|
| 1 | Supply, Install, Testing and commissioning of suspended rope platform (DRP) of capacity 800 Kgs, platform size (L x W), ((2.5M +2.5M+1.5M+1.0M)X 0.76M), Platform weight 850Kg including hoist, safety lock control Motor capacity 1.8 kwx2,3 phase 415v,Braking Torque 15NM,Hoist speed 8 to 11 Mtr/min,Lifting force 5 KN,Height adjustment 1000Kg(40 NosX25Kg) safety lock tilt proof safety lock.,safety :Stainless steel wire rope,corrosion resistance and rotation resistance ,manual brake release lever in case of power failure,with top and bottom limit switch complete all as specified and directed by Engr-in-Charge.Make: TRIDENT INDUSTRIESModel No: ZLP-SRP-800 or equivalent. |
| 2 | M&L forXLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 11000 Volts grade with stranded aluminium conductor of size 150 Sq. mm 3 core, including taking down old unserviceable cable complete, all as specified and as directed by Engr-In-Charge. |
| 3 | Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 11000 Volts grade with stranded aluminium conductor of size 120 Sq. mm 3 core, including taking down old unserviceable cable complete, all as specified and as directed by Engr-In-Charge. |
| 4 | Supply and lay cable XLPE installed screened PVC bedded, galvanised steel or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sq. mm 3.5 core, including taking down old unserviceable cable complete, all as specified and as directed by Engr-In-Charge. |
| 5 | M & L forexcavationin trench ,not exceeding 1.5 mtr wide and not exceeding 1.5mtr in depth for laying of cable /pipe etc in soft/loose soilcomplete all as specified and directed by Engineer-in-charge. |
| 6 | M & L for returning, filling in , including spreading,levelling, watering and well ramming in layer not exceeding 25cm complete all as specified and as directed |
| 7 | M & L for removal of excavated material not exc. 50m and depositing where at level not exceeding 1.5m above the starting point complete all as directed by Engineer-in-Charge. |
| 8 | Supply and spreading river sand in trenches as cushioning to under ground cable on top and bottom of cable and levelling & ramming, complete all as specified and as directed. Note:- punned thickness will be measured. |
| 9 | Supply and laying un-reinforced precast concrete cable cover, class HV, type 1,flat, size 300mm x 180 mm x 40 mm complete all as directed by Engineer-in-Charge. |
| 10 | Supply and laying un-reinforced precast concrete cable cover, class LV, type 1,flat, size 250mm x 150 mm x 40 mm complete all as directed by Engineer-in-Charge. |
| 11 | Supply and fix cable jointing kit for 11 KV (Earthed) grade cable for end termination, cold shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured. AI conductor cable of size 120 sqmm to 180 Sqmm. |
| 12 | Supply and fix light grade galvanised tubes of 100 mm bore laid in trenches with all fittings complete all as specified and directed by Engineer-in-Charge including taking down old unserviceable . |
| 13 | Supply and Fix cable jointing kit for 11KV(Earthed) grade cable forstraight through cold shrink type complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size120 to 185 sqmm core complete with treating of cable make ready for jointing including taking down old unserviceable all as specified and as directed. |
| 14 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materialsfor taking creditand making good disturbed surfaces of walls, floors, etc. |
| 15 | Material and labour for point wiring (light/ fan/ socket) with 1.5 Sq. mm (nominal area) PVC insulated unsheathed cable with copper conductor, single core multi stranded 1100 V graded confirming to IS 694 : 1977 drawn in PVC conduit including provision of 20mm dia rigid PVC conduit as per (part-1 1983) with conduit accessories including terminal boxes fabricated out of 2 mm thick MS / modular PVC sheet fitted with 3 mm thick Hylam/PVC sheet top cover for fixing switches including 1.5 Sqmm on single core PVC unsheathed cable with multi stranded copper conductor as earth continuity conductor and connected to common earth dolly at existing wall/surface and concealed etc. and make good the disturbed surface as per existing all as directed by engineer-in-charge. |
