|
| 1 | Demolition Bricks (laid flat or on edge) or brick tiles in floors, roof, channels, kerbs, aprons, etc. (each layer all as specified and directed. |
| 2 | Demolition Mud in roofs, any thickness, including plastering and lapping (whether full thicknessremoved or only a part thereof) all as specified and directed. |
| 3 | Removing soil excavated material exc. 1.5Km but n exc 5km and depositing where directed at above the starting pointall as specified and directed. |
| 4 | M&L for cement concrete 1:2:4 type B1 (using 12.5mm graded stone aggregate) on roof paddingsurface finished even and smooth without using extra cement complete all as spd & directed. |
| 5 | M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer including taking down existing roof treatment of any type and roughning cleaning of old concrete roof and applying neat cement slurry including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified land as directed. Make: Asian Paints or equivalent in Sikka, Fosroc and STP Ltd.Note: The application shall be executed on any type of surface and on horizontal/Vertical areas. |
| 6 | M&L providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajas in multiple coats @2.0 litre/sqm. Primary [coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge.Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger/ Nerolac/STP Ltd.Notes: (1) The work shall be executed through authorised applicator of manufacturer only.(2) Authrised Applicator shall be approved by GE before starting of work.(3) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material.Engineer-in-Charge shall deface the original purchase vouchers.(4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor\"s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer. |
| 7 | Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etcup to 10m height complete all as specified and directed. |
| 8 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cementcomplete. |
| 9 | M&L rendering 10mm thick on brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified & directed by Engineer-in- charge. |
| 10 | M&L 5mm thick rendering on concrete surfacesin cement mortar 1:3 , as in ceiling, finsihed the surfaces even and smoothwithout using extra cement. |
| 11 | M & L for applyingtwo coats of oil bond destemberover one coat of birla white wall care putty on newly plastered surfaces(internal) of walls complete all as specified and directed by Engineer-in-charge. |
| 12 | M&L preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 13 | M&L for preparation of newly plastered surfaces of walls and applying two coats of weather proofing exterior emulsion paint (Apex ultima Luxury emulsion ) of asian or equivalent by spray gun / spray machine as per approved make list in particular specification incl one coat of primer/putty up to 4 story bldg complete all as spd and as directed. Note : Rate quated up to G+3 Bldg including scoffolding. |
| 14 | Dismantling wrought iron or mild steel work of any description such as guard bars, grills etc. |
| 15 | S&F Mild steel work as in rooftrusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle channel or flat sections) including distance pieces, cleats etc.(Fe-410-W(Gde E-250)Quality-A) |
| 16 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified. |
| 17 | M&L machine cut kota stone slab flooring 20-25mm thickover 15mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mix with pigment to match the shade of slab complete all as specified |
| 18 | Taking down gear operated rolling shutter for repairs of arean. exc. 8sqm and of any thickness of laths including top cover, spring and shaft, gear box with rod, side guide channels etc and refixing in its original positionafter necessary repair complete all as specified and directed by Engineer- in-charge. |
| 19 | Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame) |
| 20 | S&F Aluminium windowfor outer frame 40mmx114mm with 1.3mm thickness ,corner 45 degree cut & aluminum welded center mullion size 40mmx65mm also welded, shutter(02) size 40mmx60mm 1.3 thickness 45degree cut mechanically joint with 6mm alen key bolt clamp , 12mm SS 202 grade round bar at 100mm cc distance in middle 150mm cc distance for safety grill welded at both ends with 6mm ss 202 grade round bar, 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock , aluminum kobra hinges 2 nos per shutter , 40x18mm 45 degree cut & welded mosquito net shutter(02) with 0.45mm nominal dia of SS wire mesh,SS 75mm long hinges & pvc magnet,full system powder coating with pure polyster coat of any shade as approved by GE and installing with SS screw roll plug and filled with silcone complete all as specified and directed. |
| 21 | Excavating in post holes each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceedings 25cm watering and removing surplus soil to distance n exc 50 m and making good surfac in soft/loose soils |
| 22 | M&L forPCC 1:3:6 type C-2 (40 mm graded agg)for post holes complete all as specified and dircted. |
