|
| 1 | M&L for attending day to day complaints for inspecting / checking of \"No supply\" complaints such as loose connection, burnt wire etc where no material is involved, complete all as specified and directed.Note :-(i) Minor materials such as insulation tape and minor wires etc shall deemed to be included under this item.(ii) Any item under which material that is to be replaced shall be measured and paid seperately under respective items. |
| 2 | Taking down aluminium / copper point wiring with surface / concealed stove enamelled steel / PVC conduit or wooden batten (light, fan, socket or power) including sunk in cast iron / pressed steel terminal boxes such as switches, ceiling roses, lamp holders, sockets, regulators, call bell, light fitting any sketch etc and making good the disturbed surfaces of walls, floors etc, complete all as specified and directed. |
| 3 | M & L for concealed Point wiringfor light points with PVC insulated unsheathed FRLS two run of 1.5 Sqmm multi stranded copper conductor cable 1100 volts grade & one run of 1.5 Sq mm multi stranded copper conductor cable as continuous earth wire drawn in and including PVC conduit not less than 19/20 mm dia with all fittings, sunk in MS Pressed steel terminal boxes of suitable depth and 1.6 mm thick (duly painted with two coat of anti corrosive paint outsite andAluminium paint inside) with top cover 2.8 mm thick Hylem sheet cover for mounting of switches / sockets and fan regulators etc including cutting, chasing and making good wall / ceiling surfaces to disturbed surfaces, complete all as specified and directed. |
| 4 | All as per item No. 3 above but with socket outlet 5 Amps controlled by one switch on the same board. |
| 5 | All as per item No. 3 above but with socket outlet 5 Amps controlled by one switch on independent board. |
| 6 | All as per item No. 3 above but with call bell point, one point controlled by one switch. |
| 7 | All as per item No. 3 above but with 2.5 sq mm for one 15 Amps socket outlet on independent board and 2.5 sqmm PVC insulated multisranded copper conductor cable as continuous earth wire. |
| 8 | Supplyandfixing Switch piano type one way 5 amps 240 volts, complete all as specified and directed. |
| 9 | Supplyandfixing Bell push flush type5 amps 240 volts, complete all as specified and directed. |
| 10 | Supplyandfixing Socket outlet 5 pin 5 Amps flush type, complete all as specified and directed. |
| 11 | Supplyandfixing for Switch piano flush button single pole one way 15 amps 240 volts, complete all as specified and directed. |
| 12 | Supplyandfixing for Socket out let 2 in 1, 6 pin, 5 and 15 amps multi purpose flush type, 230 volts, complete all as specified and directed. |
| 13 | Supplyandfixing electronic fan regulatorstep, 250V flush type on the exiting phenolic laminated sheet etc, complete all as specified and directed. |
| 14 | S&F Modular switch flush type, one way 5 Amp, complete all as specified and directed. |
| 15 | S&F Modular Bell push, flush type, 5 amp, complete all as specified and directed. |
| 16 | S&F Modular socket outlet 2 in 1, 5 pin, 6 Amp, complete all as specified and directed. |
| 17 | S&F Modular Switch 15 amp flush type, complete all as specified and directed. |
| 18 | S&F Modular Socket outlet 2 in 1, 6 pin, 6 and 16 Amp, complete all as specified and directed. |
| 19 | S&F Modular Electronic fan regulator 2 module, 240 Volt, complete all as specified and directed. |
| 20 | S&F ceiling rosesurface bakelite 3 terminals, complete all as specified and directed. |
| 21 | S&F Lamp holder PVC/ Polycarbonate insulated body with back plate for angle/batten fittings, complete all as specified and directed. |
| 22 | Supply & fixing in replacement LED light fitting, 20 W, 4 ft long 230V, Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with all accessories internally pre-wired, complete all as specified and directed. |
| 23 | Supply & fixing in replacement LED light fitting 2 Feet long 10 Watt LED Battenlight for mirror and as wall light application, complete all as specified and directed. |
| 24 | Supply & fixing in replacement recess mounting LED slim ceiling light with extruded aluminium housing and milky diffuser with 36W, 2\"X2\" (600X600X11mm) LED slim panel, complete all as specified and directed. |
| 25 | Supply & fixing in replacement LED flat Bulkhead fitting 10 watt complete and fixing to wall / celing including fixing arrangement with clamps/ scrue/nuts/ bots /washers etc and connecting, complete all as specified and directed. |
| 26 | Supply & fixing in replacement of building security light fitting 35 W LED New generation Energy Saving & Environment friendly long life versatile pressure die-cast aluminium IP-66 roadwayluminars with high power LEDs as light source and electronic drive including connecting, complete all as specified and directed. |
| 27 | Supply & fixing in replacement security light mounting bracket, GI pipe 40mm dia medium grade for mounting bracket bent to shape 0.6 meter length and fixing arrangement with two Nos of MS clamps set, nut, bolts, washers and applying two coats of aluminium paints over a coat of Zinc oxide primer, complete all as specified and directed. |
