Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | SITE ClEARANCESurface dressing /cutting of vegetation/bushed/shrubs of any type n exc. 15 cm deep in soft/loose soil and getting out including removal as required Complete all as specified and directed. |
| 2 | M & L for forming hump/embankment including raising (or lowering) earth, spreading in layers n. exc. 30cm thick, watering, ramming/rolling and finishing to required size, shape etcnot exceeding 1.50m high from base complete all as specified and directed. |
| 3 | SANITRY BLOCKExcavating in trenches not exc 1.5m wide and exc 1.5 m in depth but n exc 3.0m deep, for foundations, laying of pipes & cable etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 4 | M&L for Reinforced cement concrete (Design Mix) M-25 using 20 mm graded crushed stone aggregate as in col-umn, pillars, piers, post and struts etc. complete all as specified and directed.(Note: Steel reinforcement shall be measured & paid separately) |
| 5 | M&L for Reinforced cement concrete (Design Mix) M-25 using 20mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels etc. complete all as specified and directed.(Note: Steel reinforcement shall be measured & paid separately) |
| 6 | M&L for Reinforced cement concrete (Design Mix) M-25 using 20 mm grad-ed crushed stone aggregate as in slab supported on walls and the like complete all as specified and directed.(Note: Steel reinforcement shall be measured & paid separately). |
| 7 | M & L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed. |
| 8 | M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished square, rectangular or polygonal surfaces of concrete complete all as specified and directed. |
| 9 | M&L for form work to faces of sides and soffits of floor or roof beams, cantilevers, shelves includ-ing supports, overhangs, lintels etc for rough finished flat surfaces of concrete complete all as specified and directed. |
| 10 | M&L for TMT bar 5mm dia and over upto and including 10 mm dia cut to length as in stirupps, bent to shape as required including cranking,bending .hooking end and binding with steel wire annealed not less than 0.9mm or securing with dips complete all as specified and directed. |
| 11 | M&L for Rendering 15 mm thick in cement mortar (1:6) on fair faces of brick or concrete surface finished fair and evenwithout using extra cement complete all as specified and directed. |
| 12 | M&L for Rendering 5 mm thick in cement mortar (1:3) on ceiling surfacecomplete all as specified and directed. |
| 13 | Material & labour for preparation of old plastered/new surfaces of finished walls and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note- Primer and emulsion to be carried out through air less spray machine with Mechanical meansThe work for periodical services shall include the following and the rates quoted by the bidder shall include the same.(a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorized applicator through manufacturer of the materials like Exterior emulsion paint, putty etc. after approval by the GE. |
| 14 | M & L for preparation of new/old plastered surfaces of wall and applyingtwo coat Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification complete all as specified & directed. |
| 15 | M&L for 18 to 20 mm thick machine cut kota stone slab flooring over and including20mm thick screed bedding in cement mortar 1:4 laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified and directed.Note:- The size of kota stone slab shall be not less than 550mmx550mm cut size except the location where the balance portion remain less than size as specified above |
| 16 | M&L for glazed ceramic joint free coloured tiles in vertical surfaces of size 600mmx 300mm x 7mm thickset and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed.. |
| 17 | M&L for 7 to 8 mm thick Non skid ceramic joint free coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laidjointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over & including15mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 18 | M&L for 25 mm thick PCC type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate) as inleveling /sub base of flooring complete all as specified and directed. |
| 19 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mmuprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge, complete all as specified and directed.Note :-For WPC frames, minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension on plus side shall be accepted but no extra payment on this account shall be made. |
| 20 | Supply and fixing 30 mm thick factory made wire mesh solid WPC prelim door shutter with lamination consisting of Density 650 Kg/Cum manufactured by an ISO -9001-2015 certified company, door to be paneled with SS mosquito mesh and XPM aluminium mesh for additional strength and safety purpose (confirming as per IS:4020). The door should be water proof termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. MS powder coated butt hinges size 100mm x25mmx2 mm and 32 mm long steel screws drilled suitableto pass through both the walls of the MS tube. Other hardware’s should be fixed with 19x6mm size stainless steel screw and 2 mm thick edge moulding tape or 90 degree edge bend finish etc complete as perdirection of Engineer-In- Charge, manufacturers specification & drawings complete all as specified & directed .Note:-The work for WPC shutter shall include the following and the rates quoted by the bidder shall include the same- |
| 21 | S&F factory made PVC door frame of section 50 x47 mm using 5 mm thick prelaminated heat moulded extruded PVC sheet of density 600 kg/Cum and core of section/frame dame solid using MS hollow rectangular tube of size 400mm x 20mm of guage 19 and PVC sheet of density 600 kg/cum. Grame fixed in position using 06 nos 8 mm dia and 100 mm long dash through bolts (anchor fastener) complete all as specified and directed |
| 22 | S & F 30mm thick factory made PVC panelled door shutter consisting of Stiles/Rails made out of heat moulded 5mm thick prelaminated PVC sheet of density 600 kg/cum and MS rectangular hollow tube of 40 x 20mm of guage 19 with size of member as given below. Edges/corners of stile/rail chamfered towards panel and panel consisting of 02 Nos panel of 10mm thick (5mm + 5mm) prelaminated PVC sheet of density 600kg/cum complete all as specified and directed |
