|
| 1 | Dismantling of AC corrugated, semi-corrugated sheets in roof coverings & ridges complete all as specified and directed. |
| 2 | S & F of pre-painted galvalume aluminium zinc coating GI base corrugated steel sheet 0.50 mm thick trapezoidal pattern of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/L-type or J-type or cranked hook bolts complete all as specified and directed. |
| 3 | S & F of pre-painted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge of roof covering / cladding to wall, fixed with self tapping screws/L-type or J-type or cranked hook bolts complete all as specified and directed. |
| 4 | Dismantling timber scantling 40 sq cm and over in framed work in any position complete all as specified and directed. |
| 5 | S & F of second class hard wood timber scantling clean sawn framed and fixed in any position and direction complete all as specified and directed. |
| 6 | S & F of rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides fixed with angle cleats or other connecting plates conforming to Gde Fe-410 W complete all as specified and as directed. |
| 7 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed. |
| 8 | S & FHangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 9 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel withconnecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 10 | M & L in repair 12 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre,including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed. |
| 11 | Demolition of brick work /stone work built in cement mortarcomplete all as specified and directed. |
| 12 | M & L for brick work built in CM 1:6 with sub class old size bricks straight or curved on plan exceeding 6 m mean radius all as specified and directed. |
| 13 | Dismantling floor hearth, wall tiling including cement mortar bedding, backing complete all as specified and directed. |
| 14 | M & L for double charged vitrified tiles (dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to matchover and incl 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 15 | M & L for double charged vitrified tiles (dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in vertical surface etc set and jointed in neat cement slurry and pointed in coloured cement to matchover and including 10mm thick rendering in CM (1:4) complete all as specified and directed. |
| 16 | M & L for non-skid ceramic coloured floor tiles exc 0.11sqm but not exc. 0.18sqm as in floors set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade over and including 15mm thick screed bed in CM(1:6) complete all as specified and directed. |
| 17 | M & L for glazed ceramic coloured wall tiles 300x450x7 to 8mm thick as in vertical surface such as skirting/dado tiles set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade over and including 10mm thick rendering in CM (1:4) complete all as specified and directed. |
| 18 | Demolition of cement concrete unreinforced in ground floor & paving n.exc 15cm thicknessand removal of debris from site complete all as specified and directed. |
| 19 | M & L for 75mm thick cement concrete type C1 (1:3:6) using 20mm graded aggregate as in path, plinth protection finished surface even and smooth with out using extra cement complete all as specified and directed. |
| 20 | Taking down cement plaster of any description in any position incl raking out joints making for key, scrubbing down with water etc and removal of debris from site complete all as specified and directed. |
| 21 | M & L for 15mm thick rendering in CM (1:4) on fair faces of brick work in walls and finishing the surfaces even and fair complete all as specified and directed. |
| 22 | M & L for preparation of new wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 23 | M & L for 15mm thick rendering in CM (1:6) on other than fair faces of brick work in walls and finishing the surfaces even and fair complete all as specified and directed. |
| 24 | M & L for preparation of newplastered surface of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and incl Priming plastered and other surfaces with alkaliresistant priming paintcomplete over a coat of 1mm thick Birla white wall care putty on wall (two or more coats) , as per manufacturer\"s specification complete all as specified and directed. |
| 25 | M & L for complete removal of existing treatment of old surface of wall and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. includingover and incl Priming plastered and other surfaces with alkali resistant priming paint over a coat of 1mm thick Birla white wall care putty on wall (two or more coats) complete all as specified and directed. |
| 26 | M & L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 27 | Taking down chowkhats or frames with shutter(without taking off shutter from the frame) area not exc. 1.5 sqmand making the surface of brick wall good plastering, around the opening complete all as specified and directed. |
| 28 | Takingdown chowkhats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each and making the surface of brick wall good plastering, around the openingcomplete all as specified and directed. |
