|
| 1 | Surface excavation not excluding 30 cm deep and averaging 15 deep and getting out in soft/loose soil. Complete all as specified and directed. |
| 2 | Excavating in trenches, not excluding 1.5 m wide and not exculding1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not excluding 10 sqm on plan and n exc 1.5 m in depth and getting out. Complete all as specified and directed. |
| 3 | M&L for Cement concrete (1:4:8) type D2 using 40mm graded stone aggregate asin foundations, filling and mass-concrete complete all as specified and directed. |
| 4 | Removing excavated material not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thickc omplete all as specified and directed. |
| 6 | M&L for brick work with Fly ash brick (using old size bricks)straight or curved on plain exc 6m mean radious built in CM (1:6) complete all as specified and directed. |
| 7 | M&L for PCC (1:2:4) type B1 using 20mm graded aggregate as in coping including necessaryform work complete all as specified and directed. |
| 8 | M&L for rendering 15 mm thick in CM (1:4) on faces of brick or concrete surfaces and finishing fair and even complete all as specified and directed. |
| 9 | M & L for 1mm thick average wall care putty on wall complete all as specified and directed. |
| 10 | M&L for finishing wall with Acrylic smooth exterior paint of required shed on new surfaces (Two or more coats applied @ 3.28 ltr/10Sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10Sqm complete all as specified and directed. |
| 11 | M & L for reinforced cement concrete (Nominal Mix) 1:2:4 using 20mm graded stone aggregate as in footing, walls,beams and columns,roof projections ,canopies and shelves including necessay form work etc completeall as specified and directed. |
| 12 | M&L for TMT bars 10mm dia and over as in reinforcement cut to length bent to shape required including cranking, hooking ends and binded with steel wire (annealed) not less than 0.9mm dia ro secruing with clips confirming to Fe-410-0 or Fe-310-0 complete all as directed. |
| 13 | Ditto all as per item No 12 above but for 8mm dia confirming to Fe-410-0 or Fe-310-0 for stirrups complete all as directed. |
| 14 | M&L for swimming pool tiles (Joint free, Pool tiles) of size 247mm x 122mm x 8mm thick over High performance epoxy Grout as per manufactures instruction and pointed in white or coloured epoxy Grout to match the floor, they are heat proof water proof, UV stabilized complete all as specified and directed. (Make:- ENDURA JOHNSON, BRAND/ Somany/ Kajaria/ Nitco Tiles. |
| 15 | Ditto all as per item No-14 above but on wall surfaces over High performance epoxy Grout as per manufactures instruction and pointed in white or coloured epoxy Grout complete all as specified and directed. |
| 16 | S&F Vitrified Outdoor Coloured tiles of 9-10 mm thick (square/rectangular) polished , area of each tiles excluding 0.09 sqm but not exclding 0.16 sqm each in floors etc. set and jointed in cement slurryand pointed in white cement with pigment to match the colour of tiles over and including 15mm thick screed bed in CM (1:6) complete. |
| 17 | Taking up or down GI tubing including GI fittings complete from trench/wall/ceiling/floor suitable for 20 mm dia pipe, complete all as specified and as directed. |
| 18 | Taking up or down GI tubing including GI fittings complete from trench/wall/ceiling/floor suitable for 25 mm dia pipe, complete all as specified and as directed. |
| 19 | Taking up or down GI tubing including GI fittings complete from trench/wall/ceiling/floor suitable for 40/50 mm dia pipe, complete all as specified and as directed. |
| 20 | Taking up or down GI/CI/DI pipe of size, 150/100/80 mm dia and connections complete all as directed. |
| 21 | M&L for GI tubing 100 mm dia bore medium grade with all fitting laidin trench or fix on wall/floor and connection complete all as specified and directed. |
| 22 | Dittoall as per item No 21 above but 80 mm dia bore. |
| 23 | Dittoall as per item No 21 here-in-before but for 50 mm dia bore |
| 24 | Dittoall as per item No 21 here-in-before but for 40 mm dia bore |
| 25 | Ditto all as per item No 21 here-in-before but for 25 mm dia bore |
| 26 | Dittoall as per item No 21 here-in-before but for 20 mm dia bore |
| 27 | S&F in repair cast iron pipes both ends spigot and socket ends/ screwed flanged in any length for 100 mm dia bore sizes complete all as specified and directed. |
| 28 | S&F & testing DI/CIFittings any size, such as bends(any type, radius & angle) tappers any type (Straight, bend, increasing, decreasing or double socket or both end flanged etc) Tee pieces, single branch \"Y\" junction double branch, cross (all socket or spigot & socket or both end flanged), collars, caps, connecting piece and plugs etc complete all as specified and directed. |
| 29 | M&L for cutting cast iron pipes in position for insertion of new tee, collars or any other special complete all as specified and directed. |
| 30 | S & F cast iron sluice valve of size 150 mm dia, with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts and washers of required size and Nos, complete including removing of old unserviceable one, complete all as specified and directed. |
| 31 | Ditto all as per item No.30 here in before but for size 100 mm dia. |
| 32 | Ditto all as per item No.30 here in before but for size 80 mm dia. |
| 33 | S&F in repair Gun metal, globe or gate valve 15 mm bore with iron hand wheel head , screwed both ends for iron pipes complete all as specified and directed. |
| 34 | Ditto all as per item No. 33here in before but for size 20 mm. |