| 23 | M & L for brick work with Cement Mortar1:6 using sub class \"B\" bricks,old size , straight or curved on plan exceeding 6 m mean radius all as specified and directed. |
| 24 | S&F powder coated Anodiesed aluminium frame for partition, doors, windows, ventilators with one or more rebates incl. joining cleat for fixing etc. complete all as specified. |
| 25 | S&F powder coated Anodiesed aluminium door shutters, aluminium section weighing 0.55 Kg/m incl. necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each doors,Brass 2 lever mortice lock verticle type size 100mm, hinges, anodiesed aluminium snap beading screw withetc. |
| 26 | Supply and fixing PVC sheet consisting of 5mm thick light colour PVC sheet inclusive of fixingon PVC frame /Aluminium frame at site etccomplete all as specified and as directed by Engineer-in- charge. |
| 27 | S&F powder coated not less than50micron Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 28 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS :1868 with minimum anodiccoating of grade AC 15) of approved design/pattern, with approved stadandered section and fixed to existing window frame with CP brass/stainless steel screws @200mm c/c, incl cutting the grill to proper opening size for ficing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of Engineer-in-charge. |
| 29 | S&F door closer aluminium (extruded section) hydraulically regulated designation No. 03, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kgs. |
| 30 | Supply and fixing Floor door stopper 140mm long of aluminium alloy and tongue, anodised with hard drawn steel spring fixed in floor etc completeall as specified & directed by Engineer-in-charge. |
| 31 | S&F 4.8 mm thick sheet glass, ordinary quality and glazing in Aluminium door with solar control files 50 micronin any size each pane. |
| 32 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm & fixed with tinned tacks or galvanised wire staples. |
| 33 | S&Fsteel work as in posts and struts , flats in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 34 | Dismantling and Re-Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standereds, rails, straining blots, etc. incl provn of binding wire. |
| 35 | Supply & Fix chain link MS galvanised fencing any size (75x75mm)or any type complete. |
| 36 | S&F 2mm thick fibre glass reinforced translucent plain sheeting withside lap fixed with srew. |
| 37 | S&F Vitreous china premium/ 1st quality wash down water closet one piece EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc.(excluding flushing cistern & flush pipe) complete in all respect all as specified. |
| 38 | S&F Vitreous Cliina wash basin, angle back, size 600x480mm white, excluding taps, waste,chain and plug and porcelain stopper but including brackets all as specified. |
| 39 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 40 | M&L hard core of broken stone of gauge n. exc. 63mm; deposited, spread and levelled in layers n. exc. 15cm thick watered and rammed to true surface complete all as specified and directed by Engineer-in-Charge. |
| 41 | M&L 75mm thick PCC (1:3:6) C-1 using 20mm graded stone aggregate as in floor, plinth protection etc. finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 42 | M&L chequered tiles 30cmx 30cmx 22-25mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 15mm thick screed in cement mortar 1:6 |
| 43 | S& F Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in CM 1:4 |
| 44 | M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggrgate as in coping to wallcomplete all as specifed and as directed. |
| 45 | S&F mild steel, plain black sheet 1.25mm thick in wall clading, steel gates incl round headed screws, clout nails or rivets and fixed to wood or steel framing. |
| 46 | S&F WPC board, S&F factory made 18mm thick single extruded WPC (Wood Polymer Composit) Solid Board having density not less than 600 kg/ Cbm one side white and other side of board laminated with PVC Foil including finishing all edges at all level for making edge lipping /beading or 0.50 mm thick PVC sheet lipping at all 4 edgesusing binding tape, Solvent, screws, stainless steel, Piano hinges / self closives box type hinges etc Manufactured by ISO 9001-2008 certified company. raj shree or equivalent |
| 47 | S&F75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complete all as specified. |
| 48 | S&F in repairs magnet catchesand striking plate including letting in and fixed, complete all as specified. |
| 49 | S&F Pre-painted galvalume aluminum Zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 50 | M&L for Preparation of new or previously untreated steelsurfaces of any description, over 10 cm width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified. |
| 51 | M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregates, in foundation filling and mass concreteall as specified and directed by Engineer-in-Charge. |
| 52 | S&F for fe 410-w (Gde-E-250) Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting platesall as specified and directed by Engineer-in-Charge. |