| 29 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 30 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screwscomplete all as specified and directed.(Note: Stainless steel butt hinges shall be paid separately) |
| 31 | S & F of aluminium butt hinges medium weight 100mm type C-21 complete all as specified and directed. |
| 32 | M & L IInd class hard wood plain solid straight chowkats and frame wrought, framed rebated on the solid put together withglue, pinned at joints and fixed in position complete all as specified and directed. |
| 33 | S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles conforming to Fe 410-O 0r Fe 310-O complete all as specified and directed. |
| 34 | M & L for Plain Cement Concrete 1:3:6type C-1 (using 20mm graded stone aggregate) as in bed blocks for hold fast, coping, benching and similar work etc complete all as specified and directed. |
| 35 | M & L for framed work as in grills, gratings etc. with ends of bars shouldered and / or rivetted, or forged into spikes; framed guard bars; barred iron door, railings and similar work conforming to Fe 290-0 or Fe 310-0, complete all as specified and directed. |
| 36 | M & L for 35mm thick 2nd class hard wood factory made wire gauged shutter edged of frame plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified and fitted to chowkat complete all as specified and directed. |
| 37 | S & F 30mm thick flush shutter, solid core construction with block board core and ply wood panels commercial type on both side complete all as specified and directed. |
| 38 | S & F mild steel Butt hinges of medium weight and fixed 100mmcomplete all as specified and directed. |
| 39 | S & F 200mm long alumunium anodised barrel tower bolts of extructed section complete all as directed and directed. |
| 40 | S & F alumunium handle, fabricated type, anodised 150 mm longcomplete all as specified and directed. |
| 41 | S & F 300mm long ISI marked mild steel sliding door bolts, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 42 | S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed 140 MM Overall length of cover plate complete all as specified and directed. |
| 43 | S & F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 44 | S & F of powder coated aluminium frame for doors, windows, ventilators with one or more rebates or three track section for windows including joining cleat for fixing etc. complete all as specified and directed. |
| 45 | S & F of powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminum snap beading screws etc. complete all as specified and directed. |
| 46 | S & F Powder coated Aluminium three track sliding windows with 2 Nos. glazed window shutters with 4mm thick plain sheet glass and 1 No. gauzed window shutter with stainless steel wire cloth0.36mm dia of wire and average width of aperture 1.4mmwith members of window shutter of section 100x38x12x1.25 to 1.5 mm having thrtee track (two of glass & one of stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aparture 1.40mm) with members of window shutters of section 38x12x1.5mm and other standard Bombay sliding sections including necessery fiber wheel rollers suitable handles to facilitate sliding and all necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, etc complete all as specified and directed. |
| 47 | S & F of Stainless Steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and direceted. |
| 48 | S & F in repair of Stainless Steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and direceted. |
| 49 | S & F in repair harrison/curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 50 | Taking down GI pipes and connection including cleaning for refixing or removal to store of 15mm bore complete all as specified and directed. |
| 51 | Taking down GI pipes and connection including cleaning for refixing or removal to store of 20mm bore complete all as specified and directed. |
| 52 | S & F of galvanised iron tubing medium grade, with all fittings and fixed complete to wall and ceiling or laid in floors concealed where necessary bore of tube 15mm complete all as specified and directed. |
| 53 | S & F of galvanised iron tubing medium grade, with all fittings and fixed complete to wall and ceiling or laid in floors concealed where necessary bore of tube 20mm all as specified and directed. |
| 54 | S & F in repairs Vitreous China Squatting pan of Orissa pattern, size 580x440 mm size white with integral foot rest with Cast Iron `P\" or `S\" trap, front or back inlet andincluding connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern) including providing new flush pipe complet all as specified and directed. |
| 55 | S & F in repairs Vitreous China EWC Pedastal pattern white, including mild steel chromium plated or aluminised hinging device seat cover white with Cast Iron `P\" or `S\" trap, front or back inlet andincluding connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including cement concrete bedding complete including making good to floor complete all as specified and directed. |
