|
| 1 | Taking down Shutters of any description exc 1 sqm and notexc2sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 Sqm & n exc 4 sq. m each,complete all as specified and directed. |
| 3 | S&F 105x60mm size pressed steel frames for doors with one or more rebates including filled with PCC 1:3:6 in the coreand necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,complete all as specified and directed. |
| 4 | M & L for 35 mm thickSecond class hard wood glazed and skelton shuttersopen rebated and prepared to receive glass, gauze /WIRE MESH etc with sash bar any number fitted with cut and mitered beads for securing glass gauze etc, sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats complete all as specified and as directed. |
| 5 | S & F inGalvanised mild steel wire cloth, Galvanised mild0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 6 | S&F 30mm thick flush shutters, solid core construction, with block board coreand ply wood face panels, commercial type on both sides complete, all as specified and directed. |
| 7 | S&F Butt hinges of 100 mm size, medium weight, cold rolled mild steel and fixed complete all as specified and directed. |
| 8 | S&F 200 mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed. |
| 9 | S&F 150 mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed. |
| 10 | S&F 300 mm long mild steel sliding door bolts, ISI marked plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified anddirected |
| 11 | M & L for preparation of new wooden surfaces of any description exceeding 10 cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 12 | S&F in repair rubber beading 75mm wide fixing with nail/screw, complete all as specified and directed. |
| 13 | M&L preparation of new surfaces of steel and iron of any description over 10cm in width or girth not otherwise described, and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and as directed. |
| 14 | S&F in repair 150 mm MS pressed handle oval type stove enamelled black complete all as specified and directed. |
| 15 | S&F in repair 200 mm long mild steel barel tower bolt stove enamelled black with bright bolt and fixed, complete all as specified and directed. |
| 16 | S&F in repair 300 mm mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 250mm complete all as specified and directed |
| 17 | S&F in repair 100 mm size but hinges medium weight cold rolled mild steel complete all as specified & directed. |
| 18 | S&F in repair 100 mm sizebutt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and as directed by Engr-in-charge. |
| 19 | S & F in repairPVC hinges of 100 mm long complete all as specified and directed. |
| 20 | S&F in repair Aluminium, anodised barrel tower bolt of extruded section of 150mm long complete all as specified and as directed by Engr-in-charge. |
| 21 | S&F in repair Aluminium handles extruded type ,anodised of 150 mm size complete all as specified and as directed by Engr-in-charge. |
| 22 | S&F in repair safety type, brass with mild steel hasp & staple safety type with mild steel hinge pinincluding bolt to hinge plate and fixed with screws of 100mm length all as specified and directed |
| 23 | S&F in repairs of stainless steel curtain rod,20-25 mmdia with supportsbracket and fancy type 02 Nosfenals on top of both ends toof each curtain rodtobe provided, cut to length as reqired and colour as selected& and rates includedin running meter of rod all as specified and directed by Engr-in-charge |
| 24 | S & F in repair of 2nd class hard wood Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.. and removing old beadscomplete all as speficied & directed |
| 25 | S&F in repair double legged door stopper of aluminium alloy with rubber complete all as specified and directed. |
| 26 | Easing of door /cupboard shuttersexc 1.0 Sqm but n.exc 2.0 sqm each for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed. |
| 27 | Easing of window shuttersn.exc 1.0 Sqm eachkitchen cupboard shutters, show case shutter drawers including fixing of screws adjusting handles, knobs tightening piano hinges including misc small adjustments complete all as specified and directed. |
| 28 | Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed |
| 29 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed |
| 30 | S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-charge. |
| 31 | S & F in repairs Galvanised mild steel wire cloth, Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engr-in-charge. |
| 32 | S&F in repair mild steel helical door spring 300 mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed. |
| 33 | S&F in repair Plain colour 1mm PVC sheet fixed or laid on window by using steel winding wire complete all as specified and directed by Engr-in-charge. |
| 34 | Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as directed. |
| 35 | S&F wood grain printed PVC sheet PVC door frame of size 50 mm x47 mm made out of 5 mm colour PVC sheet reinforced with MS tube , fixed in opening complete all as specified and directed . |
| 36 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheetbeading.for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 37 | S&F 100 mm sizebutt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and as directed. |