| 16 | All as per item No.15 but with 1.5 sqmm for 5 Amp Socket outlet on independent board with other switches,all as specified and directed. |
| 17 | All as per item No. 15 above but drawn in casing capping with 1.5sqmm. for one light point controlled by two 2 way switch all as specified and directed. |
| 18 | M&L forModular switch 1 way 6A, 1 module all as specified and directed,including taking down old unservicable |
| 19 | M&L forModular switch 1 way 16A, 1 module all as specified and directed including taking down old unservicable. |
| 20 | M & L for Switch piano, flush type single pole, one way 6 Amp complete all as specified and directed includingtaking down old unservicable. |
| 21 | All as per item No.20 but 16 Amp complete all as specified and directed includingtaking down old unservicable. |
| 22 | M & L for Switch socket combination 2 in 1, 3 pin, 6 and 15 Amp flush type universal complete all as specified and directed includingtaking down old unservicable. |
| 23 | All as per item No.22 but3 pin 6A complete all as specified and directed |
| 24 | M & L for buzzer ,Ding Dong AC.230 volts, single pole complete all as specified and directed includingtaking down old unservicable. |
| 25 | M & L for Multi Music type Bell complete all as specified and directed includingtaking down old unservicable. |
| 26 | S & F cover plate with frame, 3 module,colour as per site requirementcomplete all as specified and directed includingtaking down old unservicable. |
| 27 | All as per item No.26 above but 6 module complete all as specified and directed includingtaking down old unservicable. |
| 28 | All as per item No.26 but 8 module complete all as specified and directed includingtaking down old unservicable. |
| 29 | S & F stepped type electronic fan regulator flush type including taking down old one complete all as specified and directed by Engineer –in –Charge. |
| 30 | M & L for valve chamber including excavation in any type of soil, spreading, levelling and refilling etc. PCC (1:4:8) type D2 for foundation, brick work of one brick thick wall in CM (1:4) including internal plaster 15 mm thick in CM (1:4) external plaster 15 mm thick (1:4) and providing coping in PCC (1:2:4) type B1, angular iron frame of size 50 x 50 x 6 mm with 6 mm thick MS plate cover complete including locking arrangements and having FRP coating of 2 mm thick on both inside and outside surfaces complete as specified for the size of chamber 1000 mm x 1000 mm x 600 mm complete all as specified and directed. |
| 31 | Supply and fixing of Sluice Valve Class PN 1.6 of size 80 m dia including steel spindle with head, iron wheel, gland with gland packing, etc. and necessary fixing arrangement like rubber gasket etc., including taking down old one complete all as specified and directed by Engr-in-Charge. |
| 32 | Supply and fix fire hydrant landing valve, type ‘B’ (Single head outlet) suitable for 63 mm bore of size confirming to IS-5290 including provision of 25mm dia valve for connecting hose reel complete all as specified and as directed by Engineer-in-Charge includingtaking down old unservicable. |
| 33 | M & L fire hose box made of 18 guage MS Sheet 800mm X 600mm X 250mm with double dor with 4 mm thick glasses and door frame made of 16 guage MS sheet painted fire red out side and brilliant white inside yard complete all as specified and as directed by Engineer-in-Charge includingtaking down old unservicable.. |
| 34 | Supply and fix 63 mm dia 15 mtr long RRL hose, type ‘A’ confirming to IS-636 complete with male and female coupling conforming to IS-903 including branch pipe, nozzles spanner etc, complete all as specified and directed. |
| 35 | Supply and Fix MS ERW pipes of 80 mm dia complete all as specified and directed by Engr-in-Charge includingtaking down old unservicable. |
| 36 | Supply and Fix MS ERW pipes of 65 mm dia complete all as specified and directed by Engr-in-Charge includingtaking down old unservicable. |
| 37 | M&L for branch pipe gun metel 63 instataneous inlet, made threaded outlet, 15 mm bore nozzle short |
| 38 | S & F Ball brass valves 25mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-In-Charge. |
| 39 | M&L forHose reel drum 30 mtr length including fitting complete all as specified and directed. |