| 23 | S&F factory made steel windows single shutter with tubular frame of size 40mmx79mm with Z section side hung glazed shutter fixed (with shash bar) on external side and including steel handle 100mm long of mild steel flat 20mmx5mm made to shpe 02 nos of MS tower bolts 100mm on each shutter and fixing hooks and eye of std quality as approved complete all as specified and directed. |
| 24 | M&L for preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide primer complete all as specified and directed. |
| 25 | M&L for 4 mm thick plain sheet glass ordinary quality including glazing with putty area n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 26 | S & F Stainless steel Butt hinges \"medium weight\" steel 100mm size complete all as specified and directed. |
| 27 | S & F 200mm long Stainless steel matte finish ,barrel tower bolts of extruded section complete all as specified and directed. |
| 28 | S & F 150mm long Stainless steel matte finish ,barrel tower bolts of extruded section complete all as specified and directed. |
| 29 | S & F Stainless Steel handle matte finish fabricated type 150mm long complete all as specified and directed. |
| 30 | S&F 250 mm Stainless steel ,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 31 | S & F Stainless steel Butt hinges \"medium weight\" steel 125mm size complete all as specified and directed. |
| 32 | S&Ftwo(double) legged floor door stopper of aluminum body & tougues with hard drawer steel spring fixed in floor of 140mm complete all as specified and directed. |
| 33 | M & L for cleaning of all loose dirt and dust fromroof surfaces and applyingroof treatment as under :- (a) Applying a coat of fiber reinforced PU primer confirming to ASTM D412 @ 30% water dilution on prepared surfaces and allow to dry.(b) Supply and Applying 2 coats of Hybrid PU based elastomeric single component coating over primer surface @ 10kg /10.76 Sqm total consumption having below properties:-1. Elongation - 500%-600%2. Solid contents - 80%, 3.Tensile Strength - 1.6N/mm2 4. Adhesion to concrete - 2.2N/mm2 5. Initial hardness shore strength - 60Min. 6. Tear Strength - 14Mpa. 7. Total thickness of layer shall be 1.2 - 1.5mm.Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates. |
| 34 | M & L for GI tubing medium grade 15mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 35 | M & L for GI tubing medium grade 20mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 36 | S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed. |
| 37 | S & FCP Brass toilet paper holder with wall hook bracket etc, complete set of superior quality complete all as specified and directed. |
| 38 | S & F 10 ltrs capacityPVC valve less symphonicdouble action type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and directed. |
| 39 | S&F vitreous china Wash hand basin with pedestal white, flat back type of size 550x400mm includinga pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10X7.5X15cm, 32mm dia PVC waste pipe and 32mm bore chromium plated brass waste coupling with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.(excluding tap, waste chain & plug) complete all as specified and directed. |
| 40 | S&F Vitreous China wash down water closet pan (pedestal pattern) white including fixing bolts, seat cover and flush pipe \"P\" and \"S\" trap, including connection to trap and flushing pipe , antisyphonage pipe etc including provision of PCC (1:5:10) type E-2 (using 40 mm fraded stone aggregate) in filling, making good to floor complete all as specified and directed |
| 41 | S & F Vitreous china urinal half stall type of size 355mm x 345mm x 535mm complete including provision and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal in back of cement including connecting to flushing pipe and outgoing pipe complete all as specified and directed. |
| 42 | S&F Vitreous China squatting pan, \"Orissa pattern\",size 580x440mm, white, with integral foot rests including PVC\"P\" or \"S\" trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and directed. |
| 43 | S & F PTMT urinal spreader suitable for half stall urinal (Minimum weight 60 gm) complete all as specified and directed. |
| 44 | S&F 600mmx450mm beveled edges mirror of selected quality mounted on 4mm thick AC building board or 6mm thick ply fixed to wall with rawl plug and screws complete all as specified and directed. |
| 45 | S & F for CP bib taps 15mm fancy type long body Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified. |
| 46 | S&F Pillar taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe including all accessories complete all as specified and directed. |
| 47 | S&F concealed stop cock cast copper alloy (ISI marked) fancy type, Cr plated with long shank and cup (concealed type) screwed down high pressure with Capstan head screwed both ends for iron pipe 15 mm bore dia complete all as specified and directed. |
| 48 | S&F PVC connection 600 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed. |
| 49 | S & F Tubular Towel Rail 20mm dia. \"D\" type, 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 50 | S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed. |
| 51 | S&F CP brass soap dish fancy type of one soap fixed with screw to wall complete all as specified and directed. |
| 52 | M & L for 75mm bore PVC (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) complete all as specified and directed. |
| 53 | M & L for 75mm bore PVC (SWR) multifloor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) complete all as specified and directed. |
| 54 | S&Fbrass chromium plated bottle trap for wash hand basins with inlet and outlet screwedfor pipe or connections including necessary packing, union and cap complete all as specified and directed. |
| 55 | S & F 75mm PVC SWR pipes single socketed in any length with rubber ring joints,to wall or in floor complete all as specified and directed. |
| 56 | S & F 75mm PVC (SWR) branch piece double ( double Y) equal or unequal with out access door complete all as specified and directed. |
| 57 | S & F for rotational moulded triple layered white coloured polyethylene water storage tank cylindrical vertical with closed top hoisted & fixed in position of capacity 500 ltrs complete all as specified and directed. |
| 58 | S & F Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 59 | M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed. |