| 38 | S&F Aluminium, anodised barrel tower bolt of extruded section of 150mm long complete all as specified and as directed. |
| 39 | S&F Aluminium handles extruded type ,anodised of 150 mm size complete all as specified and as directed. |
| 40 | S&F in repairs 18mm thick 100% Lead free both side plain laminated WPC sheet of any colour with using sunmica of choice of colour on both side for kitchen cabinet shutters,shelves and shutters for cup board or similar use are required bracket etc. The panels shall be fabricated using adhesive and screw where ever required and all edges shall be covered with 2mm thick edge bending tape or 90 degree edge bent finish as per manufactures instruction and make approved by GE complete all specified and directed.Note-All fittings and fixtures such as soft closer,handel piano hinges ,magnet catches etc for the shutter should be included in rate quoted by the contractor. |
| 41 | Dismantling of wrought iron or mild steel work of any description not otherwise provided forcomplete all as specified and directed. |
| 42 | S&F of MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted/welding , or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 using angle .bar,flat etc section complete all as specified and directed. |
| 43 | Removal of air lock / blockage of water in GI tubing 15 mm /20mm/25mm/32mm/50mm bore, cleaning the pipe or fittings etc and re-fixing in the same position complete all as specified and directed Up to 12th storey of building complete all as directed specified. |
| 44 | Petty repairs to leaking water in bib taps, pillar taps stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed by Engr-in-charge. |
| 45 | Petty repairs to PVClow level flushing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend incl replacing of rubber washer checknuts plunges float valve complete handles, siphonedetc for any type of flush complete all as specified and directed by Engr-in-charge. |
| 46 | Dismantling of existing sunken treatment including plaster and M&L for water proofing treatment on existing sunken portion with the following step complete all as specified and directed - (a) 15 mm thick (average) plaster on sunken floor in CM (1:4) with waterproofing compound @ 3 % by weight of cement complete all as specified & directed.(b) M&L for providing two coat of master seal 550 or equivalent to prevent leakage/seepage through sunken floor over prepared surfaces complete all as specified and directed.(c) One spout of 40mm GI Pipe light grade shall be provided in Sunken floor and sunken portion shall be filled with lean concrete 1:5:10 using brick aggregate complete all as specified anddirected. Note- Only plan of the floor area shall be measured and paid. |
| 47 | Supplying and laying of CPVC pipes OUTER DIAMETER 20 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors .CPVC pipes as per IS:15778 are produced inStandard Dimensional ratios SDR 11Pressure bearing capacity of SDR 11pipes @23°C is 28.12kg/cm² & at @82°C 7.03kg/cm² includes all plain CPVC fittings and pipe cutting fixing with CPVC solvent cement and testing complete all as specified and directed. |
| 48 | Taking up or down 15mm dia bore steel tubing and connections including cleaning for refixing and removal from site complete all as specified and directed .Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 49 | Taking up or down 20mm dia bore steel tubing and connections including cleaning for refixing and removal from site complete all as specified and directed. Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 50 | Taking up or down 32mm dia bore steel tubing and connections including cleaning for refixing andremoval from site complete all as specified and directed. Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 51 | Taking up or down 50mm dia bore steel tubing and connections including cleaning for refixing andremoval from site complete all as specified and directed. Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 52 | Refixing old steel tubing of 15mm bore and connections in new or old position (walls,cellings, floors etc.) complete all as specified and directed by EIC.Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 53 | Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, cellings, floors etc.) complete all as specified and directed by EIC.Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 54 | Refixing old steel tubing of 32mm bore and connections in new or old position (walls,cellings, floors etc.) complete all as specified and directed .Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 55 | Refixing old steel tubing of 50mm bore and connections in new or old position (walls, cellings, floors etc.) complete all as specified and directed .Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 56 | S & F 15 mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or infloors including cutting threading and making forged bends on pipes MS hooks etc any position i.e concealedcomplete all as specified and directed by EIC.Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 57 | S & F 20 mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or infloors including cutting threading and making forged bends on pipes MS hooks etc any position i.e concealedcomplete all as specified and directed by EIC.Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 58 | S & F 32 mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or infloors including cutting threading and making forged bends on pipes MS hooks etc any position i.e concealedcomplete all as specified and directed by EIC.Note-.Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 59 | S & F50 mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or infloors including cutting threading and making forged bends on pipes MS hooks etc any position i.e concealedcomplete all as specified and directed by EIC.Note-.Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 60 | S & F in repairOUTER DIAMETER 25 mm SDR 11fittings CPVC fittings OF brass (Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc), Unions, Ball valves, Flange and tank adaptor). |
| 61 | S & F in repairOUTER DIAMETER 20 mm SDR 11fittings CPVC fittings OF brass (Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc), Unions, Ball valves, Flange and tank adaptor). |
| 62 | S&F in repair small fitting of galvanized iron medium grade such as socket, elbow, nipple or different sizes Tee, union reducer etcand fixed complete to wall or infloors including cutting threading and making forged bends on pipes MS hooks etc any position for 15mm/20mm bore pipeall as specified and directed by Engr-in-charge. |
| 63 | S&F in repair small fitting of galvanized iron medium grade such as socket, elbow, nipple or different sizes Tee, union reducer etcand fixed complete to wall or infloors including cutting threading and making forged bends on pipes MS hooks etc any position for 32mm/50mm bore pipeall as specified and directed by Engr-in-charge. |
| 64 | S &F in repair 32mm/40mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gm complete all as specified and as directed. Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 65 | Cutting chases, pinnng in, in brick walls making good to faciing where required and pointing in cement mortar 1:3 for concealed water tubing, and crossing one side of wall to another side by cutting or drilling exc 10 cm but nt exc 50 cm girth complete all as specified and as directed.Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 66 | S&F in repair gun metalglobe or gate valve for 20 mm bore pipe with iron wheel and screwed both ends for iron ppes all as specified and as directed. |
| 67 | S&F in repair gun metalglobe or gate valve for 32 mm bore pipe with iron wheel and screwed both ends for iron ppes all as specified and as directed.Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 68 | S&F in repair gun metalglobe or gate valve for 50 mm bore pipe with iron wheel and screwed both ends for iron ppes all as specified and as directed.Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 69 | M & L for preparation of OLDpainted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 70 | Ditto all as per item No69 here-in-before but applyingon steel surfaces. |
| 71 | Taking down CI,rain water / vent pipes (any size & pattern) including all fittings, heads, noses, bends, swan necks etc including cleaning or repairing or removal from site, complete all as specified & directed. |
| 72 | S&Fof 100/110mm cast iron sand cast soil waste or vent pipes in any length with or without ears with cement joints laid in trenches, floors or fixed to walls etc all as directed including making good to match with existing surface complete all as specified and directed Note-.Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 73 | S&Fof 50mm cast iron sand cast soil waste or vent pipes in any length with or without ears with cement joints laid in trenches, floors or fixed to walls etc all as directed including making good to match with existing surface complete all as specified and directed Note-The rate quoted by the contractor shall included upto 12th storey Height |
| 74 | S&F in repair 100/110mm mmbore dia cast iron branches pieces( bends , junction, equal or unequal Y/T(single or doble )coupler,reducer, cowl etc) & oval access doors ,with cement joint, fixed on walls, floors etc , complete in any condition any positionall as specified. |
| 75 | S&F in repair 50 mmbore dia cast iron branches pieces( bends , junction, equal or unequal Y/T(single or doble )coupler,reducer, cowl etc) & oval access doors ,with cement joint, fixed on walls, floors etc , complete in any condition any positionall as specified. |
| 76 | S&F in repair for 50/100 mm dia pipe stack clamps out of50 mm by 5 mm flat ironroundiron stays , including bolts and nuts and securing ends of stays to wall or roof pipeany dia complete all as specified and directed .The rate quoted by the contractor shall included upto 12th storey Height |
| 77 | M & L for preparation of OLD decorated plastered surfaces of wall including filling wall care putty where required and applying one coat of oil emulsion distemper complete all as specified and directed. |
