all as specified and directed. |
| 74 | S&F in repairs PVC Flexible waste pipe 32/40 mm dia with socket for SS Sink/WHB upto floor level and length not less than 0.60 M complete all as specified and directed. |
| 75 | S&F in repairs vitreous china urinal, half stall type, white excl flushing cistern, flush pipe and waste pipe but incl brackets and sprader fixed complete all as specified and directed. |
| 76 | S&F in repairs brass chromium plated kitchen sink waste coupling comprising of four parts CP brass kitchen sink strainer & basket, rubber gasket, PTMT locknut, PTMT strainer sleevewith 32mm outlet and checkof any dia as per site requirement complete all as specified and directed. |
| 77 | Demolition of unreinforced Concrete above ground floors for sunken portion and disposed off from site complete all as specified and directed. |
| 78 | M&L for water proofing treatment to RCC sunken slab as specified below and as directed by Engr-in-Charge:- (a) 15mm plaster in CM (1:3) with WPC on raised vertical surface. (b) Cleaning the surface with wire brush/coir brush, removing loose material like dust particles ,dirt etc. (c) Creating fillet covering of 50x50 mm with polymer modified mortar on the junction of slab and walls(d) Apply first coat of two component modified polymer coating on the horizontal and vertical surfaces. (e) Provision of glass fibre mesh of 2x2 mm immidiately on above coating (f) Apply second coat of two component modified polymer coating after 72 hours (g) Laying concrete (1:4:8) over the coating as per requirement (h) Joining the sanitary pipe with non shrink cementatiuos grout complete all as specified and directed. Note : (i) The Treatment shall be carried out as per the manufacturers instructions and as directed by Eng-in-Charge. (ii) The plan area of floor shall be consider for payment. |
| 79 | M&L rendering 10mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even & smooth w/o using extra cement complete all as specified and directed. |
| 80 | M&L for 15mm thick rendering in two layers of 10mm thick and 5mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even & smooth w/o using extra cement,using water proofing compound in top layer complete all as specified and as directed. Note : (WPC shall be measured and paid separately as \"Supply only\".) |
| 81 | M&L for rendering 5mm thick in CM 1:3 on fair faces of concrete surfaces as in ceiling and finished even and smooth with out using extra cement complete all as specified and as directed. |
| 82 | Supply only integral water proofing compoundof approved quality complete all as specified and directed. |
| 83 | M & L for Preparing of new plaster surfaces and applying three coats of white wash on ceilings complete all as specified and directed. |
| 84 | M & L for Complete removal of exisisting treatment on wallsand applyingtwo coat of oil bound distemper over a coat of primer on internal surfaces complete all as specified and directed. |
| 85 | M&L for Preparation of new plasteredsurfaces and applying two coat of oil bound distemper over a coat of primer oninternal surfaces complete all as specified and directed. |
| 86 | M&L for Preparation of new plasteredsurfaces and applying two coats of exterior weather proof paint over a coat primer white or tinted on external surfaces of wall complete all as specified and directed. |