| 28 | Supply and fixing in replacement of MS sheet 1.00 mm thick, louver shutter for exhaust fan suitable size for up to 350mm sweep with all accessories, fixing on wall, complete all as specified and directed. |
| 29 | Supply and fixing in replacement of MS sheet 1.00 mm thick, louver shutter for exhaust fan suitable size above 350 mm to 450 mm sweep with all accessories and fixing on wall, complete all as specified and directed. |
| 30 | Supply & fixing in replacement decorative LED gate light 40 Watt, made of high grade unbreakable polycarbonate material suitable for mounting on pipe dia 40/50 mm including conecting and fixing on post top with necessary fixing arrangement, complete all as specified and directed. |
| 31 | Supply and fix in repair flexible cord copper conductor of size 1.00 Sqmm, twin core, flat cable for connection to light fitting/fans from ceiling roses, complete all as specified and directed. |
| 32 | M&L in repair Sub main wiring with PVC insulated cable of size 2 X 4.0 Sqmm + 1 X 4.0 Sqmm earth wire multi stranded copper conductor FRLS drawing into and includingheavy duty 25mm dia surface PVC conduit and continuous earth wire complete and making good to disturbed surfaces to wall/ floor etc, complete all as specified and directed. |
| 33 | All as per item No. 32 above but sub main wiring of size 2 X 6 Sqmm + 1 X 6.0 Sqmm as earth wire. |
| 34 | Supply and Fixing in replacement Single pole and neutral encloser with two pin and earth plug and socket with one single pole MCBs of 32 Amp, complete all as specified and directed. |
| 35 | S & F in replacement Meter boxes made of Lid PC and base is polystyrene. Meter Boxes Size 217 x 253 x 115 mm in Grey RAL 7035 colour. Junction Box IP 65 Thermoplastic PS Polystyrene weatherproof Junction Box with multi level knockouts for cable glands in different sizes. The pre-moulded knockouts shall be available on top and bottom of the junction box to enable cable entries from both direction. The Meter box shall have an optional cable entry at the bottom the box via pre-moulded knockout to enable pole mounting option. Lid fasteners self closedwill be tool operated. it will be sealable with accessories. In the event of formation of condensed water, the Meter box shall have a minimum of two condensation knock-outs inside to ensure optimum safe performance complete all as per manufacturer’s instructions, complete all as specified and directed. |
| 36 | Supply andfixing in replacement vertical TPN Loadline DB, doble door, 4 way with 160 Amp bus bar 415 Volt sheet metal enclosure including incomer MCCB 160 Amp 16 KA, 4 Pole and 6 nos of MCB SP 16 Amp and 6 Nos MCB SP 20 Amp suitable dummy plate single pole, complete all as specified and directed. |
| 37 | S&F in replacement Sheet metal enclosure DB SPN, 12 Way with 200 Amp rated bus bar, 240 Volts, double door for fixing MCB\"s, isolators etc, having IP-43 protection, complete all as specified and directed. |
| 38 | S&F in replacement Sheet metal enclosure DB SPN, 8 Way with 200 Amp rated bus bar, 240 Volts, double door for fixing MCB\"s, isolators etc, having IP-43 protection, complete all as specified and directed. |
| 39 | S&F in replacement Sheet metal enclosure DB SPN, 4 Way with 200 Amp rated bus bar, 240 Volts, double door for fixing MCB\"s, isolators etc, having IP-43 protection, complete all as specified and directed. |
| 40 | S&F in replacement Sheet metal enclosure DB SPN, 2 Way with 200 Amp rated bus bar, 240 Volts, double door for fixing MCB\"s, isolators etc, having IP-43 protection, complete all as specified and directed. |
| 41 | Supply and fixing in replacement MCB TPN \"B\" series, 415 volts, 50Hz, 63 Amps, suitable for high inrush current loads, complete all as specified and directed. |
| 42 | Supply and fixingin replacement \"B\" series MCB SPN 40/32 amps, 240 volts, 50Hz, complete all as specified and directed. |
| 43 | Supply and fixing in replacement \"B\" series MCB SP 6 to 32 amps, 240 volts, 50Hz, complete all as specified and directed. |
| 44 | Supply and fixing in repair 1100 Volts grade heavy duty service line cable PVC insulated stranded aluminium conductor, twin core cable, served with inner sheathing of PVC tape and overall PVC sheathed in serviceconnections twin core cable flat or cicrular of aluminium condoctors size 10 Sqmm stranded conductor, complete all as specified and directed. |
| 45 | All as per item No. 44 but stranded aluminium condoctors size 6 Sqmm. |
| 46 | Supply and fixing in repair of PVC flexible copper coductor cable of size 2.5 sqmm, 3 core as connections to MCB/socket to geysers, complete all as specified and directed. |
| 47 | Supply and fixing in replacement door bell, Ding Dong AC, 230 volts, single pole, complete all as specified and directed. |
| 48 | Supply and fixing in repair LED Bollard light 13 watt, 900mm, 5700K, IP 54 made of gray color coated aluminum, complete all as specified and directed. Note:-The rate are deemed to be included for foundation and PCC (1:2:4) type B-1 using 20 mm graded stone aggregate and excavation, earth work etc required for proper fixing of bollard Lights. |
