|
| 1 | A) Refractories Roast Bricks |
| 2 | Fire Tiles Brick No. 27 |
| 3 | Fire Tiles Brick No. 29 |
| 4 | Angle Bricks Brick No. 88 |
| 5 | Ash Bricks Brick No 16 to 24 |
| 6 | Air Pocket Brick Brick No 100 |
| 7 | Air Pocket Brick Brick No 101 |
| 8 | Brick No. 92 |
| 9 | Brick No. 93 |
| 10 | Insulation Bricks |
| 11 | 24\" x 12\" x 3\" tiles |
| 12 | Fire Bricks IS : 8 |
| 13 | Ash Door Bricks (Small) |
| 14 | Ash Door Bricks (Big) |
| 15 | Fire Clay |
| 16 | Ceramic Fibre Blanket |
| 17 | Ceramic Tube |
| 18 | Hand gloves heat proof |
| 19 | B) Electrical Items Heating Elements Coil |
| 20 | Copper Wire 10 SWG with Porcelain Bit |
| 21 | Brass Connector for Heating Coil |
| 22 | Supply, delivery at site and laying of 1.1 Kv grade XLPE insulated PVC outer sheathed armoured Alluminum cable conductor power cable of following size either through cable duct or through cable tray or through protection pipes incl end termination as required and as per technical specification. a) 3 ½ core X 35 sq. mm. (Al.) |
| 23 | b) 3core x 6 sq mm (Al) |
| 24 | c) Termination of Cable with necessary Gland & Socket |
| 25 | d) Single core Unsheathed PVC Insulated Flexible cable with necessary socketing, etc complete. Single core 35sq mm (CU) |
| 26 | C) Switches and Brakers 200Amp TPN Fuse Switch unit FN Type Open/Closed |
| 27 | 100 Amp TPN Fuse Switch unit FN Type Open/ Closed |
| 28 | 32 Amp TPN Fuse Switch unit FN Type Open/ Closed |
| 29 | 32 Amp-TPN Isolator |
| 30 | 16 Amp. DP Isolator (Enclosed) |
| 31 | Contactor for Heater Group (make : LK) MNX 80 with Add on block and other components as require. |
| 32 | Contactor coil MO-90 with ad on block |
| 33 | MN2 Thermal overload Relay range 3-5 A |
| 34 | MN5 Thermal overload Relay range 14-23 A/9-15 A |
| 35 | MNX 16 DOL starter |
| 36 | D) Fuse and Fuse base & MCBs TPN S-D-F suitable for DIN fuse-link (TPN & FP) in open executionHRC Fuse Base HN/ HQType : FN 100A TPN |
| 37 | TPN S-D-F in SS EnclosureFN 100TPN (Make : LK) |
| 38 | TPN S-D-F in SS EnclosureFN 160TPN (Make : LK) |
| 39 | 10A-32A HF type cylindrical fuse links |
| 40 | 40 A HF type Fuse |
| 41 | 63A HF type Fuse |
| 42 | 63A HN Din type fuse link |
| 43 | 80A HN Din type fuse link |
| 44 | 100A HN Din type fuse link |
| 45 | 125A HN Din type fuse link |
| 46 | 160A HN Din type fuse link |
| 47 | 300 A Porcellain Fuse |
| 48 | Push Button Switch |
| 49 | LED Indicator Lamp |
| 50 | SP MCB 10A -32A, D curve |
| 51 | SP MCB 40A -63A, D curve |
| 52 | DP MCB 6A -32A, D curve |
| 53 | DP MCB 40A -63A, D curve |
| 54 | TP MCB 6A -32A, D curve |
| 55 | TP MCB 40A -63A, D curve |
| 56 | E) Meters & Selector Switches 0-125A Ammeter AE 4\" x 4\" |
| 57 | 0-15A Ammeter AE 4\" x 4\" |
| 58 | 0-300 A Ammeter AE 4\" x 4\" |
| 59 | 0-500 A Volt Meter AE 4\" x 4\" |
| 60 | Temperature Controller meter |
| 61 | 300/5A Current Transformer |
| 62 | Voltmeter Selector Switch (VSS) 10A |
| 63 | Voltmeter Selector Switch (VSS) 16A |
| 64 | Ammeter Selector switch (Salzer Make ) without CT16A |
| 65 | Ammeter Selector switch (Salzer Make ) with CT16A |
| 66 | Ammeter Selector switch (Salzer Make ) with out CT32A |
| 67 | Ammeter Selector switch (Salzer Make ) with out CT40A |
| 68 | ON -OFF Rotary Switch 1 pole 16A |
| 69 | ON -OFF Rotary Switch 1 pole 32A |
| 70 | ON -OFF Rotary Switch 2 pole 16A |
| 71 | ON -OFF Rotary Switch 2 pole 32A |
| 72 | ON -OFF Rotary Switch 3 pole 16A |
| 73 | ON -OFF Rotary Switch 3 pole 32A |
| 74 | F) Indicators and Controllers LED Indicating Lamp |
| 75 | Chrome Allumina Thermocouple |
| 76 | Temperature controller Meter K type(0-1200 Deg. C) |
| 77 | Thermocouple compensating wire (High qualit) , K type |
| 78 | G) Mechanical Parts Repairing and Overhauling the front Door Assembly with S.S rod, Grade 310 , Ceramic Blanket 128 Density 1400 Degree C Temperature Carrying etc. complete required including dismantling the damage items and restore. |
| 79 | MS door covering sheet |
