|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. D.A.R No-15.23.1 |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (D.A.R No-15.56) |
| 3 | Providing and fixig ISI marked flush door shutters conforming to IS : 2202 (Part-1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matches commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shulters. 30 mm thick including ISI marked Stainless Steel bolt hinges with necessary. (DAR No-9.21.2) |
| 4 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood. DAR No- 9.27.1.1.1 |
| 5 | 12 mm cement plaster of mix: 1:4 ( 1 cement 4 coarse sand) (DAR No- 13.4.1) |
| 6 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. DAR No- 11.40 |
| 7 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.( dsr. 8.31) |
| 8 | Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge Internal work-Exposed on wall. 20mm nominal outer dia Pipes. (DAR No-18.7.2) |
| 9 | Providing and fixing SWR pipes as per IS: 13592 110mm dia for drain & sewer system with trenching refilling & testing of joints complete including labour T&P etc. |
| 10 | making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. D.A.R No-4.17 |
| 11 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. D.A.R No- 17.2.1 |
| 12 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for hold fasts embedding hold fasts in cement concrete blocks of size 15x10x10 cm with cement concrete 1:3:6 ( 1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size). painting two coats of approved wood preservation to sides of chowkhats and making good the damages to wall and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. Door chowkhats DAR No- 14.2.1 |
| 13 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with bolt hinges of required size with necessary screws, excluding pancliling which will be paid for separately all complete as per direction of Engineer-in-charge. (Note- Bolt hinges and necessary screws shall be paid separately). 35 mm thick shutters (D.A.R No-9.5.1.1) |
| 14 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement morter 1:2 (1 cemnt;2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindance E.C. 20% with 1% concentration. D.A.R No- 2.35.3 |
| 15 | Providing and fixing C.P. Brass Two way bibcock heavy code No-0257 L&K or Equivalent make including supply of all material, labour T&P etc. complete. |
| 16 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore dsr 18.53.1 |
| 17 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. DSR No- 17.33 |
| 18 | Providing and fixing C.P. brass OVER HEAD shower with arm heavy quality L&K 0668) with 15mm inlet:100 mm diameter |
| 19 | Providing and fixing C.P. Brass Two way angle valve 15 mm dia ( L &K 0327 make) with wall flange including supply of all material, labour T&P etc. complete. |
| 20 | Supply and fixing C.P. Health Faucet with 8mm Dia 1.00 mtr. Long Flexible tube & wall hook L&K Make including supply of all material, labour T&P etc. complete. |
| 21 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (D.A.R No-17.31) |
| 22 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. D.A.R No-13.80 |
| 23 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour. Old work (one or more coats). (D.S.R No-13.81.1) |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work. D.A.R No-13.99.1 |
| 25 | Supply of Salwood wrought framed Single rebates and fixed including simple moulding straight work as in Chaukhat frame including supply of all materials, labour, T&P etc. required for proper completion of work. |
| 26 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. D.A.R No- 15.60 Please Enable Macros to View BoQ information |
