|
| 1 | Taking down cement plaster on brick work of any description incl racking out joints and cleaning dust etc including removing rubbish material complete all as specified. |
| 2 | M&L for rendering 15mm thick in CM 1:6 on brick or concrete surface finished evenwithout using extra cement, complete all as specified and directed. |
| 3 | M&L for 15 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm& 5mm) mixed with water proofing compound in top layer 200 ml per beg of cement or as per manufacturer\"s instructions finishing the surface fair and even without using extra cement complete all as specified and as directed.Note:- WPC will be measured and paid separately |
| 4 | Supply only liquid water proofing compound etc complete all as specified |
| 5 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished evenwithout using extra cement complete all as specified and directed. |
| 6 | M&L forpreparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash/ colour wash including washing froors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed. |
| 7 | M&Lfor preparation of old treated surface of ceiling by brooming down or steel wire brushing; scrapping down smoke root, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat ofwhite wash / colour wash on old decorated surfaces of ceiling including washing froors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes completeall as specified and directed. |
| 8 | M&L for waterproof cement based puttyand sand papering surcaces to achieve smooth surfaces over new plastered surface on wall / ceiling / chajjas after preparation of surfaceand applying two coats of distemper acrylic emulsion of approved tint over a coat of alkaline resistant primer with rollerincluding washing froors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed by GE / Engineer-in-Charge. |
| 9 | M&Lfor complete removal ofexisting treatment from olddecorated plastered surfaces of wall, removal of nails etc & filling crack/holes with putty, applying wall care putty as required and applying one coat of exteror acrylic emulsion antifungalpaint on external surface of wall/chajja/facias by auto roller over a coat of primer complete all as specified and directed as per manufacturers instruction. |
| 10 | M&L forpreparation of new plastered surfaces on wall / ceiling / chajjas and applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Ltre/10 Sqm over and including priiming coat of exterior primer applied @ 0.90 litre/10 Sqm over new/old surfaces as per the manufacturer instruction and .Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed by GE / Engineer-in-Charge. |
| 11 | M&L for complete removal of existing treatment and preparation of old surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 12 | M&L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamelled paint including washing froors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed. |
| 13 | M&L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint including washing froors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed. |
| 14 | Taking down chowkaths or frames n.exc 1.5 sqm (without takingoff shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified. |
| 15 | Taking down chowkaths or frames Exc 1.5 sqm but n.exc 4 sqm(without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified. |
| 16 | S&F ofSolid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 17 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS complete all as Specified.Note:- The manufacturing test certificate (MTC) is to be provided and authantication certificate/ Logo/ hologram/ barcode of the make/manufacturer must be there on the product. |
| 18 | M&L for providing & fixing factory made solid PVC cup board frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5 mm thick prelam/plain colour PVC sheet reinforce with 19mm x 19mm MS square tube of 19 gaugethickness throughout the frame and metre cut at two cornersand jointed with 2 nos of 150mm long brackets of 15mm x 15mm MS square tubes.The door frame shall be fixed to the wall using 100mm long MS screws through the frame by using PVC fasteners. A minium 4 nos of screws to be provided for each vertical memberand minium 2 nos of screws to be provided to the horizontal mmember etc.complete all as specified and dir by Engineer in charge. |
| 19 | M&L for providing & fixing factory made solid PVC cup board shutter (Flush type) of 24 mm thick made from co-extruded 3 layer regid PVC foam sheet (single extruded) with density not less than 600kg/cbm outer layer (.8-1mm) thick should be of rigid PVC with density of not less than 1400kg/cbm manufactured byan ISO 9001-2015 certfied company. Door should be water proof, turmite proof, fire retardantand having good screw holding capacity complete all as specified and directed. |
| 20 | M&L in repair for providing and fixing factory made PVC shelf/partitation of required size consisting of 20mm thick solid PVCsandwich panel with 1mm thick plain PVC sheet on both sides suitably fixed incomplete all as specified and directed |
| 21 | Refixing of shutter exc 1 Sqm but n. exc 2 Sqm after necessary repairs in the same opening incl taking down complete all as specified and as directed. |
| 22 | S&Ffor 100 mm Hasp and staple, safety type, aluminium anodisedwith mild steel hinge pin including bolt to hinge plateand fixed with screws complete |
| 23 | S&F of Stainless steelbutt hinges, medium weight of size 100mm complete all as specified and as directed. |
| 24 | Supply & fixing aluminium anodised extruded fabricatedtype handle 150mm long complete all as specified. |
| 25 | S&F 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified . |
| 26 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) area not exceeding 2.00 sqm each all as specified as directed. |
| 27 | S&F factory made pre laminated 18mm thick lead free 100% solid WPC (wood polymer composite) sheet one side prelam sheet and other side wood nature colour for shutter having high natural fiber content 25 to 30% wood colour sheet with density not less than 600kg/Cum and WPC to be laminated with PVC foil of min 14 micronthick of approved design incl 100% termite/water proof,fire retardant, Eco friendly an finish at all edges at level of making edges lipping using biding tape etc as in kitchen cupboard, cabinet etc complete as per direction of Engineer In Charge and manufactureres specification all as specified as directed by Engineer In Charge. |
| 28 | S&F Powder coatedaluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.25kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazingcleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed. |
| 29 | S&F Powder coated aluminium louvered ventilators of size n exc 0.50 Sqm area with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazingcleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangementsincluding taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed. |
| 30 | S&F box type mild steel window glazed/gauzed incl frame made of hollow section 60x25x1.25 mmthick 50mm x 20mm x 1.25mm thick MS hollow pipes as in windows shutter with or without sash bar incl 150mm size MS tower bolts 2 Nos each leaf, MS handle made of Z section 100 mm long 2 Nos each leaf,mild steel cheat 55 mm x25mmx75mm long 2 Nos each leaf,mild steel cleat 55 mmx25mmx75mm long,MS pintel hing 75 mm long 14 mm dia 02 Nos each leafcomplete all as specified and as directed. |
| 31 | M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; fixed type window frame , door chowkath,framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including primer complete all as specified and directed. |
| 32 | Dismantling expanded metal,(weight n exc 4.00 kg/Sqm) any thickness or mesh, fixed with steel or wood fillets, if any |
| 33 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 34 | S&F Expanded metal, (weight n exc 4.00 kg per Sqm) cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed. |
| 35 | M&L for preparation of new of previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 36 | Hacking out oldbroken glass (any thickness, size , quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips, nut bolts & filletsat ht upto 15 metres complete all as specified and directed. |
| 37 | S&F Rough cast, wired glass 6.00 to 6.40 mm thick secured with approved mild steel beading, screws/nut and bolts to Flat Iron or angle iron frame area of each glass pan n.exc 1.25 sqm working height upto 15 mtr complete all as specified and directed. Note:- Rate to be coated including beading and all fixing materials except frame work |
| 38 | S&F sheet glass ordinary quality, 4 mm thick and glazing with oil putty in square n.exc. 0.5 Sqm in each pane at ht upto 15 metres complete all as specified and directed. |
| 39 | Supply & fixing 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified |
| 40 | M&L for PCCtype C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete inframe filling , gaps in between glazed & fly proof steel window, cills, railling up to 60 cm in height etc including necessary form work as required all complete all as specified |
| 41 | S&F in repair stainles steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified |
| 42 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including taking downcement plaster complete all as specified . |
| 43 | M&L for 15 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4)including rounding the exposed surfaces of granite complete all as specified. |
| 44 | M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and directed. |
| 45 | M&L Glazed ceramic coloured tiles/digital elevation tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed white or colour cement to match as specified as diracted. |
| 46 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces to recive a wall tiles using cement morter 1:4as specified as directed. |
| 47 | S&Fforcoloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors/skirting etc set and jointed in neat cement slurryover 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to matchcomplete all as specified and as directed |
| 48 | M&L for providing25 mm thick cement concrete 1:2:4 type B-0using12.5 mm graded crushed stone aggregates as in leveling course of floor rough surface to receive floor tiles complete all as specified. |
| 49 | Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed. |
| 50 | M&L for brick works withsub class \"B\" bricksstraight or curved on plain exc 6 m mean radius built in cement mortar 1:6 complete as directed. |
| 51 | Description all as per Item No. 47 above but without bricks complete all as Specified. |
| 52 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm bore |
| 53 | S&F of Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete. |
| 54 | Refixing of old steel tubing and conections in new or old position (wall, ceiling, floors, etc) of 15 mm bore |
| 55 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls |
| 56 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm bore |
| 57 | S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete. |
| 58 | Refixing of old steel tubing and conections in new or old position (wall, ceiling, floors, etc) of 20 mm bore |
| 59 | S&F in repairs Bib taps fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected. |
| 60 | S&F in repair concealed stop cock CP, cast copper alloy fancy type with long shank and cup for 15mm pipe. |
| 61 | S&F in repair 15 mm diabrass chromium plated angle cock |
| 62 | S&F in repairfancytype pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore. |
| 63 | Supply and fixing in repair for 15mm bore brass chromium plated fancy type long body bib cock with wall flange fixed complete all as specified and directed . |
| 64 | Supply and fixing for brass chromium plated fancy type towel ring square fixedetc complete. |
| 65 | S&F for brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges. |
| 66 | S&F in repair 15mm bore Swivel shower of CPfixing with 15mm pipe. (Minimum weight 40gms) |
| 67 | S&F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm sizeincluding CP waste coupling, PVC connection 450 mm long,waste pipe & removing the existing Basin, cutting for and pinning ends of brackets or erecting stand etc complete all as specified. |
| 68 | S&F in repairs 15 mm bore pillar taps, capstan head, cast Copper alloy,chromium plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 69 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm |
| 70 | S&F in repair 600mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 71 | S&F vitreous chinasquatting pan\"Orissa\" pattern size 580x440mm white with intgeral foot rests(excluding flushing cistern and flush pipe) with \"P\" or \"S\" trap fron or back inlet etc including connection to trap tand flushing pipe and provision of lime concrete bedding complete all as specified and as directed in repairs including demolition of existing one |
| 72 | S&F in repair 10 ltr capacity PVC flushing cistern low level white colour incl PVC connection 450 mm long, PVC flush pipe of reqd length etc complete all as specified and directed |
| 73 | S&F in repairs vitreous china wash down water closet pedstal pattern white excluding fixing bolts, flushing cistern and flush pipe complete but including PVC seat cover with aluminium/PVC hinging devices & EWC Jet chromium plated with 1.00 mtr long PVC connection pipe etc complete all as specified. |
| 74 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitale for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including makig connections and fixed in position complete in all respect as specified |
| 75 | S&F in repairgrating doom 125mm dia with or Without waste hole of PTMT (min wt 40 gms) |
| 76 | S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement |
| 77 | Taking down PVC pipe incl all fittings complete |
| 78 | S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall. |
| 79 | S&F 110mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed |
| 80 | S&F 110mm dia PVC (SWR) junction single \"T\" equal or unequal with access door Complete all as specified and as directed. |
| 81 | S&F 110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal Complete all as specified and as directed. |
| 82 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 83 | M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Fins, fascias, louvres, parapets, and railings , newels, balustrade & the like |
| 84 | Formwork to fins, louvers, fascia. etc Fair finished surfaces of concrete flat |
| 85 | M&L Mild steel TMT bars 6mm to 10mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality. |
| 86 | S&F in repair1.00 mm thick stainless steel plate rack of size 31\"x30\"x10\" complete all as specified and directed. |
| 87 | S&Fin repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantileverbrackets and connecting union to pipe overall size 915mm x 460mmbowl size 410mm x 330mm x 160mm all as specified and as directed. |
| 88 | S&F in repair for 15mm bore brass chromium plated fancy type long body bib cock with wall flange fixed complete all as specified and directed . |
| 89 | M&L for water proofing treatment to sunken floor with the following course of treatment/ specification:(i) Cleaning top surface of floors /slabs and laying 50 mm thick (avg) PCC of grade M10 (Nominal mix) , mixed with WPC as per manufactrrer\"s instruction laid in slope 1:20 towards spouts including coveting corners(ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as pe rmanufacturer\"s instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed wth acrylic based polymer modified cementious compound @ 0.253 kg /sqm This layer shall be allowed to air cured for 4 hrs . (iv) applying 2nd layer of slurry @ 0.242 kg/sqm mixed with accrylic based polymer modified cementenous compound @ 0.126 kg/sqm.This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs.(v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces (vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron measured dry on dry surface over a coat of PU primer including preparation. (Make of PU primer - Dek guard EP -302 of M/S Fosroc or equivalant approved brand.Make of PU paint - Dek guard PU or equivalant approved brand. (vii) 2 Nos 32mm bore GI medium grade 450mm long spout ,to be provided through external wall to drainout accumulated water.(vii)Sunken floor shall be tested for water tighness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists (ix) Sunken portion shall be filled with lean concrete of grade M7.5 stone agreegate |
| 90 | Demolition of cement concrete (un-reinforced ) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) all as specified and as directed. |
| 91 | M&L for PCC (1:3:6) Type C-2 (20 mm graded aggregate) as in plinth protection/hard standing incl finishing the concrete surface even and smooth w/o using extra cement complete all as specified.Note:- The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 50 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume of plinth protection) |
| 92 | M&Lfor 75 mm thickcement concrete 1:3:6type C-2 (using 40 mm graded stone aggregate) as in path/stepslaid with and incl use and waste of form workand finishing the surface even and rough to receivethe topping layer ortiling,etc complete . |
| 93 | Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 94 | S&F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section ,Tube etc), including distance pieces, cleats etc. confirming to Fe - 410- W including cutting, welding & necessary fittings such as nut bolt, plate etc. complete all as specified and directed. |
| 95 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings . |
| 96 | S&F forPre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
