|
| 1 | 11 KV LINE ON 13 M H-BEAM WITH DOG CONDUCTOR MAXIMUM SPAN 40 MTRS FOR URBAN AREA(DCSS) |
| 2 | 11 KV SINGLE POLE CUT POINT IN 13 M H-BEAM FOR STRAIGHT LINE & ANGLE UPTO 45° FOR URBAN AREA |
| 3 | 11 KV D.P.STRUCTURE ON H-BEAM 13 MTR LONG FOR STRAIGHT LINE FOR DCSS |
| 4 | L.T.LINES 3 PHASE 5 WIRE ON RS JOIST SUPPORTS USING AERIAL BUNCHED XLPE CABLE(III) 3X95 + 1X16 + 1X50 SQ MM. (INSULATED NUETRAL MASSENGER)(SPAN OF 40 MTR) |
| 5 | 11 KV STRAIN SET 45 KN T&C PORCELAIN DISC INSULATOR WITH HARDWARE |
| 6 | 11 KV GUARDING CHANNEL 75X40X6 MM |
| 7 | 1-BOLT 16 MM |
| 8 | GI WIRE 8 SWG (9.8 MTR/KG) FOR GUARDING |
| 9 | GI WIRE 6 SWG (8 MTR/KG) FOP GUARDING |
| 10 | L.T DISTRIBUTION BOX SUITABLE FOR 200 KVA TRANSFORMER WITH MCCB |
| 11 | DC CROSS ARMS 8 12.4 METER) CENTRE TO CENTRE 100X50X6 MM CHANNEL |
| 12 | H BEAM CLAMPS 65X8MM FLAT |
| 13 | 11 KV 45 KN DISC T&C COMPOSITE POLYMER LONG ROD INSULATOR |
| 14 | 11 KV STRAIN HARDWARE (T&C TYPE) FITTINGS |
| 15 | D.O.MOUNTING CHANNEL 75X40X6 MM |
| 16 | BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT |
| 17 | DO FUSE UNIT 11 KV POLYMER |
| 18 | 11 KV LA POLYMER TYPE GAPLESS / METAL OXIDE 9 KV 5 KA LINE TYPE |
| 19 | TRANSFORMER MOUNTING CHANNEL 100X50X6MM |
| 20 | TRANSFORMER BELTING SET 50X50X6MM ANGLE WITH TWO CROSS FIXING CHANNEL |
| 21 | AAAC RABBIT CONDUCTOR 0.05 SQ.NCH (55 SQ.MM. AL.EQ.) |
| 22 | HT BI-METALLIC CLAMP FOR DTR |
| 23 | BI-METALLIC CLAMPS SUITABLE FOR 12MM DIA STUD |
| 24 | MS BOLT WITH NUT |
| 25 | XLPE LT 1- CORE ALUMINIUM UNARMOURED 300 SQMM CABLE |
| 26 | 11 KV AB SWITCH THREE PHASE 600 AMP TP GANG OPERATED |
| 27 | H-BEAM 13 METER 152 X 152 MM 37.1 KG/METER |
| 28 | BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT |
| 29 | 11 KV SINGLE POLE CUT POINT 100X50X5 MM CHANNEL SIDE CROSS ARMS |
| 30 | SIDE CROSS ARMS 75X40X6MM |
| 31 | EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE |
| 32 | 11 KV 5KN PIN COMPOSITE POLYMER INSULATOR |
| 33 | ACSR DOG CONDUCTOR 0.10 SO. INCH (100 SQ.MM. AL.EQ.). (6/4.72+7/1.57 MM) |
| 34 | JOINTING SLEEVES (ALUMINIUM) FOR DOG CONDUCTOR |
| 35 | STAY SET 20 MM COMPLETE |
| 36 | STAY GI WIRE 7/4.00 MM. (7/8 SWG) |
| 37 | H.BEAM CLAMPS 65X8MM FLAT |
| 38 | STONE BLOCK/RCC BASE PLATE SIZE 450X450X75 MM (2 NO PER STAY AND 1 NO FOR POLE) DRG. NO. DISCOM/EZ/ 47 & 48 |
| 39 | CONCRETING OF H-BEAM/ RAIL POLE @ 0.94 CMT. PER POLE INCLUDING MUFFING) |
| 40 | CONCRETING (1:3:6) OF STAY @0.3 CMT PER STAY (20MM) |
| 41 | RED-OXIDE PAINT |
| 42 | ALUMINUM PAINT |
| 43 | ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG) |
| 44 | DANGER BOARD ENAMELED 11 KV |
| 45 | ALUMINIUM BINDING WIRE AND TAPE |
| 46 | MS BOLT WITH NUT 16X200 MM |
| 47 | MS BOLT WITH NUT 16X200 MM |
| 48 | ALUMINIUM PAINT |
| 49 | R S JOIST 9.3 METER 175X85MM |
| 50 | TENSION CLAMP FOR DEAD END FOR LT A.B CABLE |
| 51 | SUSPENSION CLAMP FOR LT AB CABLE |
| 52 | CLAMPS FOR NEUTRAL |
| 53 | PIERCING CONNECTOR TYPE- 1.1P/3P (MAIN 16-50SQMM TAP- OFF 16-50SQMM |
| 54 | LT XLPE AIR BUNCH CABLE 3X95 SQMM + 1X50 SQMM INSULATED NEUTRAL CUM MESSENGER+1X16 SQMM |
| 55 | STAY SET WITHOUT STAY WIRE 16 MM. (PAINTED) |
| 56 | STAY WIRE 7/3.15 MM.(7/10 SWG) |
| 57 | STAY CLAMP A TYPE FOR RS JOIST 175X85 MM-7X3.5 INCH- |
| 58 | STONE BLOCK/RCC BASE PLATE SIZE 450X450X75 MM (2 NO PER STAY AND 1 NO FOR POLE) DRG. NO. DISCOM/EZ/ 47 & 48 |
| 59 | CONCRETING (1:3:6) OF FOP POLES @ 0.3 CMT. FOR POLE (BASE PADDING + MUFFING) |
| 60 | CONCRETING (1:3:6) OF STAY @ 0.2 CMT. PER STAY (16MM) |
| 61 | M S BOLT WITH NUT 16X200 MM |
| 62 | EARTHING COIL OF 115 TURNS OF 50 MM DIA AND 2.5 MTR LEAD OF 4.0MM G.I WIRE |
| 63 | POLE MOUNTED DEEP DRAWN METAL LT DISTRIBUTION BOX FOR AB CABLE FOR ONE INCOMING EIGHT OUTGOING 1-FACE CIRCUIT |
| 64 | POLE MOUNTED DEEP DRAWN METAL LT DISTRIBUTION BOX FOR AB CABLE FOR ONE INCOMING FOUR OUTGOING 3-FACE CIRCUIT |
| 65 | CONDUCTOR ACSR SCRAP |
| 66 | INSULATED WIRE/CABLE ALUMINUM SCRAP ABOVE TO 16 MM |
| 67 | VARIOUS SIZE PIECE RS JOIST SIZE |
| 68 | RAIL POLE |
| 69 | MISC IRON SCRAP |
| 70 | SUPERVISION CHARGES |
