|
| 1 | Excavation in trenches not exceeding 1.5 m wide and not exceeding1.5 m in depthfor laying cables, foundation for pole, etcand getting out inhard/dense soil complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming of soil in layers n. exc 25cm thick complete all as specified and as directed. |
| 3 | Removing excavated soil to distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and as directed. |
| 4 | M&L for PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed. |
| 5 | M&L for RCC 1:1.5:3, type B1 (using 20mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. complete all as specified and as directed.Note for item No. 5 to 6 : Reinforement shall be measured and paid separately under relevant item of this schedule. |
| 6 | M&L for RCC 1:1.5:3, type B1 (using 20mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts, complete all as specified and as directed. |
| 7 | Formwork to rough finished surface sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 8 | Formwork to rough finished surface sides of concrete of pillars,posts, struts, piers, columns and stanchions complete all as specified and as directed. |
| 9 | M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cutting, bending cranking, hooking end and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed. |
| 10 | All as per item No 09 above but 8mm dia bars using for stirrups complete all as specified and as directed. |
| 11 | S&F rolled mild steel, Fe 410-W (Gde E-250) quality - A, framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides)and hanging; also fasteningt, complete all as specified and directed. |
| 12 | S&F rolled mild steel, Fe 410-W (Gde E-250) quality - A,Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required:hooks (stay), heavy, for largegates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee pieceinserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed. |
| 13 | M & L for preparation of new steel surface over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 14 | M&L 20mm granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and includingscreed bed of 15 mm thick in cement mortar (1:4) completeall as specified and as directed. |
| 15 | S & F GI tubing 25mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floorscomplete all as specified and as directed. |
| 16 | S&Fceiling fan 1200mm sweep, 230V, 5 star rated energy efficient along with all accessories including electronic fan regulator step type(motor winding with copper coils) with all conncections, complete all as specified and as directed.Make Havells ,Model FHCEF5SWHT48/Usha/Crompton Greaves |
| 17 | S&F electric water heater, anti corrossion ABS body,high grade heating element, single weld line on inner tank reduces water leakage risk,storage tankmade of steeless steelbody with glassline enamel coating increase the life the life of the element and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such , including cutting, threading and joining etc., with all conncections, complete all as specified and as directed.Make Havells ,Model GHWAHPSWH025/Usha/Crompton Greaves |
| 18 | S&F electric water heater, anti corrossion ABS body,high grade heating element, single weld line on inner tank reduces water leakage risk,storage tankmade of steeless steelbody with glassline enamel coating increase the life the life of the element and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such , including cutting, threading and joining etc., with all conncections, complete all as specified and as directed.Make Havells ,Model GHWAHPSWH050/Usha/Crompton Greaves |