| 35 | Ditto all as per item No. 33 here in before but for size 25 mm. |
| 36 | Ditto all as per item No. 33 here in before but for size 40 mm. |
| 37 | Ditto all as per item No. 33 here in before but for size 50 mm. |
| 38 | M & L for taking out / lifting from bore wellsubmersible pump set of 25 HP capacityfrom bore well and depositing to E/M store including columnpipeand connection cable, fitting through providing tripod assembly with chain pulley in different location of bore welland dismantling of cable, pumpset etc complete all as specified and directed. |
| 39 | Supply, installation lowering in borewell alongwith existing serviceable column pipe against Item No 25 & replacement against old unsv column pipe 100 mm dia received from Items given here-in-before and jointing cable & loweing), testing and commissioning multi stagesubmersible pumping set having discharge capcity minimum 1000 LPM at 70 mtr head driven by three phase 415 Volt electric motor of capacity not less than 25 HP with stainless steel shaft and impeller etc complete all as specified and directed. Make : Crompton Greaves/ KSB/Kirloskar. Note:- Replacement against old unsv column pipe 100 mm dia shall be measured and paid separately as supply only. |
| 40 | Supply and(to be lowered under item No 39) MS column pipe of size 100 mm dia class \"C\"6 mtr long, both end flanged heavy duty screwed and welded complete all as specified and directed. |
| 41 | S&F PVC insulated and PVC sheathed multi stranded copper conductor cable for submersible pump set, conforming to IS-864 of size 3 core 10 Sqmm, 1100 Volts grade, including necessary water proof joints to submersible pump at cable lead complete all as specified and directed. Make : Finolex/Gloster/ Havells/ Plaza. |
| 42 | S&F Electronically fully Automatic star delta starter complete fitted in sheet metal enclosure with Voltmeter and Ammeter, MCCB/ MCB 4 Pole, contactor etc for 25-30 HP three phase submersible pumpset including necessary connections and arrangements complete all as specified and directed. Make : Havells/ C&S/ L&T/ Seimens. |
| 43 | S&F new chemical dosing pump high pressure single head gear motorized adjustable dosing pump of following specifications:- (a) Adjustable High pressure 0 to 100 PSI (b) Power 230 Volts, 50 Hz (c) RPM-44 minimum (d) Horse power-1/30 (e) Output 2 US GPD to 40US GPD including 100 ltr FRP tank with electric driven agitator, tubing, connctions, nuts, injection check valve etc, connected accessories as per manufacturers instructions complete all as specified and directed. |
| 44 | M&L for construction ofold broken brick masonary Valve pit Chamber with PCC (1:3:6) type C1 using 20mm graded stone aggregate as in foundation and full brick wall of size 1500mm x 1500mm x 900mm internal dimension), 1.5mm thickMS cover with locking arrangement, welded on angle iron frame of size 40mm x40mm x 6mm, embeded on top of valve chamber, including. and painted with two coats of synthetic enamel paint over a coat of red-oxide primer, including. necessary earth work etc,complete all as specified and directed. |
| 45 | Supply,installation, testing and commissioning of uninterrupted power supply (UPS) 15 KVA capacity suitable for input voltage 340 to 450 Volts, AC 3 phase, 50 Hz and output voltage 230 Volt + 1% volt AC single phase sine waveform and recovery time less than 25 mili sec with IP55 protected enclosure with facility programmable controller for output voltage, frequency adjustment overload setting and also having protection for input over / under voltage, input phase fails, over load temperature, fuse for semi conductor devices, high speed electronic fuse less tripping for output short circuit, snubber circuit for power devices, indication for input on, output on over/under voltage, over load and over heat with and including SMF battery bank ofsuitable rating andquantity for 30 minutes backup with suitable battery rack including connecting with required accessories complete all as specified and directed.Make : Microtek/ V-Gaurd/Ku-Kam/ Luminous Power Tech |
| 46 | Supply,installation, commissioning and testingof voltage stabilizer for automatic operation servo controlled (conforming as per BIS 9815 Part I:1994 reaffirmed 2009) with solid state sensor unit (IC base) relay for smooth and silent operation with servomotor and copper wound transformer in CGRO lamination and suitable for lamination and suitable for three phase system unbalanced load,oil cooled indoor type 75 KVA capacity designed for rated input voltage 360 volt to 480 volt and output voltage 415 + 1% without spines and distortion in waveform at 50 Hz, +3Hz with minimum speed of correction 20 volts phase to phase by stepless correction method (using auto variable transformer) per second including with facility MCCB of suitable rating minimum 160 Amps capacity 4 pole 415 volts 16 KA internal magnetic release Dpx model of make Legrand or equivalent model of other make as specified as incoming control, auto/ manual selector switch, separate digital voltmeter for output and input voltage to read phase and line voltage, over and under voltage cut off, push button and toggle switch for raise/ lower control of output voltage including first filing transformer oil, (IS 335 : 1993) reaffirmed 2005) indicator lamp to indicate any alarm complete including 70 sqmm x 3.5C cable for incoming and outgoing appx 20 mtr all as specified and directed. Make : Volina/Sai Electrical/ AE/Aplab/Andrule/ Brentford/ Sinetrac).Make : Volina/ Vintec/ ITE/ V-Gaurd |
