|
| 1 | Planting/Grassing with Doob Grass No.1 quality (Fresh and good quality as approved) area of plantation of grass with sectional rows having distance 7.5cm apart both ways and watering including surface excavation of earth not exc 30cm deep and averaging 15cm deep including cleaning away all grass, vegetation, shurbs, roots of trees and removing rubbish off the permises complete all as directed.Note:- (i) Supply and mixing of manure/Cow dung with excavated earth, surface dressing of the area to a true level and required slope for grass plantation, extra earth required if any shall be deemed to inclusive in the Unit rate Quoted.(ii) Maintance of one year from certified date of completion is deemed to be inslusive in the in the Unit rate Quoted. |
| 2 | Planting of the following tree species 2 to 2.5 years old with proportional girth and of ever green and or shady species including preperation of plant bed, digging holes, mixing with manure/cow dung including watering, manuring and maintance for one years for the followings:- |
| 3 | Jasmine |
| 4 | Bottle Brush |
| 5 | Silver Oak |
| 6 | Royal Palm |
| 7 | Ashoka |
| 8 | Campus |
| 9 | Bugenella |
| 10 | Lechi with seed |
| 11 | Lechi without seed |
| 12 | Bettel Nut |
| 13 | Jamun |
| 14 | M&L preparing surfaces for hedging by taking out wild grass etc and planting necessary plants and flowers, putting manure etc as required including maintance for one years complete all as directed |
| 15 | Provision of bamboo tree guard, height not less than 1.5 meter from GL, spacing of bamboo not less than 150mm center to center (thickness of bamboo splits not less than 10mm) complete all as directed.Note:- (i) Bamboo used shall as approved |
| 16 | Surface excavation in soft/loose soil, n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out, complete allas directed. |
| 17 | Excavation in trenches n.exc. 1.5 m width and n.exc. 1.5 m in depth in soft/loose soil & getting out, complete all as directed. |
| 18 | Excavation over ares n.exc.1.5 m in depth in soft/loose soil & getting out, complete all as directed. |
| 19 | M&L plain cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 20 | M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 mmean radius built in cement mortar 1:6complete all as specified and directed. |
| 21 | M&L for Brickwork with burnt old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 22 | M&L Hardcore of gauge n exc. 63 mm, Broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface,complete all as specified and directed. |
| 23 | M&L 50mmthick cement concrete type B-2 (1:2:4) using 40 mm graded stone aggregate as in floor finished even and fair without using extra cement complete all as specified and directed.. |
| 24 | M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternatebays (not exceeding 2 Sqm each)and finished even and smooth without using extra cement and providing jointsthroughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed. |
| 25 | Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed. |
| 26 | Removing excavated material n.exc 50m and depositing were directed at a level not exceeding 1.5m above the starting level complete all as specified and as directed. |
| 27 | M&L for Rendering 15 mm thick on other thanfair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and fair complete all as specified and as directed. |
| 28 | M&L for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm complete all as specified and directed. |
| 29 | M&L Glazed ceramic coloured tiles in vertical surfaces 300x 200x 7 mm thick set and jointed in neat cement slurry & pointed in white or colour cement to match including backing coat 10 mm thick in Cement Mortar 1:4, complete all as specified and directed. |
| 30 | M&L Non - skidcoloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15 mm thick Screed bed or bedding layer of cement mortar 1:6,for laying floor finishes, complete all as specified and directed. |
| 31 | M&L Pre polished chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over cement screed 15 mm thick in cement mortar 1:6 complete allas specified and directed. |
| 32 | M&L Sand filling under floors or in foundations including watering and conosoldiation complete all as specified and directed. |
| 33 | M&L TMT reinforcement 10 mm dia and over cut to length bent to shape including cranking, banding spirally for hooping columns, hookingend and binding with and includingmild steel wire not less than 0.90 mm dia (annealed) complete all as specified anddirected.. |
| 34 | M&L TMT bar 5 mm dia and over upto and including 10mm dia in strrups as inincluding cutting, bending and binding with and including mild steel not less than 0.9 mm dia (annealed)complete all as specified anddirected . |
| 35 | M&L Black Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including including 20 mm thick Screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed. |
| 36 | M&L Black Granite (of any type) tiles 18-20mm thick machine cut, as in in skirting/dado, vertical surfaces,laid bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including including 15 mm thick Screed bed or bedding layer of cement mortar 1:4, complete all as specified and directed. |
| 37 | S&F stone clading in walls with flat natural stone of size not exc 30cm fixed in regular shape or course and pointed in cement mortar 1:4complete all as specified and directed. |
| 38 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165, including necessary prepration of surface and applying a coat of red oxide zinc chrome primer, complete all as specified and as directed. |
| 39 | M&Lpreparation of new steel surfaces of any description over 10cm width or girth and applyingtwo coats of synthetic enamel paint complete all as specified and directed. |
| 40 | M&L plain cement concrete type B-2 (1:2:4) using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 41 | S&F 600mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. |