| 56 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 57 | S & F in repair PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 58 | Supply, hoisting and fixing in repairs of rotational moulded PVC water storage tank, 500 litres capacity cylindrical vertical type triple-layered with closed top including inlet, PVC float valve and necessary fittings outlet and wash out holes of approved make complete all as specified and as directed. |
| 59 | S & F of vitreous china wash hand basin white flat back of size 550mm x 400mm including cutting for and pinning ends of brackets including 32mm bore PTMT waste coupling (half or full threaded) and PVC waste pipe 32mm dia and 15mm bore PVC connection 450mm long with brass union and jam nuts on both sides and fixed on a pair of MS cantilever bracket of appropriate size complete all as specified and directed. |
| 60 | S & F in repairs of 15mm bore dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered `Hot\" or `Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 61 | S & F in repairs of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 62 | S & F in repairs of 15mm dia PVC connection with PTMT nuts of length 450mm complete all as specified and directed. |
| 63 | S & F of 15mm bore angular stop cock fancy type, cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed. |
| 64 | S & F in repairs of 15mm CP fancy type bib cock long body complete all as specified and directed. |
| 65 | S & F in repairs towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed. |
| 66 | S & F in repairs of soap dish holder CP complete all as specified and directed. |
| 67 | S & F of 125mm chromium plated grating with or without waste hole complete all as specified and directed. |
| 68 | Taking down rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to Store (measured over all as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 69 | S & F of PVC (SWR) 110mm dia rain water pipe single socket any length with rubber rings joints fixed to walls complete all as specified and directed. |
| 70 | S & F of PVC (SWR) 110mm dia rain water pipe single socket any length with rubber rings joints laid in trenches or in floors complete all as specified and directed. |
| 71 | S & F of PVC (SWR) 110mm dia bend any radius including cutting brick wall / concrete and making good the disturbed surfaces complete all as specified and directed. |
| 72 | S & F PVC (SWR) 110 mm junction (Single T) equal or unequal 110mm complete all as specified and directed. |
| 73 | S & F of vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement mortar 1:3 including PTMT waste coupling, PVC waste pipe complete all as specified and directed. |
| 74 | M & L for 25mmm thick cement concrete type B-1 1:2:4 (20mm graded aggregate) as in sub bases, sub floors, pavings etccomplete all as specified and directed. |
| 75 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 76 | M & L for hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled andwatered and rammed to a true surface complete including filling interstices with approved fine material like earth or grit etc complete all as specified and directed. |
| 77 | M & L for 100mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and directed. |
| 78 | M & L for sand cushioning under interlocking paver blocks complete all as specified and directed. |
| 79 | M & L for 100mm thick rubber moulded machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade with grey cement and pigment complete all as specified and directed. |
| 80 | M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work of walls, finished even and smooth without using extra cement complete all as specified and directed. |
| 81 | M & L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof kerbs, coping, benching etc including weathering slightly rounded or chamfered angles and throating etc including necessary formwork complete all as specified and directed. |
| 82 | Removing excavated material (soil) to a distance not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed. |
| 83 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 84 | M&L, Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No.in and including medium grade PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, including cutting chases in wall and making good disturbed surface to match of walls/ceiling, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes(with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dollycomplete all as specified and directed at site for one light / fan point controlled by one switch with cable size 1.5 sqmm.Note:Switch and socket to be measured and paid for separately. |
| 85 | All as per Serial item No. 84 here in before but One 3 Pin, 5 Amp socket outlet point on an independent board with cable size 1.5 sqmm complete all as specified and directed by Engr-in-charge. |
| 86 | All as per Serial item No. 84 here in before but One 3 Pin, 5 Amp socket outlet point on same board with other switches with cable size 1.5 sqmm complete all as specified and directed. |
| 87 | All as per Serial item No. 84 here in before but One 3 pin, 15 Amp socket outlet point on an independent board with cable size 2.5 sqmm complete all as specified and directed. |