| 60 | M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long ,including demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thicknesand below or above ground level complete all as specified and directed. |
| 61 | M&L for point wiring completeforOne light/Fan/Exhaust Fan/Bell point controlled by one switch with PVC insulated and unsheathed FRLSH cable 1.5 Sqmm(nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 20 mm in roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of required colour complete, including suitable cover plate of any module including 1.5 Sqmm PVC, FRLSH cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.Note :-(a)In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost(b) Cost of modular cover plate with frame shall be included in quoted rates nothing will be admissible in this account. |
| 62 | All as per srl item No 61 hereinbefore but wiring with 2.5 sqmm foe one three pin switch socket outlet 5 Amps on the independent board complete all as specified and directed. |
| 63 | All as per srl item No 61 hereinbefore but wiring with 2.5 sqmm foe one three pin switch socket outlet 5 Amps on the same complete all as specified and directed. |
| 64 | M&L for switch modular type single pole one way 1 module 6 amps 240 volts complete all as specified and directed. |
| 65 | M&L for socket 6 amps modular type 2/3 pin combined 2 module, 230 volts complete all as specified and directed. |
| 66 | M&L for ceiling rose surface bakelite 2 to 3 terminals complete all as specified and directed. |
| 67 | S&F of exhaust fan, Metal body, AC single phase, 230 Volt heavy duty of size 300 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm and Cutting, opening circular/Rectangular in shape hole on wall for fixing of exhaust fan of size 300 mm sweep including plastering and making good the disturbed surface surrounding complete all as specified and directed by Engr-in-charge. |
| 68 | S&F MCBs SP 6 to 32 Amps, 240 Vrating and to be housed in DBs catered here in after complete all as specifiedand directed.(Note :- Proper and suitable size cable lugs to be fixed with MCBs and same shall be including in quotedrate of each MCB of any rating) |
| 69 | S&F of Distribution board 4 way SPN double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting with bus bar rating 200 Amps, dust vermin proof , IP-43 protected suitable for incorporation of MCB’s and isolators all as specified and directed.Note:MCB to be measured and paid separately under respective item. |
| 70 | S&F MCB SPN 6 to 32 Amp, 240 Voltsrating and to be housed in DBs catered here in after com-plete all as specified and directed.(Note :- Proper and suitable size cable lugs to be fixed with MCBs and same shall be including in quotedrate of each MCB of any rating) |
| 71 | Supply and Fixing wall/surface mountingluminaires integrated LED Batten 20/22 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangementscomplete all as specified and directed. |
| 72 | &F of LED complete fitting 1x10 Watt, 220 Volts, AC approx. 2 feet long extruded polycarbonate environment friendly having lumen output 110 lm/watt, CCT, 6500K including electric connection with using 2 core flexible copper cable of size 1.00 sqmm from ceiling rose to tube fitting complete with all accessories complete all as specified and directed. |
| 73 | Supply & fixing LED Building security light 25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire fixed on wall including bolts & nuts complete all as specified and directed by Engr-in-charge. |
| 74 | PCC ROADSurface excavation in soft /loose soil depth not exceeding 30 cm and average 15 cm and get-ting out soft / loose soil complete all as specified and directed. |
| 75 | Addfor every 3cmor part thereof above 15cm average depth (for additional 15cm deep) complete all as specified and directed by Engineer-in-charge |
| 76 | Rolling & consolidating formation surface in cutting, using 8 to 12 tonne power roller complete all as specified and directed by Engineer-in-charge |
| 77 | M&L Laying and compacting 150 mmthick (compacted thickness ) granular sub base Course (GSB) grading as per Grade I as specifiedTable 400-1 of MoRTH specifications for road and bridge work ,2013 in a single layer over compacted subgrade with natural sand crushed gravel crushed stone crushed slag or combination thereof as per the grading required, the materials are mechanically mixed, spread and levelling on the sungrade by using mortor grader of adequate capacity and rolling with vibratory roller of capacity 80-100 KN static weight for achieving required compaction density Consolidating to required gradient and camber complete all as specified and directed with finished surface tolerance as per Table 900-1 of MoRTH specification for road and bridge works 2013 and complete all as specified and directed by Engineer-in-charge. |
| 78 | M&L Providing and Laying Dry Lean Concrete (DLC) 100 mm thick of aggregate gradation as per table 1 of SP 49 : 2014 having 7 days average compressive strength not less then 7 Mpa Minimum cement content not less then 140 kg/cum DLC mixed in batching plant transported o site and laid by electronic sensor paver including spreading and compacting using high amplitude tamping bar of paver (initial compaction ) further by double drum smooth wheeled vibratory rollers with 80-100 KN static weight to achieve min dry density necessary finishing etc complete all as specified and tolerance to be table 900-1 of MoRTH Specification for Road and Bridge work 2013 and complete all as specified and directed by Engineer-in-charge |
| 79 | Supply and laying 125 micron thick HDPE sheet (Virgin Quality ) white/transparent water proof wrinkle free without puncture having minimum weight 390 gm/Sqm over tack coat/sand cushion as specified in the design with overlap between adjacent strips and at transverse joints as minimum 300 mm complete all as specified and directed by engineer in charge. |
| 80 | M&L 200 MM thick Cement concrete work with RMC in pavement/hard-standing of flexural strength 40 kg/per square centimeter in field using 400 kg of cement per cubic meter including necessary formwork, complete all as specified and directed by engineer in charge. |
| 81 | M&L sand cushion under interlocking paver blocks including watering and consolidation complete all as specified and as directed. |
| 82 | M&L Moorum/ red bajri for berms, spread, rolled and consolidated to gradient and camber required of 100 mm thick (average) complete all as specified and directed. |
