|
| 1 | S/F the following size/modules G.I box along with modular base and cover plate for modular switches in recess etc as reqd. |
| 2 | 6 module (200mmX75mm) |
| 3 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed heavy class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B |
| 4 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required |
| 5 | 3 x 2.5 sqmm |
| 6 | 3 x 4 sqmm |
| 7 | 3 x 6 sqmm |
| 8 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required |
| 9 | Supplying and fixingtwo module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 10 | S/F of following sizes of heavy class PVC conduit/Batten along with all accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required |
| 11 | 25 mm |
| 12 | 20mm |
| 13 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 x 10 + 2 x 6 sqmm |
| 14 | Supply, Installation, testing and commissioning of 4 feet 25 watt LED aluminum extruded linear fixtures to align the linear lighting layout with shapes like L, Y,T & + etc. having 120 Lm/Watt , 6500K , Opal/prismatic diffuser , 50mm width, surge 4KV, voltage 140-270 and having sutable suspension mounting arrangment etc. as required.equivalent to Philips Make, Cat No.SP780 H LED25S-6500 PSU W5L112 OD S1 WH. |
| 15 | Supplying and fixing of 1 Module RJ-45 computer socket i/o Cat6 on existing box/cover plate andmaking of connection etc. complete as required. Make -Wipro North west Cat No-R5200 or eqivalent model of Legrand/Schneider |
| 16 | Supplying and fixing of following exhaust fan 900 RPM includingmaking connection wooden work if reqd etc as reqd |
| 17 | 12\" Exhaust fan |
| 18 | !5\" exhaust fan |
| 19 | Supplying and Fixing of snap-on DLP trunking of size 105mm x 50 mm with cover and including accessories such as cover, Flat angle, end caps, internal/external angle support etc. on the wall/surface complete all as requied. |
| 20 | 105 mm x 50 mm with all accessories. |
| 21 | Supplying and fixing of following LED mirror light fittingincludingmaking connection etc as reqd. ( Philips ) |
| 22 | Supply, installation, testing and commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush less Direct Currnet ( BLDC) Motor, class of insulation: B3 nos blades, 30 cm long down rod, 2 nos canopies, shackles kit, safety rope, copper winidng , Power factor, not less than 0.9 service value ( CM/M/W) minimum 6.00 , Air delivery minimum 219 Cum/min 350 RPM ( tolerance as per IS: 374-2019) , THD less than 10% remote of electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C ( max) insulation resistance more than 2 mega ohm, suitable for 230 volt 50 HZ single phase 415 volt AC supply , earthing etc complete as reqd. |
| 23 | Supplying and fixing of 15 Ltr Geyser white colour and pressure rating for suitable highrise includingmaking connection etc as reqd. |
| 24 | Replacemnt of 630 A Rating, 50 KA braking capacity , 4 pole MCCB with microprocessor release (Make Legrand, Cat No. , DPX^3, 422075) and terminal sreaders in existing cubical panel board including drilling holes in cubical panel connections, etc. as required |
| 25 | Supplying and fixing of 40A/50A/63A, 10 KA rating, double pole, 415 V, MCB in the existing MCB DB complete with connections, testing andcommissioning etc. as required. Make-Hager, Cat.No-NCN240N/NCN250N/NCN263N or equivalent model of Legrand/ABB. |
| 26 | Supply, Installation, testing and commissioning of pre-wired, single box fitting with one no. LED tube of frosted cover design, 18 Watt, 2100 lm, 50000 burning hours, size 1200 mm complete i/c all accessories etc. directly on ceiling/wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor cable and earthing etc. as required. fitting equivalent to Philips Make, Cat No. TMC 502 1xT-LED 22W, Tube equivalent to Philips Make, Cat No. Mas LEDTube 1200mm 18W 865 T8I-2100lm |
