|
| 1 | Dismantling of cross arms, channels, angle iron, clamps, nut, bolts, stay wire, stay assembly, GI wire, anti climbing devices etc complete all as specified and directed by Engineer-in-Charge. |
| 2 | Dismantlingof ACSR conductors of any sizeby opening the binding wire from LT electric poles complete all as specified and directed |
| 3 | Taking down any type insulators all as specified and directed by Engineer-in-Charge. |
| 4 | Taking down PCC pole 9 meters all as specified and directed. |
| 5 | Taking out any type LT UG cableany size including GI pipe/ bricks all as specified anddirected. |
| 6 | Excavation in trenches in soft/ loose soil including cutting road surfaces n.exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for poles, stay, cable, pipe etc getting out completeall as specified and directed. |
| 7 | Removal of excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 8 | Returning, filling in, including spreading, leveling,watering and well ramming in layersn.exc 25 cm thick in soft loose soil all as specified. |
| 9 | Supply and lay brick common burnt sub class \"B\" old size (compressive strength not less than 75 kg per sqcm) for protection of cable laidin trenches for under ground cable complete all as specified and directed. |
| 10 | M&L for sand cushioning in trenches using fine sand to under ground cable, laid in two layers 15cm before laying the cable & 8cm after laying the cable complete all as specified and directed. |
| 11 | S&Fin repairfor cable protection GI tubinglight grade fixedalong the pole/ wall/ under road of size 100 mm bore with necessary clamps, nut and bolts all as specified and directed by Engineer -in- Charge. (Note : Clamps, nut and bolt will be measured and paid for separately). |
| 12 | All as per Srl item No 11 here-in-before but size 50mm. |
| 13 | Supply and laying cableXLPE insulated screenedPVC bedded galvanised steel strip armoured electric power cables 1100 volts grade with stranded aluminium conductor 16 Sqmm 4 core complete all as specified and directed. |
| 14 | Supply and layingcable XLPE insulated screenedPVC bedded galvanised steel strip armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 70 Sqmm 3.5 core complete all as specified and directed. |
| 15 | Supply and layingcable XLPE insulated screenedPVC bedded galvanised steel strip armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 240 Sqmm 3.5 core complete all as specified and directed. |
| 16 | M&L forearthing of machinery/ equipment installed att power house/ substation, using 25 x 4mm galavanised MS strip and MS galvanised plate of size 600 x 600 x 6mm as earth electrode 2009 (Part-I) complete all as specified and directed. |
| 17 | Supplying, installing, testing and commissioning factory made outdoortype dust and vermin proof LTpanel board cubical double door hinged type compartmentlised of suitable size 415 volt, AC 50 Hz fabricated of CRCA sheet 3.15mm thick machine pressed and angle iron frame 40mm x 40mm x 6mm grouted in PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) powder coated inside and outside complete including 4 pole aluminium busbar of capacity 500 amps mounted on porcelain insulators and enclosed in chamber and connection from incoming and outgoing electric cable with suitable size thimbles/ lugs with openable shutters on both side and incomin g :-(i) MCCB 350 Amp 35KA repturing capacity 4 pole with adjustable thermal release - out going.(ii)MCCB 200 Amps 35 KA repturing capacity 4 pole with adjustable thermal release - 01 No.(iii) MCCB 100 Amps 35 KA repturing capacity 4 pole with adjustable thermal release - 02 No.(iv)Busbar champber of 500 Amp capacity busbar for in and out of the LT cables (minimum four cable in/ out provision to be provided. (iv)Digital volt meter 0-500 volt with selector switch, digital amp meter of capacity 0-250 Amp alongwith selector switchees 3 x LED type indicator (RYB) 3 x 300/ 5 tape wound CT\"s 3 x SP MCBs of 6 Amp for protection of indicator - 01 No. |
| 18 | A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender.The Schedule of Credit is pre-priced by MES.The final amount of the tender shall be arrived at after deducting the total amount of Rs.32,366.00 Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit. |