| 53 | S&F Modular Cabinet Kitchen accessoriesof Stainless Steelgrade-304,6mm size rod thicknessincluding :-(i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket,(iv) Cup & saucer basket, (v) Glass basket,(vi) Plate basket, (vii) Premium magic corner(viii) Oil Pull out Tray ( Triple basket layer) , (ix) Dust bin, (x) Cleaning kit rack of size as per site requirement all spd and directed by Engr in charge |
| 54 | S & F50 mm dia Galvanised Iron steel tubing, medium grade as in spout in short length, complete all asspecified. |
| 55 | S&F in Soft closing ball bearing telescopic channel of size 22 inch long fixed with screws in cupboards incl all fittings complete all as spd and directed by Engr in charge.Note : Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs |
| 56 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for |
| 57 | S&Ffactory made uPVC white colour three track three panels sliding window with flyproof S.S. wiremesh ( Two nos. glazed & one no. wiremesh panels ) upto 1.50m ht made of big series frame 116 x 45mm & sash 46 x 62mm both having wall thickness of 2.3 + 0.20mm and single glazing bead/ double glazing beading of appropriate dimension ( Area of window upto 2.0 sqmtr) comprising of uPVC multichambered frame and mullion (wherevr required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropraiate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame & sash shall be miterd cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass and SS wire mesh fixed and drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, all complete as per approved drg and direction of Engr in charge. Note: For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile dimension in higher side shall be acceptable but no extra payment on this account shall be made |
| 58 | M & L for 75 mm thick cement concrete 1:3:6type C2(using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished fair and even without using extra cement, complete all as specified. |
| 59 | M&L for 50mm thick PCC 1:3:6 type C2 using 20mm graded stone agg as in sub base complete all as specified.. |
| 60 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed. |
| 61 | S & F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairscomplete all as specified. |
| 62 | S & F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairscomplete all as specified. |
| 63 | Disconnecting existing tanks of cap 1000 ltrs, setting aside (or lower ing if required) for repairs, cleaning, etc. and hoisting if required re- connecting and re-fixing in position and Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc. |
| 64 | S & Fin repair 1000 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I |
| 65 | S & F in repair500 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I I |
| 66 | S&F 110mm bore (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed |
| 67 | S&F PVC (SWR) bend any radius 110mm bore complete all as specified and directed |
| 68 | M&L 100 mm thickPCC(1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor and filling as mass conc. |
| 69 | M & Lsand filling under floors or in foundations including watering and consolidation. |
| 70 | S & F Expanded metal n exc 4 kg weight per square meter, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed. |
| 71 | M & L Machine pressed precast concrete PU coated colourinterlocking paver block any shape and size, with grey cement and pigment confirming to IS 5658-2006 of 80 mm thicknessM-40 Grade complete all as specified |
| 72 | Supply only 3.15 mm dia galvanised steel chain link fencing, 50X50 mm mesh, made up into mattrsses or cages, lapped, wired a all as specified. |
| 73 | M&L mild steel round bars 10 mm dia conforming to FE-410-W (Gde E-250) quality A or Fe-290 (Gde E-165) for use in chain link fencing as wind tie all as specified. |
| 74 | Mild steel screw bolts(machine made) with hexagonal or square heads at one end screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 30 cm and dia of neack exc 12 mm but not exc 20 mm complete all as specified and as directed by Engineer-in-Charge. |
| 75 | M&L for Straight or Circular raking cutting Fair cutting n exc 10 cm width or girth on exposed surfaces of brickwork such as in splays, chamfers, etc.including rubbed finish and good well surface all as specified and directed. |
| 76 | M&L 25 mm thickPCC 1:2:4, type B-0 using 12.5mm graded crushed aggregates as in floor surfaceall as specified and directed. |
| 77 | S&F Exterior Endura Chequered cement concrete colour tiles 300cm X 300cm x 10mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments incl 15 mm thick screed bed or bedding layer for laying floor finishes of tiles CM 1:6 Complete all as specified and directed by Engineer-in-Charge. |
| 78 | M&L two coats of synthetic enamel painting on wooden surfaces not otherwise described over 10cm width or girth over a coat of pink primer inclding prepration of newly untreates surfacescomplete all as specified and directed. |
| 79 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc |
| 80 | Taking down old MCCB , TPN DBs , SPN DBs, sp mcb & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed. |