| 83 | M&L Forming 200mm deep & 20 mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A provided with 20 mm dia mild steel dowel bars 50cm long (25cm in each slab) with ferrules, spaced at 300 mm centres, including boring form work and preformed filler for dowels in 150 mm thick concrete slab completeall as specified and directed by engineer in charge |
| 84 | M&L finishing for construction of forming construction joint 30mm deep & 10mm wide filled with sealing compound grade\"A\"including necessary cutting of PQC as required complete all as specified and directed |
| 85 | M&L for finishing surface of concrete roads, pavements, but by brooming all as specified and directed by Engineer-in-charge. |
| 86 | Removal of surplus soil to a distance exc 50 mtr and n exc 250 Mtr and depositing as directed, at a level n.exc 1.5mtr above the starting point complete all as specified and directed. |
| 87 | M&L for preparing pavement surface ofand applying thermo plastic paint on marking of 2.50mm thick single coat a centre line, stop line, side line etc on roads as per IRC pattern. Road marking of 150/100mm width using hot mark thermoplastic paint hot application white or yellow by indigenous modem propelled road marking machine as directed including all ingredient such as binder, glass bends, titanium dioxide, calcium carbonate, inter fillets etc. Thermoplastic requirement for glass bends shall be confirming to BS-6086 of MORTH specification including spraying of glass bends etc. as per IRC-35 with and including traffic diversion arrangement complete all as specified and directed. |
| 88 | Supply and fixing of Stimsonite Model C-80 \"Cat Eye\" in size of width not exceeding 130mm and height not exceeding 20mm made of strong engineering high impact resistant polymer with electronic welded lenses for retro reflective in dry and wet weather condition with bituminous adhesive along the road complete all as specified and directed. |
| 89 | M & L for Retro-reflective sign board made of 2.0 mm thick aluminium sheet, fully covered with high intensity retro-reflective sheeting conforming to ASTMT- 49601 of blue colour and letters & symbols of white colour shall be made with same high intensity grade retro-reflective aluminium sub strate on both sides of size 600mm dia in round shape or 600mm equal triangular/ rectangular shapeincluding frame work with MS section complete all as specified and directed including the following items of work at site:-(i) Excavation in post holes n. exc 0.50 Cum including RFR and removal of surplus soil complete in soft/ loose soil.(ii)PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation filling for grouting the pipe.(iii)PCC (1:2:4) type B-2 (using 40 mm graded stone aggregate) as in plinth of size 450mm x 450mm x 300mm forpipe pedestal including form work, 10mm rendering in CM 1:6 and three coats of white wash. (iv)S & F Mild steel pipe 40mm dia medium grade including welding with FI 40 x 5mm, 300mm long fastener/ hold fast at bottom for fixing of sign board, total length of pipe 1.80m above GL and 0.60m below GL including twocoats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces. |
| 90 | M & L for Retro-reflective sign board made of 2 mm thick aluminium sheet, face to be fully covered with high intensity retro-reflective sheeting conforming to ASTMT- 49601 as per colour reqd and letters & symbols shall be made with same high intensity grade retro-reflective aluminium sub strate on both sides of size 1000mm x 900mm in rectagular shape (Make: Road Star) including frame work with MS section complete all as specified and directed including the following items of work at site:-(i) Excavation in trenches incl RFR and removal of surplus soil complete in soft/ loose soil.(ii)PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in fdn filling for grouting the pipe(iii)PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in plinth of size 1500mm x 900mm x 300mm forpipe pedastal including form work, 10mm rendering in CM 1:6 and three coats of white wash (iv)S & F Mild steel ISMC 75 - 02 Nos,incl welding with FI 40 x 5mm, 300mm long fastner/ hold fast at bottom for fixing of sign board, total length of pipe 1.80m above GL and 0.60m below GL incl twocoats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces. |
| 91 | M & L for Retro-reflective sign board made of 2 mm thick aluminium sheet, face to be fully covered with high intensity retro-reflective sheeting conforming to ASTMT- 49601 as per colour reqd and letters & symbols shall be made with same high intensity grade retro-reflective aluminium sub strate on both sides of size 2000 mm x 1500 mm in rectagular shape (Make: Road Star) including frame work with MS section complete all as specified and directed including the following items of work at site:-(i) Excavation in trenches incl RFR and removal of surplus soil complete in soft/ loose soil.(ii)PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in fdn filling for grouting the pipe(iii)PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in plinth of size 1500mm x 900mm x 300mm forpipe pedastal including form work, 10mm rendering in CM 1:6 and three coats of white wash (iv)S & F Mild steel ISMC 75 - 02 Nos,incl welding with FI 40 x 5mm, 300mm long fastner/ hold fast at bottom for fixing of sign board, total length of pipe 1.80m above GL and 0.60m below GL incl twocoats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces. |
| 92 | S & F Round pipe delineators with acrylic reflectors of make \"ROAD STAR\" (Gogia Plastics) model No/ Cat part No GRD-100P including fixing complete all as specified and directed by Engineer-in-charge. |
| 93 | PATH INTERLOCKINGM&L for100 mm thick cement concrete1:4:8 Type D-2 (using 40 mm graded aggregate aggre-gate) as in sub base complete all as specified and directed. |
| 94 | Removing excavated material exc 250 m but n.exc. 500m depositing where directed at a level n. exc 1.50 m above the starting point as in soil complete all as specified and directed. |
| 95 | M&L for interlocking precast coloured cement concrete glazing finished pavement blocks 80 mm thick M-40 grade with grey cement and pigment conforning to IS 15658 laid dry hand packed tightly over a layer of sand to the true levelled surface concrete tiles pattern shall be as directed complete all as specified and directed.Note: Sand shall be measured and paid separately under respective item. |
