|
| 1 | Supply of AC-3 duty 3 pole power contactor with 2 NO & 2 NC aux contacts complete with 415V/220V operating coil suitable for (L&T, BCH,T.C., Siemens, C&Smake).110 Amp. |
| 2 | Supplying of LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glasswith company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT3000 K to 5700K, Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt. LED driver efficiency > 85 %.(fittings required LM-79 & LM-80 certificates) (NOTE: Below description have shown ranges of Wattage capacity of LED fittings. The Engineer incharge may select any wattage capacity between the ranges shown.) (Make - Crompton, Havells, HPL) 36 Watt - Cat.-III. |
| 3 | Supply of Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as directed. 16 Amp. (110A set). |
| 4 | Providing Approved makeTriple Pole Metal / Iron Clad Switch (ICTP) & Fuse with neutral link 415/500 V confirming to IS. 63 Amp. Cat. - III |
| 5 | Supply offollowing type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erectedwith necessary connections as per site situation directed by Engineer In charge. 6 Amp. Cat. III |
| 6 | Supply of electrical insulation L.T. Tape role with ISI marked having nominal width 1.8 cms nominal length 9.0 mtr nominal thickness 0.125 mm and having self adhesive PVCPVC Tap. |
| 7 | Supply ofKITKAT pattern porcelain cut-out fuse with base of following current capacity erected on existing block board. 63 Amp. |
| 8 | Supply of Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark25 Amp. Cat. - III. |
| 9 | Supply of 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity 40 Amp. Cat. - III |
| 10 | Supply of 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity 25 Amp. Cat. - III. |
| 11 | Supply of240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity 32 Amp. Cat. - III. |
| 12 | Supply of 415 V MCB three Polefor Motor & InductiveLoad (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity63 Amp. Cat. - III. |
| 13 | Providing XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe of following size of cables (make-RR Cable, Polycab, Polycab, Attracab, Allwyn).Armoured Aluminium 4 core 10 Sq.mm wire. |
| 14 | Providing XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe of following size of cables (Make-RR Cable, Poycab, Polycab, Attracab, Allwyn).Armoured Aluminium 4 core 4 Sq.mm wire |
| 15 | Providing XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable 1.1 KV.grade to be erected as directed of following size. (Make-RR Cable, Poycab, Polycab, Attracab, Allwyn). Unarmoured Aluminium 4 Core 4 Sq.mm wire. |
| 16 | Providing of Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe offollowing size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (Make-RR Cable, Poycab, Polycab, Attracab, Allwyn).Single Core 2.5 Sq.mm wire. |
| 17 | Providing of Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe offollowing size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (Make-RR Cable, Poycab, Polycab, Attracab, Allwyn) Single Core 1.5 Sq.mm wire. |
| 18 | Providing of Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe offollowing size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (Make-RR Cable, Poycab, Polycab, Attracab, Allwyn). Single Core 4 Sq.mm wire. |
| 19 | Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable 1.1 KV.grade to be erected as directed of following size. (Make-RR Cable, Poycab, Polycab, Attracab, Allwyn). Unarmoured Aluminium 2 Core 4 Sq.mm Service wire. |
| 20 | Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable 1.1 KV.grade to be erected as directed of following size. (Make-RR Cable, Poycab, Polycab, Attracab, Allwyn). Unarmoured Aluminium 2 Core 6 Sq.mm Service wire |
| 21 | Supplying of LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glasswith company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)(Make-Havells, Bajaj, Crompton, Philips, Syska). 190W LED Cat. - III |