| 81 | Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed. |
| 82 | M&L point wiring complete with 1.5 Sqm single core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI) marked concealed in wall/fixed to roof, ceiling etc and incl provn of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box made out of 1.60 mm thick sheet steel duly painted concealed in walls, with 3mm thick bakelite/PVC sheet ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc, all as specified and as directed. |
| 83 | One light /Ceiling fan/exhaust fan point controlled by one switch. |
| 84 | One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board. |
| 85 | One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board |
| 86 | All as per 91.01 above but with 2.5 sqmm single core FRLS copper cable. |
| 87 | M&Lpoint wiring with PVC unsheathed multi stranded copper conductorcable 4.00 sqmm FRLS 1100 Volts in New PVC concealed conduitmedium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 4 sqmm FRLS 1100 Volts copper conductor cableas earth continuityconnected to common earthfor one 15 A switch socket power point, all as specified |
| 88 | Supply and fix in repair Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable with one run of 6sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable as earth continuity conductor, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories(Concealed)/ Surface in walls all as specified and as directed. |
| 89 | M&L sub main wiring with two single core PVC insulated FRLScables with stranded copper conductors 4.0 Sqmm ,1100 volts grade on & including PVC conduit not less than 20 mm diacomplete with all accessories medium grade and copper cable 4 Sqmm continuous earth wire complete all as specified and directed.(Note:- (a) Two runs of wirewith 01 run ofearth wire and conduit pipe shall be measured as one length |
| 90 | M&L switch Modular type 6 Amp SP one wayISI marked complete all as specified |
| 91 | S&F Modular socket outlet 2/3 pin 6 Amp socket combined 2 module complete all as specified. |
| 92 | M&L switch Modular type type 16 Amp SP one way,ISI marked complete all as specified |
| 93 | M&LModular type socket outlet 5 pin 6 Amp flush type,ISI marked complete all as specified |
| 94 | M&L Modular type socket outlet 2 in 1,5 pin 6/16 Amps, ISI marked complete all as specified |
| 95 | M&L ceiling rose 3 phase PVCpolycorbonate,isolated body, complete all as specified |
| 96 | M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts,check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed |
| 97 | Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.90, THD< 20%, colour temperature - 6500K, surge protection 3KV in CM, IP-20 protected, meets LED IS specifications, Class - 1,Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 110 Lumens/watt andincluding connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete.Note-All the above mentioned specs will be verified through LM 79 and LM 80 report of NABL accredited Lab before supply of LED fixtures. |
| 98 | Supply and fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by BLDCtechnology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, service valve > 6, AC single phase 230/240 V of size 1200 mm sweep(against normal ceiling fan converted to BLDC ceiling fan) including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed. |
| 99 | S&f exhaust fansAC single phase 230/240 V of size 300 mm sweep,Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, heavy duty, metal body with louvers for fixing of exhaust fan complete |
| 100 | S & F pressure die cast aluminium housing LED street light luminaires with IP66 deg. of protection suitable for50watt LED fitting duly fixed on25 mm dia GI mast including 50X 6 mm thick MS flat with suitable size of fastner including making connection flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed. Note : The Contractor quoated the rates incl all accessories like suitable GI pipe mast, 50x6 mm thick MS flat, fashner, nut & bolts, suitable length of flexiable wire. |
| 101 | Supply & fix in repair factory made epoxy powder coated Distribution Board VTPN-4 ways (IP-54 protection), mechanical impactstrength IK - 09, with cement spill protector double doorfabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to HSN code : 8537. Cat Part No : 812040Note :- MCCB & MCB will be measured & paid separately. |
| 102 | M&L in replacement MCCB 125 Amps, 415 volts, 16 KA , 4P, optium 2.0 adjustable thermal settingIcs=100% Icuas per IEC 60947-II suitable for isolation, fixed over load and fixed short sircuit setting complete all as soecified & as directed. |
| 103 | Supply and fixMCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCBSPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete. |
| 104 | M&L MCB SPN 40 Amp \"B \" curve, 230 volts 10 kA complete all as specified and directed. |
| 105 | M&L MCB SP 6 to 32 Amp \"B\" curve.230 volts 10 kA complete all as specified and directed. |
