Tender For Provision Of Deficient Md Accommodation For Sgt And Below At Af Station Najafgarh Under Ge Af Tughlakabad
Tender Value
1.53 Crore
Estimated cost
Bid Submission
27 Feb 2026
0 days left
EMD
2.28 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tughlakabad → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Deficient Md Accommodation For Sgt And Below At Af Station Najafgarh Under Ge Af Tughlakabad
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Feb-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-Feb-2026 |
| 2 | 12-Feb-2026 | Corrigendum01 | Technical Bid | 20-Feb-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Blank |
| 2 | Blank |
| 3 | Blank |
| 4 | Blank |
| 5 | Blank |
| 6 | Blank |
| 7 | Blank |
| 8 | Blank |
| 9 | Blank |
| 10 | SCH \"A\" PART XI (MISC B/R & E/M ITEMS) Note:- Excavation and earthwork to the extent required for execution of relevant item under this schedule unless otherwise specified shall be measured and paid under relevant items of Schedule \"A\" Part-II. |
| 11 | INTERNAL WATER SUPPLY |
| 12 | Supply and fixing Health Faucet (ABS Body) mild steel chromium plated sutable for 15 mm dia fixing in pipe with 1.25 meter long all as specified and directed. |
| 13 | Supply and fixingangle valve of cast coper alloy chromium plated fancy type screwed down high pressure with crutchor butterfly handle screwed both ends for iron pipe or for unions and fixed 15 mm bore (concealed) complete all as specified and directed. |
| 14 | Supply and fixingChromium plated shower roses with or without swivel joints, any size, including fixing to CPVC Pipe or union all as specified |
| 15 | Supply and fixingBrass CP Mixer for mixing hot & coald water screwed down for CPVC Pipe and fixed all as specified |
| 16 | INTERNAL ELECTRIFICATION |
| 17 | Materials & Labour for point wiring complete with two runs of 1.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLSH cable 1100 volts grade, single core, drawn through and including concealedPVC conduit (medium Grade) of adequate size (not less than 20mm dia) with all fittings andaccessories. including one run of 1.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLSH Cable (green colour), single core as earth continuity conductor connected to common earth dolly for light,fan and call bell point controlled by one switch and Cutting chases for conduits and sinking\"s for boxes duly covered with modular white cover plate with inner frame suitable for modular switches and making good to walls, floors etc.making good disturbed surfaces complete all as specified and as directed. Note:- Cost of Modular Cover Plate, Inner frame suitable for mounting modular switches, socket etc are deemed to be included in the quoted rate. |
| 18 | Materials & Labour for point wiring complete with two runs of 1.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLSH cable 1100 volts grade, single core, drawn through and including concealedPVC conduit (medium Grade) of adequate size (not less than 20mm dia) with all fittings andaccessories. including one run of 1.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLSH Cable (green colour), single core as earth continuity conductor connected to common earth dolly for one light point controlled by Two wayswitchs and Cutting chases for conduits and sinking\"s for boxes duly covered with modular white cover plate with inner frame suitable for modular switches and making good to walls, floors etc.making good disturbed surfaces complete all as specified and as directed. Note:- Cost of Modular Cover Plate, Inner frame suitable for mounting modular switches, socket etc are deemed to be included in the quoted rate. |
| 19 | Materials & Labour for point wiring complete with two runs of 1.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLSH cable 1100 volts grade, single core, drawn through and including concealedPVC conduit (medium Grade) of adequate size (not less than 20mm dia) with all fittings andaccessories. including one run of 1.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLSH Cable (green colour), single core as earth continuity conductor connected to common earth dolly for one 5Amp Switch Socket Combination on independent board and Cutting chases for conduits and sinking\"s for boxes duly covered with modular white cover plate with inner frame suitable for modular switches and making good to walls, floors etc.making good disturbed surfaces complete all as specified and as directed. |
| 20 | Materials & Labour for point wiring complete with two runs of 2.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLSH cable 1100 volts grade, single core, drawn through and including concealedPVC conduit (medium Grade) of adequate size (not less than 20mm dia) with all fittings andaccessories. including one run of 2.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLSH Cable (green colour), single core as earth continuity conductor connected to common earth dolly for one Power point (15 Amps Switch socket Combination) on independent board,and Cutting chases for conduits and sinking\"s for boxes duly covered with modular white cover plate with inner frame suitable for modular switches and making good to walls, floors etc.making good disturbed surfaces complete all as specified and as directed. |