| 88 | Supply and fixing switch piano flush type, single pole, one way, 6 Amps complete all as specified and directed. |
| 89 | Supply and fixing switch piano flush type, single pole, one way, 16 Amps complete all as specified and directed. |
| 90 | Supply and fixing socket outlet 2 in 1, 3 pin, 06 Amps complete all as specified and directed. |
| 91 | Supply and fixing socket outlet 2 in 1, 3 pin, 06/16 Amps complete all as specified and directed. |
| 92 | S&F Ceiling rose surface bakelite three terminal complete all as specified and directed. |
| 93 | S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificatefactory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 94 | S&F 240V, 10 KA \"B\" curve MCB of Single Pole and current carrying capacity 6 to 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 95 | S&F 240V, 10 KA \"B\" curve MCB of Single Pole & Neutral and current carrying capacity 40 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 96 | Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 97 | M&L Taking down carefully ceiling fan of any sweep complete with all accessories, dismantling blades and deposit in safe custody of AGE E/M Yard for BER procedure complete all as specified and directed. |
| 98 | Supply and fixing LED luminaire ( 2 feet x 2 feet) LED Backlit Panel for Home & Office, 35/36 W, Cool White light 6500K, 120 lumens/watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof/False ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 99 | Supply and Fixing wall/surface mountingluminaires LED Tubelight integrated fitting 20 W, 6000 K,120 lumens/watt , 230V with extruded Aluminium housing and without powder coated, 4 feet long with frosted PMMA/PC diffuser, integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangementscomplete all as specified and directed. |
| 100 | Supply and FixingLED Building Street/Security light 35 Watt with high power LED source (>110lumen/watt) PDC housing, IP66 and IK 07with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 1.0 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and directed. |
| 101 | M&L in replacement for Submain wiring with two single core unsheathed, PVC (FRLSH) insulated, 1100 Volts grade cable with 6.0 sqmm nominal cross sectional area Multi-stranded copper conductor and one single core green unsheathed, PVC (FRLSH) insulated, 1100 Volts grade cable with 6.0 sqmm Multi-stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia including all conduit and fixing accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of walls/ceiling complete all as specified and directed. (Note - PVC Conduit and accessories shall be deemed to be included in the quoted rate) |
| 102 | M&L Earthing complete with galvanised steel earth plate electrode60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6 ) C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner complete all as specified and directed. |
| 103 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 104 | M&L, Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No.in and including medium grade PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, including cutting chases in wall and making good disturbed surface to match of walls/ceiling, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes(with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dollycomplete all as specified and directed at site for one light / fan point controlled by one switch with cable size 1.5 sqmm.Note:Switch and socket to be measured and paid for separately. |
| 105 | S&F of exhaust fan, Metal body, AC single phase, 230 Volt heavy duty of size 300 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm andCutting, opening circular/Rectangular in shape hole on wall for fixing of exhaust fan of size 300 mm sweep incl plastering and making good the disturbed surface surrounding complete all as specified and directed Note : Old Exhaust fan deposit in safe custody of AGE E/M (West) Yard. |
| 106 | Supply & fix Exhaust fans, plastic body, AC, single phase, 230/240 V of size 250 mm sweep with louver including provn of flexible three core cable from ceiling rose to terminal for making connection, fitting on wall, including Cutting, opening circular/Rectangular in shape hole on wall for fixing of exhaust fan of size 250 mm sweep incl plastering and making good the disturbed surface surrounding and all necessary fixing accessories complate all as specified and asdirected by Engr-in-charge.Note : Old Exhaust fan deposit in safe custody of AGE E/M (West) Yard. |
| 107 | S&F wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10 W, 6500 K, 230V ,100 lumens/watt,with extruded Aluminium housing and without powder coated, integrated electronic driver completeincluding Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed. |
| 108 | S&F 1100V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVCsheathed in service connection suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular Stranded conductor 10 sqmm aluminiuam conductor complete all as specified and directed.. |