| 106 | S&F MCB SPN 32 Amps 240 volts 10 KA \"C\" curve and making necessary electrical connections all as specified and directed. |
| 107 | S&F MCB SP6-32 Amps 240 volts 10 KA\"C\" curve and making necessary electrical connections all as specified and directed. |
| 108 | Supply and fixing and connecting LED post top light die cast aluminium housing spigot, powder coated top cover opal PC diffuser having IP 65 protection complete of 45/50 watt LED 100Lm/watt including making necessary electrical connections with suitable size copper multi stranded 1100 volts FRLS copper cable and grouting with PCC as required at site all as specified and directed. |
| 109 | Supply and fixing LED bollard light aluminium extrusion, opal, polycarbonate diffuser for spot and glare free lighting of suitable height not less than 1000mm having IP 65 protection complete of 10/15 watt and grouting with PCC as required at site all as specified. |
| 110 | S&F twin core cable 6 Sqmm PVC insulated heavy duty 1100 volts grade, aluminium conductor drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit 25mm dia in ground including burial in ground as required and directed alongwith conduit accessoriesall as specified and directed. |
| 111 | Supply and fix wall mounted fan 400mm size, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord (two) system complete all as specified and directed. |
| 112 | Supply and fixing LED luminaries 600mmx600mm 36watt 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver,holders and LED lamp siutable for roof ceiling including connecting up with driver three core copper conductor cable of suitable size all as specified. |
| 113 | S&F wiring with two runs of 10 Sqmm twin core PVC insulated cable 1100 volts grade, sinlge stranded aluminium conductor cable drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories laid underground on earth for making electrical connections of bollard lights including necessary excavation and earth work not less than 30cms deep in any type of soil complete including returning filling and removal of excavted soil to a distance not less than 50 mtrall as specified and directed. |
| 114 | M&L tube light grade galvanised with fittings complete to walls and ceiling or laid in floors 40mm dia. |
| 115 | M&L for breaking old existing wall and making a provn for fixing of 160 mm Electric Chimany pipe including making good to the disturbed wall/ portion and matching with existing colour.all as specified and directed. |
| 116 | Supply and Fixing wall mounted angular Electric chimney black colour of suction power not less than 1200Cum/Hr,Al casette with stainless steel outer layer ,touch control panel,3 speedmotor with 250 watt with decorative smart cooker hood SS and glass ,energy efficent LED light with digital display , including ducting not less than 12 feet as per site requirement complete all as specified and as directed by Engr-in-Charge. |
| 117 | Supply,installation, testing and commissioning instant electric water heater with heating element of capacity 3 ltrs complete with all accessories such as safety valve, thermostat, NRV, connection piece etc and connecting with water mixture complete with all other accessories reqd for making water connections all as specified and directed. |
| 118 | S&F Modular box with MCB 20 Amp complete with metal box and 3 Pin, 15 Amps plug top complete all as specified and directed. Note : Rates are inclusive of cutting / chases for mounting Modular metal box concealed in wall and making good to the disturbed surfaces with OBD / colour wash / white wash and wall putty where ever is required. |
| 119 | S & F water heater storage type Geyser vertical type with suitable size of fastner and, inner tank material of superior glass line tank and outer body material of ABS with high pressure with standing enabling (up to 8 bar pressure) capacity including provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection having adjustable knob for temperature control and inner tank should be glass line coated, capacity 25 Ltrs, having heating element 2.0 KW and not less than 5 star rating, suitable for, 230 volt, 50 Hz electric supply complete all as specified and directed. |
| 120 | S&F PVC connection with brass nipple 15 mm x 600 mm long with ISI marked suitable for hot and cold water of 25 ltrs capacity of geyser as hot and cold water connection complete all as specified and directed. |
| 121 | S&F 15mm bore galvanised iron pipe medium gradewith all fittings fixed to wall / ceiling or laid in floor including connections complete all as specified and directed. |
| 122 | S&F bib tap 15mm bore of cast copper alloy (heavy duty) CP fancy type scrwed to iron pipe and fixed complete all as specified and directed. |
| 123 | S&F stop cock of 15 mm dia cast copper alloy (heavy duty) CP fancy type screwed for iron pipe and fixed complete all as specified and directed. |
| 124 | Cutting chases for concealed watertubing or concealed conduct wiring etc and making good cutting n exc 10 cm girth in brick wall complete all as specified and directed. |
| 125 | Schedule of Credit |