| 78 | M&L for cleaning of RCC water tank over 9 to 12 storey building of AGV area with 35000 to 45000 ltr capacity including removal of all deposited scales, dirt and settled sand particals and cleaning with brushing, sweeping and brooming of inner wall (including partition wall b/w the tank) of the tank and washing the complete with bleaching powder solution and three coat of lime coating in inner wall and writing the date of cleaning with synthetic enamel paint on the tank etc all as specify and directed by EIC.Note. 1. work shall be carried out with trained staffwith hygeine and safety equipment. 2. Sand, silt other material shall be thrown out side of MD land as per direction of EIC. |
| 79 | M&L for cleaning of RCC water tank over 9 to 12 storey building of AGV area with 12000 to 15000 ltr capacity including removal of all deposited scales, dirt and settled sand particals and cleaning with brushing, sweeping and brooming of inner wall of the tank and washing the complete with bleaching powder solution and three coat of lime coating in inner wall and writing the date of cleaning with synthetic enamel paint on the tank etc all as specify and directed by EIC.Note. 1. work shall be carried out with trained staffwith hygeine and safety equipment. 2. Sand, silt other material shall be thrown out side MD land as per direction of EIC. |
| 80 | S&F in repairs 15mm bore chromium platedcast copper alloy bib taps fancy type with flange of Cat part No 7606 of Make-Prayag or Cera/Essco complete all as specified and directed. |
| 81 | S&F in repairs 15mm bore chromium platedcast copper alloy pillar cock ofcomplete all as specified and directed. |
| 82 | S&F in repairs 15mm bore angle valves, cast copper alloy fancy type chromium plated with flangecomplete all as specified and directed. |
| 83 | S&F in repairs 15 mm borestop valves, cast copper alloy fancy type chromium plated with flangecomplete all as specified and directed. |
| 84 | S&F in repair chromium plated overhead shower multiflow of with shower arm 225 mm (with flange) complete all as specified and directed. |
| 85 | S&F in repairs brass chromium plated towel rail of 450 mm long complete all as specified and directed |
| 86 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450/600 mm, complete all as specified and as directed. |
| 87 | S&F in repair waste fittings brass,chromium plated for WHB with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of size 32 mm, diacomplete all as specified and as directed. |
| 88 | S&F in repair waste fittings brass,chromium plated for sink with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of size 40 mm, complete all as specified and as directed. |
| 89 | S&Fin repairs PVC waste pipe 32 mm dia, 800/900mm long, complete all as specifie and as directed. |
| 90 | S&Fin repairs PVC waste pipe 40 mm dia, 800/900mm long, complete all as specified as directed. |
| 91 | S & F in repair 10 litre capacity, PVC valveless, symphonic action type, flushing cistern, low level , white with inlet, ball valve float, and handle including brackets and connections to pipes, complete all as specified and as directed. |
| 92 | S&F in repairs internal flushing kit of PVC low level flushing cistern and making in functional complete all as specifiedand dircted . |
| 93 | S&F in repair 100mm / 125mm dia mild steel chromium plated grating with or without waste holefixed on floor trap / nahni trap in CM 1:6 all as specified and directed by Engr-in-charge. |
| 94 | S & F in repairVitreous china wash basin , white , flat back, size 550 x 400 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed. |
| 95 | S&F for plastic water closet seat cover colour/ white, closed pattern with flat bottom and MS CP or aluminised hinging device as in repair complete all as specified and directed. |
| 96 | S & F in repair Vitreous china squatting pan \"orrisa\" pattern size 580 x 440 mm white integral flootrests ( excluding flushing cistern ) including connection to trap and to flushing pipe anti syphonage pipe etc complete including making good to floor, complete all as specified and as directed. |
| 97 | S&F in repair vitreous china wash down water closet pedestal pan white excluding flushing cistern and flush pipes complete all as specified and as directed . |
| 98 | S&F in repairs health faucet cock brass chromium plated including 1M long flexible pipe of chromium plated complete all as specified and directed |
| 99 | S&F in repair looking mirror 600 x 450mm beveled edges of selected quality glass mounted on 6mm commerical ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws, complete all as specified and directed by Engineer-in-Charge. |
| 100 | S&F in repair MS brackets for WHB/kitchen sink including taking out of existing WHB and kitchen sink and fixed in same position including making good etc complete all as specified and directed. |
| 101 | S&F in repair sinks made of stainless steel1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 102 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing , removing serviceable tiles from site and rubbish off the premises complete as directed. |
| 103 | M&L Coloured Glazed digital ceramic tiles(350x250)x7 mm/ (450x350)x7mm thick or as required size of 7 mm thick vertical surface as dado/skirting, set andjointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 104 | M&L non skid ceramic digital tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 10 mm thick plaster in CM 1:4 complete all as specified and directed.. |
