|
| 1 | Scarifying or picking graveled macadam or bituminous macadam surface in area exc 400 Sqm depth exc 50 mm and n.exc 100 mm deep and removing n.exc 50 mtr and stacking complete all as specified and as directed |
| 2 | M&L Soling 75mm ( or sub base) Thick with broken boulders or quarried stone, interstices filled, surface formed and rolling and consolidating formation surfaces in using Exc. 8 tonne & not exc. 12 tonne power roller required gradient and chamber |
| 3 | M&L for 7.5 cm thick (compacted thickness) WBM with coarse aggregateof granite trap or basalt grading 2 (63 to 40mm) or of grading 3 (50 to 20mm) spread, rolled and consolidated to gradient material and camber required with 8 to 12 tonne power roller complete all as specified and as directed. |
| 4 | -ditto- all as per item No 3 but except material. (Material obtained from SI No 01 shall be used) |
| 5 | M&L for preparing unsurfaced WBM by brushing caked mud etc sweeping with brooms and finally faning with wire brushes for removing the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed. |
| 6 | M&L for applying evenly a tack coat of paving bitumnous primer at 10 Kg per 10 Sqm usingbitumen VG - 10 complete all as specified and as directed. |
| 7 | Repairs to pot holes any depth exceeding 30mm depth, area not exc 1sqm each including sweeping free from dust & mud or water scoring sunken surfaces in roads paths etc, cutting around edges to at least 25mm in depth making good by applyingtack coat withcutback bitumen@ 5kg/10 sqm putting in pre mixed bituminous macadam, well rammed and sealed with binder 9.8 kg/10 sqm, blinded with 0.09 cum of stone chipping ,6.3 mm size and again well rammed (including supply of premixed macadam binder and chippings) depth of pot holes exe 30 mmcomplete all as specified and as directed by Engr-in-Charge |
| 8 | M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally faning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed by Engr-in-Charge. |
| 9 | M&L for applying evenly a tack coat of bitumnous primer at 5 Kg per 10 Sqm using cutback bitumen VG - 10 complete all as specified and as directed by Engr-in-Charge. |
| 10 | M&L for providingbituminious premix asphaltic semi dense concrete (30mm thick) consolidated thickness with 5.5% binder content by wight of total mix , with using paving bitumen VG-30 laid / spread uniformly by means of Mechanical pavers over primed black top surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and as directed by Engineer-in-charge. |
| 11 | M&L for premix bituminous macadam laid/rolled and compacted to required gradient and camber and (consolidated thickness 75mm or less) using 4% paving bitumen by means of mechanical paver by weight or total mix complete all as specified and as directed by Engr-in-Charge. |
| 12 | M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n.exc 10cm wide on roads pavements with hot allied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction incl taking down existing complete all as specified and as directed by Engr-in-Charge. |
| 13 | Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructionsincl taking down existing complete all as specified and as directed by Engr-in-Charge. |
| 14 | Supply and fixing in rep metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 incl taking down existing complete all as specified and as directed by Engr-in-Charge. |
| 15 | Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcdcompleted as per manufactures instructions etc. incl taking down existing all as specified and as directed by Engr-in-Charge. |
| 16 | Dismantling of stone sett paving of any description or thickness in kerb etc laid bedded and pointed in any mortar complete all as specified and as directed by Engr-in-Charge. |
| 17 | M&L for Stone kerb (sand stone) of roughly squared stones of size 15cm x 30cm, all surfaces hammer dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 20mm jointed in cement mortar 1:6 and struck flush incl necessary excavation, earth work, returning filling and removal all as specified and as directed by Engr-in-Charge. |
| 18 | M&L for surface dressing n.exc 15cm deep, site clearance, to remove the bushes and making area worable etc all as specified and as directed. |
| 19 | M&L for 100mm thickMoorum/red bajri,Spread,rolled and consolidated to gradient and camber required and complete all as specified and as directed by Engr-in-Charge. (Rate quoted by contractor deemed included removal of excess soil/Addition of soil as required). |
| 20 | M&L for site clearance, to remove the bushes and making area workable etc all as specified and as directed |
| 21 | M&L 50mm thickMoorum/red bajri for berms including spreading, levelling, watering androlled with power roller of 8 to 12 tonne capacity to required camber and gradient complete all as specified and as directed. |
| 22 | Providing & laying of hot applied 2mm thick, thermoplastic compound for center or edge line, marking (reflective type) including reflectorising glass beads @ 250gm per Sqm area,as per IRC-35, of white/yellow colour (approved colour) and shade for road marking on bituminous/concrete road surface as per demarcation and as directed by GE |
| 23 | Taking down for cat eye and dealineator of any description etc complete all as specified and as directed |
