|
| 1 | Task Name : C-1.5 Material |
| 2 | 11 KV AL 59 ACS Covered Conductor 78.82 sq.mm along with MVCC accessories as per EN:50397 Calculated for 1 KM Single Phase Feeder, tension/dead/anchoring clamps with piercing connector suitable for MVCC, IPC for CC to CC connection,EN-50397 -P-2 |
| 3 | Erection cost of 11 KV AL 59 ACS Covered Conductor 78.82 sq.mm along with MVCC accessories as per EN:50397 Calculated for 1 KM Single Phase Feeder, tension/dead/anchoring clamps with piercing connector suitable for MVCC, IPC for CC to CC connection,EN-50397 -P-2 |
| 4 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 5 | Erection Cost Of 11 KV Pin Insulator Polymer Composit (5 KN) |
| 6 | 11 KV Strain hardware (T&C type) fittings |
| 7 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 8 | Fixing of Disc Insulator with H/ W 11 KV side |
| 9 | 140 Kg.,8.0 Mtrs. long PCC pole |
| 10 | Labour charge for erection of 140 Kg.,8.0 Mtrs. long PCC pole (Erection charge @60%+Transportation charge@40%) |
| 11 | AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 12 | Erection cost of AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 13 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-11 mtr. Long = 408.1 kg |
| 14 | Erection cost of material with transportation for H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-11 mtr. Long = 408.1 kg |
| 15 | 11 KV Single pole cut point fitting 100x50x6 mm channel |
| 16 | Erection cost of 11 KV Single pole cut point fitting 100x50x6 mm channel |
| 17 | 11 KV Top clamp 65X65X6 mm. angle type |
| 18 | 11 KV V cross arm 65X65X6 mm. angle type |
| 19 | Fixing of 11 KV V-cross arm with Top Clamp |
| 20 | Aluminium Binding wire and tape |
| 21 | Aluminium paint |
| 22 | Erection cost of Aluminium paint |
| 23 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 24 | Erection cost of Anti climbing Device (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 25 | Back Clamp for 280 Kg PCC Pole of MS Flat 65x8mm.(Each weight 1.92 Kg) |
| 26 | Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) |
| 27 | Back filling of poles with boulders. |
| 28 | Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 29 | Clamp 65X8 MM of MS Flat for pcc Pole 280Kg. (Each weight 3.04 kg ) |
| 30 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 31 | Erection cost of Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 32 | Concreting of structures & foundation (1:3:6). |
| 33 | Erection cost of Concreting of structures & foundation (1:3:6) |
| 34 | Danger Boards Enamelled 11 KV |
| 35 | Erection cost of Danger Boards Enamelled 11 KV |
| 36 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 37 | M.S.Nuts with Bolts |
| 38 | Red oxide paint |
| 39 | Erection cost of Red oxide paint |
| 40 | Stay Insulators 90X65mm |
| 41 | Stay set complete without Stay wire 16 mm. (Painted) |
| 42 | Erection cost of Stay set complete without Stay wire 16 mm. (Painted) |
| 43 | STAY WIRE 7/3.15 MM.(7/10 SWG) |
| 44 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 45 | GST 18% |
| 46 | Task Name : E-1.1 Material |
| 47 | 11 KV D.O. Fuse Unit Polymer type |
| 48 | Erection cost of 11 KV D.O. Fuse Unit Polymer type |
| 49 | 11 KV Strain hardware (T&C type) fittings |
| 50 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 51 | Fixing of Disc Insulator with H/ W 11 KV side |
| 52 | 11/0.4 KV Distribution transformer 25 KVA (Conventional) (Aluminium wound)(Rep-BGP) |
| 53 | Handling & Installation of Distribution Transformer (DTR) on DP, tightening with turn buckles on both sides, poles clamping and bolting of base jumpering on HT side |
| 54 | 140 Kg.,8.0 Mtrs. long PCC pole |
| 55 | Labour charge for erection of 140 Kg.,8.0 Mtrs. long PCC pole (Erection charge @60%+Transportation charge@40%) |
| 56 | 9 KV Gapless type ( 5KA) Polymer for DTR |
| 57 | Erection cost of 9 KV Gapless type ( 5KA) Polymer for DTR |
| 58 | AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 59 | Erection cost of AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 60 | PVC 2 CORE UN ARMOURED 2.5 SQMM ALUMINIUM CONDUCTOR |
| 61 | Single phase Electronic meter with data downloading facility & box 5-30 Amps. |
| 62 | Erection cost of Single phase Electronic meter with data downloading facility & box 5-30 Amps. |
| 63 | Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box |
| 64 | XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts |
| 65 | Aluminium paint |
| 66 | Erection cost of Aluminium paint |
| 67 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 68 | Erection cost of Anti climbing Device (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 69 | Back Clamp for 280 Kg PCC Pole of MS Flat 65x8mm.(Each weight 1.92 Kg) |
| 70 | Bentonite compound powder |
| 71 | Bi-metallic clamps Distribution Transformers Bushing |
| 72 | Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC |
| 73 | Clamp 65X8 MM of MS Flat for pcc Pole 280Kg. (Each weight 3.04 kg ) |
| 74 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 75 | Erection cost of Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 76 | Concreting of structures & foundation (1:3:6). |
| 77 | Erection cost of Concreting of structures & foundation (1:3:6) |
| 78 | D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel |
| 79 | Erection cost of D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel |
| 80 | D.O.Mounting Channel 75x40x6mm |
| 81 | Erection cost of D.O.Mounting Channel 75x40x6mm |
| 82 | Danger Boards Enamelled 11 KV |
| 83 | Erection cost of Danger Boards Enamelled 11 KV |
| 84 | G.I. STRIP 25X3 MM1 |
| 85 | G.I.Pipe 40 mm Dia C grade type |
| 86 | Erection cost of G.I.Pipe 40 mm Dia C grade type |
| 87 | Galvanized nut & bolt with washer |
| 88 | M.S.Nuts with Bolts |
| 89 | Meter cum protection box for 25 KVA DTR |
| 90 | Red oxide paint |
| 91 | Erection cost of Red oxide paint |
| 92 | Stay Insulators 90X65mm |
| 93 | Stay set complete without Stay wire 16 mm. (Painted) |
| 94 | Erection cost of Stay set complete without Stay wire 16 mm. (Painted) |
| 95 | STAY WIRE 7/3.15 MM.(7/10 SWG) |
| 96 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 97 | Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels |
| 98 | Transformer mounting Channel (100X50x6 mm.) |
| 99 | Erection cost of Transformer mounting Channel (100X50x6 mm.) |
| 100 | GST 18% Please Enable Macros to View BoQ information |