|
| 1 | Taking down copper /aluminium point wiring (light, fan, bell,socketor power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc.Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces ofwalls, floors etc complete all as directed at site. |
| 2 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as directed. |
| 3 | Taking down carefully copper/aluminium Sub main wiring of any size fromsurface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as directed. |
| 4 | Taking down ceiling fan /exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades complete all as specified and as directed and deposit to MES store yard of AGE E/M Dipatoli |
| 5 | M&L for point wiring with 1.5 Sq mmsingle corePVC insulated unsheathedcopper FRLSH multi stranded conductor cable in andincludingConcealed PVC conduitof sizenot less than 25mm ISImarked inclusive oftees ,bend ,elbows etc upto and including sunk in anodized pressed steel box and suitable size modular plate for fitting switch, socket etc complete including PVC insulated multi strandedcopper conductor 1.5Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminalincludingcutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- |
| 6 | (a) One light point controlled by one, one way switch 5 Amps |
| 7 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 8 | (c) One light point controlled by one, two way switch 5 Amps |
| 9 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 10 | (e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 11 | (f)One bell point controlled by one, bell switch 5 Amps |
| 12 | Description all as per item No 5 here in before butusing 2.5 sq mm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 13 | S & F for modular Switch flush type single pole 5/6 amp, two way single module230 Volts complete all as specified and directed at site. |
| 14 | S & F for modular Switch flush type single pole 5/6 amp, one way single module230 Volts complete all as specified and directed at site. |
| 15 | S & F for modular Switch flush type single pole 15/16 amp, 230 Volts complete all as specified and directed at site. |
| 16 | S & F for modular socket outlet 2/3 pin, 5/6 Amp (2 module) 230 Volts complete all as specified and directed at site. |
| 17 | S & F for modular socket outlet 2/3 pin, 06/16 Amp (2 module) 230 Volts complete all as specified and directed at site. |
| 18 | S & F for modular bell push 6 Amp, single module 230 Volts complete all as specified and directed at site. |
| 19 | S & F for Ceiling rose, surface Bakelite with 3 terminals PVC ISImarked for batten fitting complete all as specified |
| 20 | S & Ffor Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed |
| 21 | S & Ffor lamp holder , PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed. |
| 22 | S & F for sheet metal enclosure MCBDBTPN4 way Vertical type with 200 Amps rated bus bar 415 volts double door with push/slide locking system suitable for provision of incoming as 4P MCB and outgoing MCBs including filling any blank slot with blanking plates & necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 23 | S & FforMCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 24 | M & L forSub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etcone run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 25 | S & F for sheet metal enclosure MCBDBSPN8 way with 200 Amps rated bus bar 240 volts double door with push/slide locking system including filling any blank slot with blanking plates & necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 26 | S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 27 | S & Ffor MCB Single pole rated capacity 6 to 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 28 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 29 | S & F for Highly efficient LED Bulbs, 9 W, used as a ready replacement for existing old unsv bulb complete all as specified and directed |
| 30 | S & F forLED mirror light 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. |
| 31 | S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation andnecessary mounting arrangements, provision of newmultistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 32 | S & F wall mounted LED tube light fitting 20 watts natural white batten for surface mounted, polycarbonate body, high transmissitivity diffuser, high lumen ouput (>100 lm/w) box type fitting, IP-20 with min CRI >=80 and a 3.5 kV Surge Protection, 230 volts and intregrated electronic driverconnector block etcwith all accessories internally pre wired andnecessary mounting arrangements, including stamping with CA Number on each fitting with permanent marker & provision of new multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting including mentioning CA Number with permanent markercomplete all as specified and as directed. |
| 33 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired andnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
| 34 | S & F for energy efficient exhaust fan of 300 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan forconnection and making suitable size ofhole to existing brick wall for fan basecompelte all as specifiedand directed.(Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be includedin overall rate quoted). |