| 80 | Shaft for Door lifting Gear |
| 81 | Handle for Door Lifting |
| 82 | Shaft for door Operating Handle |
| 83 | Pulley for Door Operating |
| 84 | Chain i) 1\" x 3 Mtr. |
| 85 | Chain ii) 3/4\" x 2.5 Mtr |
| 86 | Spring Sets for door Pressing to guide rail |
| 87 | Trolley Rollers |
| 88 | Trolley Pin |
| 89 | Trolley Bush |
| 90 | Trolley Socket |
| 91 | Ash Collection door hinge block |
| 92 | Liver |
| 93 | Bearing Sets(Bearing, ring & socket) for Blower motor Fresh Air |
| 94 | Bearing Sets(Bearing, ring & socket) for Main door lifting sprocket |
| 95 | Bearing Sets(Bearing, ring & socket) for Handle unit arrangement. |
| 96 | Handle Pin for Door lifting |
| 97 | Sprocket for door lifting gear |
| 98 | Counter Weight |
| 99 | Ash collection spade and hooks |
| 100 | Ash Collection Tray Stainless Steel |
| 101 | Sprocket for Door operating Handle |
| 102 | Turn Buckle for door lifting chain |
| 103 | Painting of furnace unit and charging trolley by using aluminum paints before applying red oxide. |
| 104 | Painting of Pollution control unit by using aluminum paints before applying red oxide. |
| 105 | Servicing of Charging trolley and main charging door. |
| 106 | Fresh Air Blower |
| 107 | 3mm M.S Sheet (8\"x4\") |
| 108 | 3mm M.S Sheet (4\"x4\") |
| 109 | M.S Angle 50mm x50mm |
| 110 | M.S Angle 25mm x25mm |
| 111 | Nut, Bolt 5/8 x2” with washer |
| 112 | Nut, Bolt ½” x2” with washer |
| 113 | Nut, Bolt 3/8 x2” with washer |
| 114 | H) POLLUTION CONTROL UNIT Flue exhaust Blower with 10Hp motor (ABB Make ) with SS Impeller (ID Fan) |
| 115 | Blower Casing With SS impeller and accessories as require including dismantling the other unit. |
| 116 | Square to round duct |
| 117 | 200 Dia MS Round Pipe from Blower unit to Chimney ductling |
| 118 | 200 Dia Flange MS |
| 119 | Asbestos Tope |
| 120 | Necessary GI Pipes, Nipple , Valves, Sockets, etc and accessories for Changing of Scrubber and ventury Damages Part of water line from slurry Pump to Scrubber unit. |
| 121 | Repairing of Recirculation pump with heat vernishing, coil rewinding , etc complete 2 HP slurry water pump. |
| 122 | Nut, Bolt washer etc. of adequate capacity require for replacement of damaged items. |
| 123 | Reapiring and servicing of Pollution control unit with cleaing of Blower unit and Mist eliminator. |
| 124 | MS Patti 40x6 mm |
| 125 | Supply, delivery at site, installation, Testing and commissioning of S.S. fabricated droplet separator/Mist eliminator with accessories Complete as per technical specification. |
| 126 | supply of new Recirculation slurry water Pump of 2HP , Kirloskar Make with necessary pipeing arrangement. |
| 127 | 10 H.P/7.5 H.P. , 3 ph, 2900 rpm - ABB Make and accessories |
| 128 | 2 H.P, 3 ph, 2900 rpm - ABB Make, and accessories |
| 129 | Spray tower unit for Scrubber |
| 130 | Spray tower unit for Ventury |
| 131 | M.S Flange |
| 132 | 30 Mtr Height chimney painting with scrubbing thoroughly and applying 2 coat red oxide and two coat Aluminum paints |
| 133 | Steel Supporting rope of the chimney of 30 mtrs height from different directions. |
| 134 | Iron Materials and nut bolt etc for fixing of steel rope with the Ground support. |
| 135 | Turn buckle, U clamp , nut bolt etc. for fixing of steel Rope with the grount. Including PCC work other civil work. |
| 136 | Supply and fixing of Aviation light of the chimney with necessary stud and accessories with welding work etc. complete. |
| 137 | Supply and fixing of Lightening arrestor of chimney unit. |
| 138 | Supply, fabrication, painting and site installation of MS channel adequate capacity of 3 nos per chimney segment. Includes cutting, drilling, necessary gusset/connection plates, fasteners and on-site bolting/welding for erection. |
| 139 | I) REPAIRING/ REWINDING/ HEAT VERNISHING OF MOTOR 10 H.P. MOTOR |
| 140 | 7.5 HP MOTOR |
| 141 | 2 H.P. MOTOR |
| 142 | 2 H.P MONO BLOCK PUMP MOTOR |
| 143 | Delivery Charges per trip Please Enable Macros to View BoQ information |