| 21 | Materials & Labour for point wiring complete with two runs of 2.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLSH cable 1100 volts grade, single core, drawn through and including concealedPVC conduit (medium Grade) of adequatesize (not less than 20mm dia) with all fittings andaccessories. including one run of 4.0 sqmm PVC insulated unsheathed multistranded copper conductor FRLSH Cable (green colour), single core as earth continuity conductor connected to common earth dolly for Geyser Point and Cutting chases for conduits and sinking\"s for boxes and making good to walls, floors etc.making good disturbed surfaces complete all as specified and as directed. |
| 22 | Materials & Labour for point wiring complete with two runs of 4.0 sqmm PVC insulated unsheathed multistranded copper conductor FRLSH cable 1100 volts grade, single core, drawn through and including concealedPVC conduit (medium Grade) of adequate size (not less than 20mm dia) with all fittings andaccessories. including one run of 4.0 sqmm PVC insulated unsheathed multistranded copper conductor FRLSH Cable (green colour), single core as earth continuity conductor connected to common earth dolly for AC point Cutting chases for conduits and sinking\"s for boxes and making good to walls, floors etc.making good disturbed surfaces complete all as specified and as directed. |
| 23 | Supply and fixing LED lights fitting with high output diffuser 4 feet 20 watt, 220 V AC batten type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 24 | S & F ceiling fan 230V, 50 Hz AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as specified and directed. |
| 25 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm (for Toilets) |
| 26 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m (for Kitchen) |
| 27 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexiblecopper conductor cable of suitable size complete |
| 28 | Supply and fixing LED Lamp 9 watt 220 volts AC of suitable size complete Make : havellsor equivalent model of Philips/Bajaj/CROMPTON etc. |
| 29 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 30 | S&F LED Building Securitylight fitting 25 watt complete all as specified and directed. |
| 31 | S&F GI light gradepipe 1.5m long bend to 45 degree andof diameter 25 mm suitable to building security light power cord pipediameter with necessary clamps of for fixing building security light all as specified and directed including making hole to wall if necessary (For Bldg Security Light) |
| 32 | Material and labour sub main wiring with two single core PVC insulated unsheathed cable 6.00 Sqmm (Nominal area) with multistranded FRLSH copper conductor cable, 1100 volts grade drawn through conceled PVC Conduit with all fittings and accessories and earth continuity conductor of single core PVC insulated, unsheathed cable 6.00 Sqmm (Nominal area) with multistranded FRLSH copper conductor, 1100 volts grade and making gooddisturbed surfaces complete all as specified and as directed. |
| 33 | Supply and fixing MCCB 63 Amps 4P 25 KA 415 Volt including MCCB Enclosure for 63 Amp MCCB fixed on wooden board of appropriate size for mounting of enclosure complete all as specified and as directed. Rate inclusive of fixing of cable including lugging complete. |
| 34 | Supply and fixing Smart RF/CellularSingle Phase AC Meter Tamper Proof, Static Meter of Class 1.0, 315 V, 50 Hz, 10 A-60 A conforming to IS-16444 and relevant IEC standards with inbuilt Radio Frequency communication facilitywith self healing mesh network with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED/LCD based circuitry including Polycarbonate Meter Box of minimum suitable size for 1 Phase meter with viewing glass, concealed hinge and earth bolt plugged complete all as specified and directed. Meter Should support sending the following data : 15/30 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, monthly billing survey for Cumulative Energy and Max Demand to software Meter should have connect / disconnect functionality operable from mdm/billing software and prepaid features would be MDM / Billing end as per prevalent IS . Including Taking down of existing meter and deposit to MES store yard for safe custody all as specified and as directed (For06 Qtrs)Note:- Contractor has to ensure integration and maintainance of the above 06 nos of meters withthe existing Advance Metering infrastructure (AMI) of smart meters of different makeswithout any additional infrastructure and cost implication. |