| 96 | Supply only sand complete all as specified and directed. |
| 97 | PCC HARD STANDINGM&L for150 mm thick cement concrete1:4:8 Type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 98 | M&L for100 mm thick cement concrete1:2:4 Type B-2 (using 20 mm graded stoneaggregate)complete all as specified and directed. |
| 99 | M&L Forming 100mm deep & 20 mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A provided with 20 mm dia mild steel dowel bars 50cm long (25cm in each slab) with ferrules, spaced at 300 mm centres, including boring form work and preformed filler for dowels in 150 mm thick concrete slaball as specified and directed. |
| 100 | HUME PIPE CULVERTS&F for reinforced concrete pipes class NP-2 laid & jointed complete with coller 600mm dia complete all as specified and directed by engineer in charge. |
| 101 | S&F for reinforced concrete pipes class NP-2 laid & jointed complete with coller 450mm dia complete all as specified and directed by engineer in charge. |
| 102 | M&L for rendering 15mm thick on fair faces of bricks work or concrete surface in Cement mortar 1:4 finished fair and even complete all as specified by engineer in charge. |
| 103 | Earth work in All Kind of soil excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all specified and directed, |
| 104 | Earth work in All Kind of soil excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal excavated earth lead upto 50 m and lift from 1.5m to 3.0m, complete all specified and directed, |
| 105 | Earth work in All Kind of soil excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift from 3.0m to 4.5m, complete all specified and directed, |
| 106 | M&L for Reinforced cement concrete (Design Mix) M-30 using 20 mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc; basement slabs under-reamed pillars and mass concrete etc. complete all as specified and di-rected.(Note: Steel reinforcement shall be measured & paid separately) |
| 107 | M & L RCC M-30 (Design Mix) using 20mm graded aggregate for RCC wall complete all as specified and directed(Note: Steel reinforcement shall be measured & paid separately) |
| 108 | M & L Form work for fair finished surfaces of concrete measured flat for RCC Wall, complete all as specified and directed. |
| 109 | M&L for Reinforced cement concrete (Design Mix) M-30 using 20 mm graded crushed stone aggregate as in slab supported on walls and the like complete all as specified and directed.(Note: Steel reinforcement shall be measured & paid separately). |
| 110 | M & L forForm work for fair finished surfaces of concrete measured flat for top slab of culvert, complete all as specified and directed. |
| 111 | M & L for Formwork for fair finished edges of concrete flats slab, complete all as specified and directed. |
| 112 | M&L for Providing, cement concrete1:3:6, type C-1 ( using 20 mm graded stone aggregate ) in coping including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed |
| 113 | M & L for 15mm Thick Plaster on fair faces of brick work or concrete surfaces in two layers 10mm thick in CM (1:4) and 5mm thick in CM (1:4) finished even and smooth (without using extra lime or cement), complete all as specified and directed |
| 114 | M&L for PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in plinth course coping, surface chanel junction of brick eedging and brick lining for drains as in benchingetc complete all as specified & directed. |
| 115 | M & L Add or deduct for each 25 mm girth or part thereof over or under 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped end complete all as specified and directed. |
| 116 | SEWAGE DISPOSALProviding, supplying and laying of SWC pipe, Class SN-8 Structured wall polyetethene piping system of 150 mm internal dia(Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular Corrugated and Smooth Internal surface (Double Wall) for non-pressure underground Sewage & Drainage application confirming to IS : 16098-2013 including all materials, labour T&P reqired for proper completion of work complete all as specified and directed. |
| 117 | M&L for Concrete bed to 150 mm dia drain pipes including forming cradles cement concrete,1:3:6type C- 2 ( using 40 mm graded stone aggregate)of pipes after they are laid and tested; inas directed complete all as specified and directed. |
| 118 | M&L for RCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in slab supported on walls and the beams and columns in floors, roofs landings balconies,canopies deck slabs and in shelves and like complete all as specified and directed |
| 119 | M&L for formwork to edges of concrete flat exceeding 10 cm but not exceeding 20 cm wide, for fair finished surface of concrete all as specified and directed. |
| 120 | M&L for Providing Precast cement concrete in 1:2:4 type B-1 (20mm graded aggregate) in landing cover slabs (for manholes etc.) chullah hoods, chajjas, water thoughts, mangers, shelves and similar articles with plain faces in CM 1:6 complete all as specified and directed.Note:-Reinforcement shall be measured separately |
| 121 | M&L for LLDPSeptic Tank with up flow filter including media for 10 users designed to carry sewage and sullage water, excavation in any type of soil , PCC 1:4:8 type D-2 using 40 mm graded stone aggregate below foundation Vent shaft connection etc complete all as specified and directed. |
| 122 | M&L for Soakage Well excavation, in any type of soil, foundation in PCC 1:3:6, wallsof honeycombed masonary with top ring of M-25 design mix concrete including interseptic chamber and screen chamber of brick masonary in CM, RCC cover slab in CM, RCC cover slab in M-25 / SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 M dia and3.0 m effective depth complete all as specified and shown in drawings No TD-576 Sheet 1/2 & 2/2. |
| 123 | M&L for fillings, spreading & levelling in layers\"sand\" cushioning above and side ofDWC pipe in laying in trenches complete all as specified and directed by engineer in charge. |
| 124 | RCC RETAINING WALLExcavating over areas, n exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed. |
| 125 | M&L for Reinforced cement concrete (design mix) M-25 (20 mm graded aggregate) in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses etc.; basement slabs, under-reamed piles and mass concret form work complete all as specified. |
| 126 | M&L for Formwork to faces of walls, retaining walls, abutments parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed. |
