|
| 1 | Taking down chowkhat or frame without taking off shutter from frame n.exc 1.5 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkhat or frame without taking off shutter from frameexc 1.5and n.exc 4 Sqm each complete all as specified and directed. |
| 3 | Taking down shutter only exc1 Sqm and n.exc 2 Sqm each and removing from the site complete all as specified and directed. |
| 4 | Taking down shutter only exc 2 Sqm each and removing from the site complete all as specified and directed. |
| 5 | Supply & Fix 35mm thick factory made second class hard wood plain, framed , panelled shutter(2 panel) with lock rail and panel commercial ply or 12 mm veneered particle board of 9 mm B.W.P commercial veneering on both faces.The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 6 | Supply & Fix 30mm to 35 mm thick square sizevision panelsFlush shutters, solid core construction, with particle boardcore and plywood face panels, decoratedface venner with lippingon both sides (Supply & Fix Glass measured seperately) for hospital ward purpose complete all as specified and directed. |
| 7 | Taking down shutters of any description exc 1 Sqm & not exc 2 Sqm for fixing in same opening inceasing, adjusting and refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed. |
| 8 | Supply & Fix 100mm size, butt hinge extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified & directed. |
| 9 | Supply & Fix 300 mm long Aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed complete all as specified and directed. |
| 10 | Supply & Fix150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 11 | Supply & Fix 150mm size aluminum handles, cast type anodised complete all as specified & directed. |
| 12 | Supply & Fix floor door stopper 150mm sizeof aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified & directed. |
| 13 | Supply & Fix solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing all as specified and directed. |
| 14 | Supply & Fix Factory made solid panel Factory made solid PVC moulded door shutter, 28mm to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete including all neccesary fittings all as specified and directed. |
| 15 | Supply & Fix 75mm long Butt hinges, extruded aluminium alloy with galvanised steel hing pin, anodised and fixed complete all as specified and directed. |
| 16 | Supply & Fix 125 mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 17 | Supply & Fix 125mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 18 | Material & Labour for preparation new wooden surfaces of any description over 10 cm widthor girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed. |
| 19 | Material and Labour for powder coated aluminium door made out of hollow extruded aluminium section as mentioned below:Each door having 02 Nos disc or D type handels, 02 Nos aluminium tower bolts 200 mm size one aluminium sliding door bolt or 250mm size, one brass mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make Sandhu/TITZ) shutter to be partly glazed with and including 5 mm thick tinted glass and partly panelled with and including 12 mm thick pre laminated particle board fixed with glazing clips, rubber beading/gasket anodized aluminium beading screws complete.Chowkhat Frame : 101.60mm x 44.45mm x 1.55 mmShutter verticle/stile: 85.00mm x 44.45mm x 1.56 mm Shutter middle rail : 83.50mm x 44.45mm x 1.54 mmShutter top and bottom rail : 110mm x 44.45mm x 1.54 mmMake :- (i) Anodized aluminium section : Jindal/Hindalco, Indalco (ii) Particle board : Novapan, Duratuff(iii) Glass : Saint, Gobain, Modi Guard, TATA |
| 20 | Material and Labour for powder coated aluminium sliding windows having three Nos of tracks including one guazed shutter for mosquito proofing including stainless steel wire cloth of 0.36 mm nominal dia and average aperature of 1.4 mmand two Nos of glazed shutters including 4mm thick coloured glass and aluminium section weight not less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete all as specified and directed. |
| 21 | Supply & Fix in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and nut bolt, fixed complete all as specified and directed. |
| 22 | Hacking out old broken glass (any size, quality or description) from aluminium frames, glazing with putty or beads complete all as specified and directed. |
| 23 | Supply & Fix 4mm thick sheet glass, ordinary quality and glazingn exc 0.5 Sqm in each pane including necessary cleats, glazing clips rubber packing, anodised aluminium snap beading, screws complete all as specified and directed. |
| 24 | Supply & Fix 4mm thick figured glass pin headed type and glazing not exc 0.5 sqm in each pane including necessary cleats, glazing clips rubber packing, anodised aluminium snap beading, screws complete all as specified and directed. |
| 25 | Supply & Fix in repair 4 levers mortice lock brass vertical type 100mm sizefor aluminium doorswith triplicate key etc complete all as specified and directed. |
| 26 | Supply & Fixin repairs aluminium anodised brakets for curtain rods complete all as specified and directed. |
| 27 | Supply & Fix in repairs 20mm dia aluminium anodised curtain rod fixed to brackets, stops, rollers etc complete all as specified and directed. |
| 28 | Supply & Fix in repairsDouble action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 29 | Supply & Fix in repairs aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 mm to 1000 mm in width and of weight between 61 kg to 80 kg and fixedcomplete all as specified and directed. |
| 30 | Polishing of old existing Kota stone flooring i.e, cutting , grinding, joints pigment filling and polishing to get mirror finish complete all as specified and directed. |
| 31 | Supply & Fix in repairs 15 mm bore bib taps cast copper alloy chromium plated with crutch or butterfly handle fancy type screwed down screwed foriron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 32 | Supply & Fix in repairs 15mm bore Stop valves, cast copper alloy, fancy type, chromium plated with long or short shank and cup (concealed type) screwed down high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 33 | Supply & Fix in repair shower rose chromium plated 120 mmdia with or without swell joints including fixing to steel pipe of 15 mm bore complete all as specified and directed. |
| 34 | Supply & Fix in repairs 15mm Brass CP wall mixer tap including provision for overhead shower formixing \"Hot or Cold\" water screweddown foriron pipe complete all as specified and directed. |