| 35 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm.completed all as directed |
| 36 | S&F in replacement sheet moulded compound (SMC) meter box fire retardant type of size not less than 600x500x150 mm to enclose 04 single phase electric meters with hinge type front operated door having transparent acrylic sheet & proper locking arrangement and flush mounting in wall incl taking down & refixing of serviceable elctric meter & making electric connections including cleaning of disturbed area and making good the disturbed surface and matching the existing specification complete all as directed by Engr-in-Charge. |
| 37 | Supply only Highly efficient LED Bulbs, 9 W, complete all as specified and directed |
| 38 | Supply only Highly efficient LED Bulbs, 12 W with inbuilt battery backup of min 04 hrs complete all as specified and directed |
| 39 | Supply only LED mirror light 10 watts batten polycarbonate body with decorative end caps complete all as specified and as directed. |
| 40 | Supply only wall mounted LED tube light fitting 20 watts natural white batten for surface mounted, polycarbonate body, high transmissitivity diffuser, high lumen ouput (>100 lm/w) box type fitting, IP-20 with min CRI >=80 and a 3.5 kV Surge Protection, 230 volts and intregrated electronic driverconnector block etcwith all accessories internally pre wired andnecessary mounting arrangements, including stamping with CA Number on each fitting with permanent marker complete all as specified and as directed. |
| 41 | Supply only wall mounted LED tube light fitting 20 watts warm white batten for surface mounted, polycarbonate body, high transmissitivity diffuser, high lumen ouput (>100 lm/w) box type fitting, IP-20 with min CRI >=80 and a 3.5 kV Surge Protection, 230 volts and intregrated electronic driverconnector block etcwith all accessories internally pre wired andnecessary mounting arrangements, including stamping with CA Number on each fitting with permanent marker complete all as specified and as directed. |
| 42 | Supply only Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired andnecessary mounting arrangements, including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
| 43 | Supply only Ultra slim LED ceiling light fitting 36watt 230 Volt with a high lumen efficacy of 80lm/W, made from extruded aluminium housing frame (recesss/pendant) 2\" x 2\"(ft) Complete with all accessories internally pre-wired, color temp range 3000 - 4000k complete all as specified and directed. |
| 44 | Supply only round/square Ultra slim LED ceiling light fitting 20 watt 230 Volt with a high lumen efficacy of 80lm/W, made from extruded aluminium housing frame (recesss/pendant) 0.9\" x 0.9\"(ft) Complete with all accessories internally pre-wired, color temp range 3000 - 4000k complete all as specified and directed. |
| 45 | Supply only round/square 12W Rimless LED polycarbonate surface panel light with a high lumen efficacy of 80lm/W, Wide voltage operation, up to 4.0 kV Surge Protection, color temp range 3000 - 4000k complete all as specified and directed. |
| 46 | Supply only round recessed LED ceiling light 6/10 watt with a high lumen efficacy of 80lm/W, built-in surge protection of 4KV, color temp range 3000 - 4000k complete all as specified and directed. |
| 47 | Supply only Decorative wall light fixture made up of Polycarbonate, suitable for 15W TU retrofit LED bulb (B-22 base) polycarbonate body, weather proof, environmental friendly, energy efficientcomplete with all accessories, prewired complete all as specified and directed. |
| 48 | Supply only Switch normal piano flush type 15 Amps, single pole, one way complete all as specified and directed. |
| 49 | Supply only Socket normal 15 Amps, 5 pin complete all as specified and directed. |
| 50 | Supply only 15A normal 5 pin S/S combination PVC body plate with 2 hole for screwing. |
| 51 | Supply only 15A normal 5 pin S/S combination PVC body plate with 4 hole for screwing. |
| 52 | Supply only Polycarbonate Modular AC Box with 20 to 32Amps Single Pole MCB, enclosure and Heavy Duty ISI Plug Top (White) with indicator and connecting complete all as specified and directed. |
| 53 | Supply only ISI marked Polycarbonate Modular AC 6A 3Pin Flat Plugtop with Indicator, white in colour and connecting complete all as specified and directed. |
| 54 | Supply only ISI marked Polycarbonate Modular AC 16A 3Pin Flat Plugtop with Indicator, white in colour and connecting complete all as specified and directed. |
| 55 | Supply only 2.5 sqmm, FRLSH Copper Wire for Electrical Uses ISI Mark, PVC insulation cover. |
| 56 | Supply only 6 module wall mounted switch board, white color modular gang box with 1, 16A switch & 5 pin socket, 1, 6A switch & 5 pin socket. All as specified & directed by Engineer-in-Charge. |
| 57 | Supply only ivory white ISI marked, PVC electrical trunking 25 x 16 mm, tensile strength 390-420 kg/cm, SG 1.3 - 1.4, Hardness 70-75D. All as specified & directed by Engineer-in-Charge. |
| 58 | Supply only ISI marked, MS anchor fastner not less than 80mm long & 10sqmm cross section suitable for holding geyser/AC. All as specified & directed by Engineer-in-Charge. |
| 59 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 |