| 105 | Dismantling stone slabs and tiles of any description or thickness, laid, bedded and pointed in any mortar as in floors, aprons etc complete all as specified and directed. |
| 106 | M&L screed bed or bedding layer or mortar 20 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed. |
| 107 | M&L for 16 -18mm thick granite(of any type) work (table rubbed and polished) in steps jambs, pillers, window -cills cooking platforms and like in cement mortal (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting and moulding edges complete all as specified and directed. |
| 108 | Demolition of Cement concrete (Unreinforced) n exe 15 cm thickness (below or above ground level) complete all as directed. |
| 109 | M&L for Providing, cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate), in lintels upto1.5m clear span,cills,steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering,slightly rounded or chamfered angles and throating, as directed |
| 110 | M&L for sand cushioning not exc 25mm thick as filling under floors including watering and consolidation complete all asspecied and as directed. |
| 111 | M&L for 60mm thick PCC M-35 machine pressed coloured interlocking pavor block any shape and size confirming to IS-15658-2006 using with grey cement and pigment complete all as specified and directed. |
| 112 | Labour onlyfor refixing of60mm thick PCC M-35 machine pressed coloured interlocking paver block any shape and size confirming to IS-15658-2006 using with grey cement and pigment including removing of existing paver blocks and refixing with proper slope and gradient complete all as specified and directed. |
| 113 | Dismantling of Plain or corrugated steel sheeting, any gauge,thickness, including Nainital orsimilarpattern roof coverings complete all asdirected. |
| 114 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mps as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge. |
| 115 | M&L 25mm thick plain cement concrete type B0, 1:2:4, (using 12.5 mm graded stone aggregate) as in sub base for floor complete all as specified and directed. |
| 116 | M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in floor/plinth protection/sub base , finish even & smooth without using extra cement all as specified and directed. |
| 117 | Taking down cement plaster on Brick or Stone,concretewalls ,ceiling etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 118 | M & L for rendering 10 mm thick in cement plaster (1:6) on fair faces of brick work or concrete surfaces , finished even and smooth without using extra lime orcement complete all as directed by the Engr-in-Charge. |
| 119 | M&L for rendering 5 mm thick in cement mortar 1:3on ceilingof brick or concretesurface,finished even and smooth without using extra lime orcement complete all as directed by the Engr-in-Charge. |
| 120 | M&L for preparation of OLD undecorated surfaces of walls/celing and applying one coat of cement based paint , all as specified and directed. |
| 121 | M&L forapplying2mm thick wall care putty on newly plastered surface of wall/celing and applying two coat of oil bound distemper over a coat of primer on wall complete all as specified and directed. |
| 122 | Note for Item No 1 to 121(a) The contractor shall be employee adequate numbers of of skilled tradesman/labour for timely completion of the complaint as per time frame given belowand work to be executed upto UPTO12TH Storey(b)All T&P,safety equipments and other items required at siteunder subject contract shall be provided by Contractor. Cost of temporary supports such as Props, Jacks, Scaffolding, Shuttering etc as up to 12th storey required for each individual case component wise is deemed to be included in unit rates quoted. (c) Adequate safety arrangement need to be ensured to avoid accidents/mishap & cost of same is deemed to be included in unit rates quoted.Note : The contractor has be mobilise his material and labours within 24 hrs once any work assigned to him failing which he will be panalise for Rs. 500.00 per day after 24 hrs. (i) Priority-I : Complaints pertains to major water leaks, air locks, flushing cistern will be attended on priority-I and the same will be completed within 4 to 8 hrs. (ii) Priority-II :Compaints pertains to minor water leaks, re-glazing of door and windows, easing of joinerywill be attended on priority-II and the same to be completed within 48 hrs. (iii) Priority-III : Compaints pertains to water proofing of roof, repair of sunken slab, minor plaster work, re-flooring, replacement of joinery minor etc will be attended on priority-III and the same to be completed within one week. (iv) Priority-IV : Major plastering, reflooring, plinth ptotections, brick work etc will be attended on priority-IV and the same to be completed within one month. (v) Contractor or his supervisor shall collect the complaint/job cardfrom JE concerned between 0900 hrs to 1000 hrs on all working days and deposited the same after completion of job duly signed by user/occupants.(vi) Summary of complaints will preparedby the contractor and put up to Engineer-in-Charge last date of every month. (vii) If contractor shall not attend the complaint as per time frame given in Para (i) to (iv), Rs 500/- per complaint will be recovered from the RAR/Final bill. |