| 127 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and fair without using extra cement complete all as specified & directed complete all as specified and directed. |
| 128 | M & L for two coat of cement base paint over one coat of primer on brick or concrete surface including prepration of new plaster surfacecomplete all as specified and directed. |
| 129 | M & L for Low density polyethylene pipes (LDPE) dia 50mm of pressure rating 6 kg/ cm2 laid as in weepholes complete all as specified and directed. |
| 130 | EXTERNAL ELECTRIC SUPPLYM&L sand cushion with fine sand to under ground cables in tranches/ducts in layers 8 cm deep before laying of cable and 15cm deep over the cable including watering and consolidation complete all as specified and as directed. |
| 131 | Supplying and laying un-reinforced precast concrete cable cover Class LV, Type I, flat, size 250mm x 150mm x 40mm laid dry over electric cable for protection complete all as specified and directed by the Engr-in-Charge |
| 132 | Supply & laying or fixing or laid in trench/ducts/through pipes/in floors/under roads/under hard standing/along poles and testing cross linked polyethylene (XLPE) LT cable XLPE insulated, PVC inner sheathed, bedded, galvanised steel strip or wire armoured heavy duty 1100 V grade with stranded aluminium conductor having cross sectional area 50 Sqmm 3.5 core and conforming to IS-7098(Part-I-1988 & as per latest amendments) complete all as specified & directed. |
| 133 | Supply & laying or fixing or laid in trench/ducts/through pipes/in floors/under roads/under hard standing/along poles and testing cross linked polytehylene (XLPE) LT cable XLPE insulated, PVC inner sheathed, bedded, galvanised steel strip or wire armoured heavy duty 1100 V grade with stranded aluminium conductor having cross sectional area 25 Sqmm 4 core and conforming to IS-7098(Part-I-1988 & as per latest amendments) complete all as specified & directed |
| 134 | Supply & laying or fixing or laid in trench/ducts/through pipes/in floors/under roads/under hard standing/along poles and testing cross linked polytehylene (XLPE) LT cable XLPE insulated, PVC inner sheathed, bedded, galvanised steel strip or wire armoured heavy duty 1100 V grade with stranded aluminium conductor having cross sectional area 35 Sqmm 3.5 core and conforming to IS-7098(Part-I-1988 & as per latest amendments) complete all as specified & directed. |
| 135 | M & L for earthing complete with Galvanized Steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level, connected to and including GI iron strip of size 32x6 mm flat by means of GI bolts, nuts, and washers, protected by 40mm bore GI light grade ISI marked pipe upto and including test points. Earthing plate shall be surrounded by alternate layers 15cm thickof charcoal or coke and common salt all around bottom and top, 20mm dia GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C2 (using 20mm graded crushed store aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling in and disposal of surplus soil to a distance not exceed ing 50 M, pit cover 40 mm thick made with RCC (1:2:4) type B-1 (using 20mm graded crushed store aggrgate) including TMT reinforcement80 mm dia @ 75 mm C/C both way, MS handle of 12 mm dia, cover rest on MS angle iron frame 40x40x6mm embedded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as shown in electrical plate No-3 of SSR Part-I and all as directed.Note:- (i) Protection pipe and earthing strip upto 7.5 metershall be including in the unit rate of this item. (ii) The earth testing arrangement should be done by the contractor as per direction of Engr-in-charge. No extra payment shall be made on this account.. |
| 136 | Supply, installation, commissioning and testing of factory made (CPRI approved) LT panel Board ofSuitable size out door type (double door) 415 Volts, dust proof, vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening,and having provision for front and rear side opening with rubber beading and brasscable glands for each cable to make it weather and vermin proof.double door hinged type,both side open able, air fins for ventilation, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of suitable long each duly grouted in plaincement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate)or as manufacturer instruction and including notice board & Danger plate complete with all connectionsincoming / out goingcomplete all as directed by Engineer-in-charge. comprising of following accessories :-IN COMING(a) S&F MCCB 4 Pole 40 amps ,415 Volt of breaking capacity not less than16 KA (Ics=100 % of Icu)with adjustable thermal setting- 01 No for incoming.(b) AL Busbar 100 Amps current duly sleev insulated for set of 3 phase, 4 wire system- 01 Set.OUTGOINGS (a)MCB TPN 16- 32 Amp, 415 V, 10 KA, C-series - 02 Nos (b) Multifunctional meter Digital type showing V,A,F,Pf,KW,KWH inbuilt selector switch with CT coiles for three phase -0 1No.(c) LED Indicating Lamps R,Y,B- 1 Set Note for Item No. 136& 137 :- (i) Drawing of LT Panel/Feeder Pillar shall be approved by GE before placing order by the contractor.(ii) All types of spares such as gland, switchgears etc shall be included in over all cost quoted. |
| 137 | Supply, installation, commissioning and testing of factory made (CPRI approved) LT feeder Pillar Box of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the 01 No MCCB Of size 40 Amp,4 pole , 16 KA fixed thermal Megnatic Range, switch gear shall have be independent opening & 40 X5 mm sizeAl bus bar of suitable length 4 set of busbar with RYBN sleeves and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof.double door hinged type,both side openable, air fins for ventilation, panel shall be mounted on Iangle iron frame of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs suitable long each duly grouted in plaincement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate)manufacturer instruction and including notice board and danger plate complete inclduing all connections incoming / out goingcomplete all as directed by Engineer-in-charge. |
| 138 | Supply & erecting and installation ofsteel tubular swaged pole swan neck type of over all length 9.0 meter with 6mm thick CI plate having maximum tesnsile strength 430 kgf type 410 SP-30 confirming to IS 2713-1980 Part-II for fixing street light. A through hole 14mm dia shall be provided at height 2.5 mtr from base plate for inserting 2 core cable from junction box to top of the pole , hav-ing suitable dia of hole through the pole with nut & bolts for earthing arrangement , bottom portion of tubular steel pole having 139.7mm outer dia in 5 meter length 5.4mm wall thickness, middle portion having 114.3mm outer dia in 2 meter length 4.5 mm wall thickness and top portion 88.9 mmouter dia in 2 meter length, 3.25mm wall thickness wall thickness of pole wall respectively etc all as specified and shown on drawings including the followings:-(a) Excavation and earth work in any types of soil, returning filling, well ramming and disposal of surplus soil to a distance not exceeding 50 mtr from the starting points.(b)PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in foundation including form work.(c)PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping including form work.(d)PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in base.(e)Painting of poles externally with one coat of black bituminous paint (upto planting depth) and above plinth block concrete collar with two coat of aluminium paint over one coat of red oxide primer including preparation of surface including painting of 30 cm wide bands 3 Nos with synthetic enamel paint of ap-propriate colour in alternate layer upto height of 1.5 m above plinth block.(f) welding the suitable size and diaof pipe for fixing of street light if re-quired at site (g) Writing letter of figures (block Roman, Italic as Indian) with thick synthetic enamel paint of apprised shade not exc 5 cm height including numbering of pole.(h) Painting of coping with cement base paint all as directed.Note:- (i) This item consists of provi-sion of steel pole and work mentioned in para (a) to (h) only. All other connected work shall be measured and paid separately. |
| 139 | Supply and fixing GI pipe Bracket of 1.5 m long andmade out of40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable size for fixing of street light complete all as specified and directed. |
| 140 | Supply and fixing energy savingpressure die-cast aluminium IP 65 roadway luminaire with high power70 to 75 watt LED with a nominal system output of 120 lumen/watt(min) with PF not less than 0.9 as light source with toughened glass including two core flexible copper wire of 1.5 sqmm from ceiling rose to the connector of fitting, connection wires not to be more than 2.5m in length and made out of GI tubing 32/40 mm dia/suitable dia light grade bend to shape security light fitting with necessary MS clamp 25mm wide and 6mm in thickness in suitable length not more than 30CM and main length of pipe 1.5 mtr long with one code of anti-corrosive primer and two coats aluminium paint including nuts, bolts and washers complete all as specified and directed. |
| 141 | S&F Cable junction box made of FRP of size min 250x150x75 mm with 6-32 Amp MCB SPN and bus bar fixed along the wall/pole complete including mounting arrangements including removing the existing defective looping box all as specified and directed by the Engr-in-Charge. |
| 142 | Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5Sqmm 1100 Volt , draw through LT steel tubular polesfor connection to street light from junction boxcomplete all as directed by Engr- in- Charge.Note:- This item will be considered 1 run(1m (P)+1M(earth)+1 m(N) |
| 143 | M&L for Cable route indicator, duly engraved with \"LT CABLE 1100 VOLT\" on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, block of suitable size complete all as specified and directed. |
| 144 | Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for protection of LT Cables complete all as pecified and directed. |
| 145 | Supply & laying light grade GI Pipe of size 40 mm bore, ISI marked in trench for cable protection complete all as specified and directed. |
| 146 | Supply & fixing light grade GI Pipe of size 40 mm bore, ISI marked on pole/wall for cable protection complete all as specified and directed. |
| 147 | Supply & fixing of automatic street light control switch with infrared sensor based Nature Switch & voltage monitoring system (VMS). Nature switch operation should be based on Natural Light Lux level. Required illuminance level for Switching ON is < 30 Lux and for Switching OFF > 10 Lux. The Sensor should also have pert night operation facility of min. 4 hrs. to max 12 hrs. VMS should have Adjustable Over & Under Voltage Trip level and Protection against Phase Loss, Neutral Loss & Phase Reverse. The sensor & VMS along with suitable Power Contractor(s) and Incoming-Outgoing MCBs should be enclosed in a pole/wall mountable Enclosure made of Rust Proof, Electric Shock Proof, Terninate proof and FR grade SMC Junction box conforming to IP54. The circuit should also have provision for Manual Operation (i.e. sensor & VMS By-Pass option) with 3nos. Contractors, 3 nos. Incoming MCBs & 3 nos. Outgoing MCBs of 16-20 Amps each & Circuit wiring (Copper) of min. 10 sq.mm complete all as specified and directed. |
| 148 | S & F of LED Flood light fitting100 watt5000 K ,natural white , IP>65 ,grey powder coated die cast aluminium housing , inbuilt energy efficient surge protected electronic driver, with all connected accessories required for hanging of flood light such as nut bolt washer clamp etc complete all as specified and directed . |
| 149 | EXTERNAL WATER SUPPLYMaterial and labour forjointing Steel water tubing ISI marked of the 25 mm bore medium grade galvanised including tube fillings such as Tees, sockets bends elbows, Union, nipple etc with screwed and socketed Joints laid in trenches/under floor/under road or laid in floors complete all as specified. |
| 150 | Material and labour forjointing Steel water tubing ISI marked of the 50 mm bore medium grade galvanised including tube fillings such as Tees, sockets bends elbows, Union, nipple etc with screwed and socketed Joints laid in trenches/under floor/under road or laid in floors complete all as specified. |
| 151 | Supply and fixing cast iron air release valves with two air outlets,50 mm dia bore and fixing up in cast iron water supply mains complete all as specified and directed. |
| 152 | Material and labourforfixing of 25 mm dia Gun metal, globe or gate valve with iron wheel head, Screwed both end for iron pipe conform to IS 778-1984 complete all as specified and directed. |