| 35 | Supply & Fix in repairs PVCflushing cistern low level white 10 ltrs capacity valveless, syphonic action typeincluding inlet, ball valve, float, handle and brackets etc complete all as specified and dierectd. |
| 36 | Supply & Fix in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe,anti-syphonage pipe complete all as specified and directed. |
| 37 | Taking down old rain water pipes and SWR pipes any size or pattern, including all fittings, heads, shoes, bends, swan-necks etc including cleaning or refixing or removal to store complete all as specified and directed. |
| 38 | Supply & Fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 75 mm with PVC clamps and saddles complete all as specified and directed. |
| 39 | Supply & Fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 110 mm with PVC clamps and saddles complete all as specified and directed. |
| 40 | Supply & Fix PVC (SWR) bends of any radius with access door bore of pipe 75 mmcomplete all as specified and directed. |
| 41 | Supply & FixPVC (SWR) bends of any radius with access door bore of pipe 110 mmcomplete all as specified and directed. |
| 42 | Supply & Fix PVC (SWR)branch piece double (Double Y) equal or unequal with access door bore of pipe 75 mm complete all as specified and directed. |
| 43 | Supply & Fix PVC (SWR)branch piece double (Double Y) equal or unequal with access door bore of pipe 110 mm complete all as specified and directed. |
| 44 | Supply and Fixing in repair 18mm/19mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work including teakwood lipping 6mm thick fixed with nails fixed for cub board shutter.etc complete all as specified and directed. |
| 45 | Supply and Fixing in repairs 40mm width continuous (paino) hinges, mild steel, bright finishor electrogalvanised complete all as specified and directed. |
| 46 | Dismantling wall and ceilihg boards (Fiber pulp, insulation etc or insulation boards any thickness including cover fillets complete all as specified and directed. |
| 47 | Material and labour for PVC interlocking wall panelling 5mm to 7mm thick of surface finish natural wooden finish shed(in minimum size 1200mm hight x 300mm wide). Panel is to be fixed on framework with screw fixed horizontal or vertical to wall at every 750mm with centre & edge bracket in tongue & groove system on framework. if required the cavity of framework should be inserted with rock wool with 48 kg/M3 and 50mm thick density and alongwith all accessories and direction of Engineer in charge, including required flashing, U shape groove and other required accessoriescomplete all as specified and directed by Engineer-in-Charge. Make and sample as approved by GE/Engineer-in-Charge. |
| 48 | Material and Labour for suspended false ceiling system using chicago metalic (E Grid) exposed suspended system, grid section size 600mm x 600 mm, comprising ofGI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick(Thickness comprising of GI/0.4 + PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick and wall angle 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI/0.4 + PPPCGS /0.3 mm & weight of Tee of 0.195 kg for 600mm length) and wall angle of diamensions 22.2mm x 22.2mm x 3050 mm x 0.65mm thick (Thickness comprissing of GI/0.35 + PPPCGS/0.3mm & weight of angle 0.70Kg for 3050mmlength) with grid system duly suspended with 4mm dia GI wire hangersfixed with steel-through fasterner from purlin of the roof complete all as specified and directd |
| 49 | Providing and fixing 12 mm thick semi perforated calcium silicate tile size600X600 mm complete all as specified and as directed. |
| 50 | Material & Labour for Wall paper -Wall coverings in repair to be made from vinyl (PVF), coated with plastic; rustic metalic/ Natural Finish/ Cork & Mica Finish/ wall texture finish; to be colourfast and washable with dust repellent property. Application of wall paper as per approved sample. Rate to include surface preparation abd application as per manufacturers standards including dismantling of old wallpaper complete all as specified and directed. |
| 51 | Demolitionof brick work or stone / boulders masonry built in cement mortar or cement lime mortar complete all as specified and as directed. |
| 52 | Demolition of Concrete of any description and in any position complete all as specified and as directed. |
| 53 | Material and Labour for fly ash brick with modular fly ash brick, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed. |
| 54 | Material and Labour for cement concrete 1:3:6, type C-1, (20mm graded stone aggregate) in coping including necessary formwork complete all as specified and as directed. |
| 55 | Material and Labour for rendering 15mm thick in two layers in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 56 | Material and Labour for cement concrete 1:3:6, type C2, (40mm graded stone aggregate) in surface channels and drains complete all as specified and as directed. |
| 57 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred / stopped end etc complete all as specified and as directed. |
| 58 | Demolition of Stone slabs and tiles of any description or thickness laid bedded and pointed in cement mortar in floors, aprons etc. complete all as specified and as directed. |
| 59 | Material and Labour for cement concrete 1:4:8, type D-2, (40mm graded stone aggregate) 75 mm thick sub base or similar items complete all as specified and as directed. |
| 60 | Supply and Fixing Pre Polished Chequered cement concrete tiles glossy and rubburised finish coloured 30cm x 30cm x 25mm thick set jointed and pointed in near cement slurry in floors including 15mm thick screed bed in CM 1:6 under tiles complete all as specified and as directed. |
| 61 | Material and Labour for Machine pressed precast cement concreteinterlocking paver blocks,coloured, glossy finish with any shape and size conforming to IS-15658-2006, 60mm thick, M-35 grade,complete all as specified and as directed. |
| 62 | Material and Labour for Sand filling under floors or in foundations including watering and consolidation and well ramming as required complete all as specified and as directed. |
| 63 | Material and Labour for preparation of existing treated old surfaces of chequred tile,interlocking tile or stone floor etc and applying two coats of floor paint ( Make : Indigo or equivalent ) of specified tint complete all as specified and as directed. |