| 35 | Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferablyvertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion |
| 36 | Supply and fixingwater heater storage type (Geyser) vertical type with inner container of capacity 25 ltrs, electrically operated, AC 230 Volts, BEE 5 star rated, ISI marked including 04 Nos of hold fasteners nuts of suitable size fixed in brick wall including safety valve, thermostats, NRV, SS connection pipe hot and cold complete all as specified and as directed. |
| 37 | ROAD WORK |
| 38 | Material and labour and preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2.00 mm thick single coat as in center line and edge line road marking of 150/100 mm width using HOT MARK thermoplastic paint ( Hot application) white/yellow by indigenous modern propelled road marking machine as directed including all ingradients such as blinder, glass beads Titanium dioxide, calcium carbonate inter fillers themoplastic requirement for glass shall be the table No 8004 of MORT specification including spraying of glass beads titanium dioxide calcium carbonate inter fillers themoplastic requirement for glass shall be the table No 8004of MORT specifcation including spraying of glass beads etc all as per manufacure instructions and as directed by Engr-in Charge. |
| 39 | AREA DRAINAGE |
| 40 | Material and labour for pre-cast perforated RCC drain cover with frame ( rectangular or square) the area of each cover should not be more than 0.5 square meter and thickness of 60 mm each with holes, manufactured with M-30 grade of concrete by vibro compacting process using accurately designed moulds and suitably reinforced to enable the covers to take load as specified i.e M-20 MT for heavy duty (When tested as per IS -12592) complete all as specified and as directed. |
| 41 | SEWAGE DISPOSAL |
| 42 | Supply, laying in trenches and jointing of 200 mm dia bore double wall corrugated polyethelene (HDPE) pipe of stiffness class designation SN8 including all necessary jointing material and fittings such as couplers, connectors,bends, elbows ,Tees and end caps etc complete all as specified and as directed. |
| 43 | Total amount of Schedule \"A\" Part XI carried over to General Summary |
| 44 | Blank |
| 45 | Blank |
| 46 | Blank |
| 47 | Blank |
| 48 | GENERAL SUMMARY |
| 49 | Lumpsum price worked out by the contractorfor “BUILDINGS & STRUCTURES” as listed inSchedule ‘A\" Part I representingabove / below the lumpsum price as inserted by MES for Schedule ‘A’ Part I on Srl Page No. 25 |
| 50 | Lumpsum price worked out by the contractorfor “EXCAVATION,EARTHWORK & SITE CLEARANCE (FOR SCHEDULES OTHER THAN SCHEDULE \"A\" PART-I)” as listed inSchedule ‘A\" Part II representingabove / below the lumpsum price as inserted by MES for Schedule ‘A’ Part II on Srl Page No. 26 |
| 51 | Lumpsum price worked out by the contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A\" Part III representingabove / below the lumpsum price as inserted by MES for Schedule ‘A’ Part III on Srl Page No. 28 |
| 52 | Lumpsum price worked out by the contractor for “INTERNAL ELECTRIFICATION ” as listed in Schedule ‘A\" Part IV representingabove / below the lumpsum price as inserted by MES for Schedule ‘A’ Part IV on Srl Page No. 30 |
| 53 | Lumpsum price worked out by the contractorfor “DEMOLITION & DISMANTLING” as listed in Schedule ‘A\"Part V representingabove / below the lumpsum price as inserted by MES for Schedule ‘A’ Part V on Srl Page No. 31 |
| 54 | Lumpsum price worked out by the contractor for “ROAD/ PATH/ CULVERT” as listed in Schedule ‘A\"Part VI representingabove / below the lumpsum price as inserted by MES for Schedule ‘A’ Part VI on Srl Page No. 34 |
| 55 | Lumpsum price worked out by the contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A\" Part VII representingabove / below the lumpsum price as inserted by MES for Schedule ‘A’ Part VII on Srl Page No. 36 |
| 56 | Lumpsum price worked out by the contractor for “EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A\" Part VIII above/below the lumpsum price as inserted by MES for Schedule ‘A’ Part VIII on Srl Page No. 37 |
| 57 | Lumpsum price worked out by the contractor for “SEWAGE DISPOSAL ” as listed in Schedule ‘A\" Part IX above/below the lumpsum price as inserted by MES for Schedule ‘A’ Part IX on Srl Page No. 39 |
| 58 | Lumpsum price worked out by the contractor for “AREA DRAINAGE” as listed in Schedule ‘A\" Part X representingabove / below the lumpsum price as inserted by MES for Schedule ‘A’ Part X on Srl Page No. 41 |
| 59 | Total amount of SCHEDULE \"A\" PART XI (MISC ITEMS) (B/R & E/M ITEMS) brought forwarded from Serial Page No.49 |
AI Tender Summary
Tender Timeline
Feb 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Feb 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Feb 20, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedFeb 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender