|
| 1 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) |
| 2 | M&L Hardcore of gauge n exc. 63 mm broken stone or boulders , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all specified and directed |
| 3 | M & L75mm thick cement concrete type C2 (1:3:6)using (40mmgraded aggr.) as in sub base complete all specified and directed |
| 4 | M&L for 20mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all specified and directed. |
| 5 | M&L for Chequered cement concrete tiles 300x300x25mm etc. setand jointed and pointed in neat cement slurry in floor with grey cement and pigment all as directed. |
| 6 | M&L for 75mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protectionsurfacefinished even and smooth using with extra cement complete all specified and directed. |
| 7 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound with Grade A Bitumen complete all specified and directed |
| 8 | M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade A complete all specified and directed |
| 9 | M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth using extra cement all as specified |
| 10 | M&L for 100mm thickCement concrete 1:2:4 type B-2using 40mm grade stone aggregate laid on floor, complete all as specified and directed. |
| 11 | S&F Glass dividing strips, 3 mm thick,38mm width and inserted in position to confirm to design. |
| 12 | M&L for PCC Type B1(1:2:4 ) using 20mm grade stone aggregatein roof kerbs or mud stops, rounded or chamfered on edges complete all specified and directed. |
| 13 | Demolition ofreinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 14 | M&L for PCC 1:4:8 type D2 using 40mm graded agg as in fdn filling and mass concrete complete all specified and directed. |
| 15 | S&F Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all specified and directed. |
| 16 | S&F Formwork to sides of pillars, posts, struts, piers, columns, and stanchions |
| 17 | M&L in mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all specified and directed. |
| 18 | Ditto same as item No 17 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binder complete all specified and directed. |
| 19 | M&L RCC nominal mix 1:2:4 Type B1 (20mm graded aggregate) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all specified and directed. |
| 20 | M&L RCC 1:2:4 using type B1 (20mm graded aggregate) as in Columns, pillars, piers, posts and struts complete all specified and directed. |
| 21 | M&L for providig precast cement concrete in cover slabs using type B1 1:2:4 (20mm graded aggr) & setting in CM 1:6 complete all specified and directed. |
| 22 | M&L for fair finished flat form work to soffits of slab, n exc 200mm thick and similar items including edges complete all specified and directed. |
| 23 | M&L for Reinforced Cement Concrete Type B1, 1:2:4 (using 20 mm graded granite stone aggregate) for slabs suspended on walls, beams and columns, in floors, roofs, landings and in shelves and the like complete all specified and directed. |
| 24 | Material and labour for 15mm thick rendering in cement mortar (1:4) on brick or concrete surfaces complete all specified and directed. |
| 25 | M&L Preparing new plastered surfaces and applying Two coats of cement base paint over a coat of white wash on surfaces of walls on plastered surfaces complete all specified and directed. |
| 26 | M&L for Plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregates in surface channel, bed of drains incl form work / moulds complete all as directed. |
| 27 | M&L Extra for fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds etc. |
| 28 | Taking down cement plaster on stone , brick, concrete block wall or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. |
| 29 | M&L rendering 15mm thick in CM 1:4on concrete surfaces finished even and smooth with neeru finish using extra cement complete all specified and directed. |
| 30 | M&L 15 mm thick plaster in CM 1:3 on fair faces of brick work and concrete sufacesfinished rough to receive granite for wall |
| 31 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all specified and directed. |
| 32 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tilesand rubbish off the premises. |
| 33 | Material and labour for 350x 250x7mm or 450x350x7mm thick glazed ceramic tiles coloured set and jointed in neat cement slurry and pointed in coloured cement over and including 10mm thick rendering with CM 1:6 on fair faces of brick work or concrete surfaces as in dado of bathroom, toilet and kitchen all as specified. |
| 34 | M&L for Non - skid white Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:4 complete all as specified and directed |
| 35 | Dimolition of brick and stone masonry of any description in CM |
| 36 | M&L forPre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete type B-1 1:2:4(20mm graded agg)set in CM (1:4) comlete all as secified and directed by Engr-In-Charge. |
| 37 | M&L Rendering 15 mm thick on brick or concrete block masonry in CM 1:6 complete all specified and neeru finish in Drains complete all specified and directed |
| 38 | M&L for Reinforced concrete pipes, class NP2, 900mm dialaid and jointed complete with collars complete all specified and directed. |
| 39 | M&L for Reinforced concrete pipes, class NP2, 450mm dialaid and jointed complete with collars complete all specified and directed. |
| 40 | M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 450 mm bore pipe complete all as specified and directed |
| 41 | Demolition of Concrete (unreinforced)in ground floors and pavings n exc 15 cm thickness(below or above ground level)complete all as secified and directed. |
| 42 | M&L for Laying and compacting 150mm thick Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber as specified. |
| 43 | M&L for Laying and compacting in 2 layers of 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mmsize) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradientand camber required Granite,trap or Basalt as specified. |
| 44 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100mm thickness M-50 Grade with grey cement andpigment complete all as secified and directed by Engr-In-Charge. |
| 45 | M&L for Cement Concrete in foundations,filling and mass concrete type C-2, 1:3:6 (40mm graded aggregate) as in base course complete all as secified and directed. |
| 46 | M & L for 75mm thick Cementconcrete type B-1, 1:2:4 (20mm graded aggregate) complete all specified and directed. |
| 47 | M&L for 60mm thick Machine pressed precast concrete interlocking paver block with grey cement and no pigmentany shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all specified and directed. |
| 48 | M&L for Sand filling under floors or in foundations including watering and consolidationcomplete all specified and directed. |
| 49 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