| 153 | Material and labourforfixing of 50 mm dia Gun metal, globe or gate valve with iron wheel head, Screwed both end for iron pipe conform to IS 778-1984 complete all as specified and directed. |
| 154 | Construction of fly ash brick masonry valve pit chamber of size 900 mm X 900 mm X 900 mm (internal dimensions) including necessary excavation & earth work,100 mm thick PCC (1:4:8) type D-2 as in foundation, 230 mm thick fly ash brick work in cement mortar (1:4), 12 mm thick rendering in cement mortar (1:4)on internal surface of valve pit and mild steel sheet cover of 6 mm thick and angle iron of size (50 x 50 x 6) mm frame around of valve pit, sheet welded on all four corners, locking arrangement with pad lock of size 50 mm brass, 6 levers and in duplicate key (Make - Godrej or equivalent make as approved by GE complete) including two coat of approved synthetic enamel paint over one coat of red oxide primer on prepared steel surface complete all as specified and directed. |
| 155 | COMMON ITEMSSurface excavation in soft /loose soil depth not exceeding 30 cm and average 15 cm and get-ting out soft / loose soil complete all as specified and directed. |
| 156 | Addfor every 3cmor part thereof above 15cm average depth (for additional 15cm deep) complete all as specified and directed by Engineer-in-charge |
| 157 | Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, laying of pipes & cable etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 158 | Returning filling in with approved excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. |
| 159 | Removal of excavatedsoil to a distance n.exc 50 mtr and depositing where direct at a level n. exc 1.5 mtr above the starting point complete. |
| 160 | Removing excavated material (soil) to a distance exc 1.5 Km but not exc 5 Km and deposited where directed at a level n.exc. 1.50 m above the starting point complete all as specified and directed |
| 161 | M&L for cement concrete Type E-2 1:5:10 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 162 | M&L for Providing & Laying at or near ground level factory made kerb stone of M-25 graded cement concrete in position to the required line, level and curvature, jointed with Cement mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shall not more than 5 mm), including making drainage opening wherever required complete all as specified and directed by engineer in charge. |
| 163 | M&L Hardcore of gauge n exc. 63 mm, stone boulder deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfacecomplete all as specified and directed. |
| 164 | M&L for preparation of newly concrete surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 165 | M&L for Formwork to sides of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam; and similar work; vertical or to batterfor rough finished flat surfaces of concrete complete all as specified and directed. |
| 166 | M&L for TMT bar 10mm dia & over cut to length bent to shape as required including cranking, bending .hooking end and binding with steel wire annealed not less than 0.9mm or securing with dips complete all as specified and directed. |
| 167 | M&L for TMT bars 06 to 08 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and directed |
| 168 | M&L for cement concrete type C-2 1:3:6 (using 40mm graded stoneaggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 169 | M&L for brick work burntbricks old size straight or curved on plan exc 6.0mtr mean radious built in CM 1:4 complete all as specified and directed. |
| 170 | M & L forBrickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed |
| 171 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete as specified. |
| 172 | M&L for Rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surface mixed with liquid water proofing compoundas per manufacturer’s instructions, finished even and fair complete all as specified and directed.(Note : WPC shall be measured & paid separately) |
| 173 | Supply only water proof compound complete all as specified and directed. |
| 174 | M & L Extra over for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified & directed.NOTE:- Inner girth only to be measured) complete all as specified. |
| 175 | M&L for providing, cement concrete 1:2:4,type B-0 (using 12.5mm graded stoneaggregate) as in roof kerbs or mud stops, rounded or chamfered on edges , incopings, kneelers, apex stones, bed plates, slightly rounded or chamfered angles and throating,and hauching of manhole complete all as specified and directed. |
| 176 | M&L for formwork to sofit of slab n.exc 200 mm thick for horizontal sloping such as floor slab, roof or similar work, fair finished surfaces complete all as specified and di-rected. |
| 177 | M&L for Reinforced cement concrete (Design Mix) M-25 using 20 mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc; basement slabs under-reamed pillars and mass concrete etc. complete all as specified and di-rected.(Note: Steel reinforcement shall be measured & paid separately) |
| 178 | M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade \"A\" including necessary cutting of C as required complete all as specified and directed |
| 179 | M&L earthing complete with galvanized earth plate electrode 600 x 600 x 6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level) with top edge of the plate not less than 1.50 M below normal ground level , con-nected to and including galvanized steel wire 4mm dia as earth lead soldered and rivetedto earth plate by means of nuts, bolts, check nuts & washers, of galvanizediron or steelwith connected to test point and testing on completion including 15mm GI light grade pipe for earth leadprotection from earth point to earth plate, including provnadequate quantity of charcoal dust mixed with35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth platewith 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire meshwith and includingall necessary excavation& earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009and as directed.Note : (i) Main earthing lead and protection pipe from earth plate electrode to test point upto length of 7.50 mtr shall deem to be included in the unit rate quoted by the tenderer against this item.(ii) GI protection pipe and earth-ing strip beyond 7.5 mtr long shall be measured and paid seperatly .(iii) Test result should be less than 1 ohms or satisfaction of user.(iv)Coal and salt not less than 60 kg and 110 kg respectively in each earthing |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
