|
| 1 | Demolition of brick work/ stone workbuilt in cement mortar or cement lime mortar incl all quoins, arches, pillars , etc. complete all as specified and directed. |
| 2 | M & L for brick work with sub class ‘B’bricks straight or curved on plan exc 6M mean radius built in CM 1:4 and all as specified and directed. |
| 3 | Demolition of reinforced cement conrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 4 | M & L precast cement concrete type B1 1:2:4 using 20 mm graded stone aggregate as in cover slabs for MH and drain etc set in cm (1:6). |
| 5 | M & L for TMT bars 8 mm dia & over cut to length bent to shape required incl cranking binding spirally for hooking for columns & bonding with MS wire (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 6 | Taking down cement plaster on brick or stone wall including racking out joints, hacking for key scrubbing down with water etc complete all as specified & directed. |
| 7 | M&L for rendering 10 mm thick in cement mortar (1:4) on any face of brick work or concrete surfaces and finished the surface even and smooth with using extra cement complete all specified and directed. |
| 8 | M&L for applying two coats of cement base painton new plastered surfaces of wall over a coat of primer complete all as specified and as directed. |
| 9 | M&L for perparation of old decorated surface of walls (plastered/unplastered) including cornices, pilasters etc by brooming down or steel wire brushing, scraping down smoke, soot moulds, moass and effloroscent salts trading oil and greasy spots and applying one coat of cement base paint on walls complete all as specified and directed. |
| 10 | Demolition of cement concrete (unreinforced) any description and in any position (Below or above ground leverl) not otherwise specifically provided for complete all as specified and directed. |
| 11 | M & L for cement concrete 1:4:8,75 mm thick type D-1,(using 40mmgraded stone aggregates),andlaid in as floor subbase finished fair and even without using extra cement complete all as specified and as directed. |
| 12 | M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:6for laying floor finishes complete all as specified and directed. |
| 13 | M&L for Chequered cement concrete tiles with grey cement and pigment of size 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed |
| 14 | M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.. |
| 15 | M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment, set, jointed complete all as specified and directed. |
| 16 | Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 17 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed. |
| 18 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, valley gutters fixed with self tapping screws all as specified and as directed. |
| 19 | M&L for fibre glass reinforced transculent seat 2mm thick of any colour fix witrh self taping screw complete all as specified and as directed |
| 20 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 21 | M&L for MS work as in roof trusses (framed) trussed, purlin, post, rafters including distant pieces, claeats includinjg cutting and welding required confirming to grade Fe-410-W(Gde-E-250) quality complete all as specified and as directed. |
| 22 | Dismantling post or struts (wood, steel or RCC) any section, including taking out embedded concrete portion and making good disturbed ground complete all as specified and as directed |
| 23 | Dismantling of Barbed wire fencing of any description and in any position complete all as specified and directed. |
| 24 | Excavation in post hole for similar holes each n exc 0.50Cum getting out returning filling in and ramming earth around in layers nexc 25 cm watering and removed surplus soil to a distance nexc 50m and making good surface in soft/loose soil. |
| 25 | S&F mild steel posts and struts in fencing including cuttingtops to shape as directed, drillingholes, notching for wire etc; flat iron fillets (for securing wire mesh/welded steel wire fabric etc) including all necessarydrilling, bolting or rivetingetc, andsimilar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 26 | M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass concrete complete all as specified |
| 27 | Supply only chainlink fencing any size any type etc complete all as specified and directed. |
| 28 | Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed. |
| 29 | S & F of mild steel screw bolt (machine made with hexagonal or square head at one end and screwed the other or screwed both ends each screw and to be fitted with washer and one hexagonal or square nut lengthof bolt n exc 5cm and dia of shank 5 to 10 cm complete all as specified and directed. |
| 30 | M & L for Mild steel bars 10mm dia and over,confirming to Fe-410-W (Gde.E-250) quality-A, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips or welding complete all as specified and as directed. |