| 49 | Supply and fixing in replacement recess mounting LED slim ceiling round light 15W, complete all as specified and directed. |
| 50 | Taking down carefully any type of flame proof wiring including light, socket or power complete fitting such asflameproof switch, sockets etc with the existing, complete all as specified and directed. |
| 51 | Taking down carefully flame proof main switch/DB any type and size and keeping in safe custody or otherwise and making good the disturbed surfaces, complete all as specified and directed. |
| 52 | Taking down old unserviceable flame proofsubmain wiring of any size and description with Steel conduitand making good the disturbed surfaces of wall / roof or floor, complete all as specified and directed. |
| 53 | M&L flame proof,zone I & II, Gas Group II A/ II B, weather proof point wiring for one light/fan point controlled by one switch using approved colour coding as per IS with zero hologen flame retardent (HFFR) smoke free non toxic non corrosive PVC insulated unsheated flexible copper conductor cable 1.5 Sqmm (nominal area) single core 1100 volts grade in and including (ERW) stove enamelled condiuit heavy duty duly welded, flame proof weather proof junction box, tee, bends, inspection bends etc all as required includingPVC insulated unsheated flexible copper conductor cable 1.5 Sqmm (nominal area) single core 1100 volts grade as earth continuity conductor for One light/fan point controlled by one rotory switch/MCB, complete all as specified and directed.Note : For all type of point wiring and submain wiring Height of shelter is 7 to 8 meters . Contractor shall arrange ladder / crane / hydra on his own arrangement and cost of same shall deemed to be included in the quoted rate, no extra payment will be paid separately to the contractor on this account. |
| 54 | All as per item No. 53 above but with 2.5 sqmm for one 15 Amps flame proof socket outlet on independent board and 2.5 sqmm PVC insulated multisranded copper conductor cable as continuous earth wire complete. |
| 55 | Supply and fixing in replacement flame proof/weather proof direct entry typerotary switch singlepole ON & OFF rotary motion switch in cast aluminum alloy LM-6 enclosure epoxy powder coated single pole 230Volts 16 Amps, AC ON/OFF switch operated externally by Knob having 02 Nos of M-20 cable entries, earthing terminals suitable for mounting on Wall/Steel structure etc duly tested, complete all as specified and directed. |
| 56 | Supply and fixing in replacement flame proof/weather proof switch socket and plug combined in LM6, 16 A 240 Volts 3 pin and earth plug fully interlocked suitable for installation in hazardous as per IS-2147/62 alluminium alloy/cost iron neoprene gasket dgree of protection IP-65, complete all as specified and directed. |
| 57 | Supply and fixing in replacement flame proof/weather proof switch socket and plug combined in LM6, 32 A 415 Volts 5 pin and earth plug fully interlocked suitable for installation in hazardous as per IS-2147/62 alluminium alloy/cost iron neoprene gasket degree of protection IP-65, complete all as specified and directed. |
| 58 | Supply and fixing in replacement flame proof, weather proofLED sun flower light fitting 60 watt, grey powder coated die-cast aluminium lamp housing, built in control gear, faceted anodised aluminium reflector heat resistant toughened clear glass with LED tube light fixture driver,holder, connector etc with necessary clamps, nuts and bolts complete with all accessoriesconnecting elecrically using flexible flame proof end connectors, complete all as specified and directed.Note : For all type of light fitting Height of shelter is 7 to 8 meters. Contractor shall arrange ladder/crane/hydra on his own arrangement which cost shall deemed to be included in the quoted rate, no extra cost will be paid separately to the contractor. |
| 59 | Supply and fixing in replacement flame proof, weather proofLED sun flower light fitting 50 watt, grey powder coated die-cast aluminium lamp housing, built in control gear, faceted anodised aluminium reflector heat resistant toughened clear glass with LED tube light fixture driver,holder, connector etc with necessary clamps, nuts and bolts complete with all accessoriesconnecting elecrically using flexible flame proof end connectors, complete all as specified and directed.Note : For all type of light fitting Height of shelter is 7 to 8 meters. Contractor shall arrange ladder/crane/hydra on his own arrangement which cost shall deemed to be included in the quoted rate, no extra cost will be paid separately to the contractor. |
| 60 | Supply & fix in replacement flame proofflood light luminaries well glass suitable for LED lighthaving 100 Watt compress of body mode in die cast aluminium housing luminaire, heat resistant toughend glass cemented to cast aluminium, retainging ring fixed to main body, mounted on MS galvanised iron cradle and base plate for rotating in horizontal and vertical planes, luminarire is provided with LED andcontrol driver, connector etc complete with all accessoriesand earthing terminals fixing at convenient location, complete all as specified and directed. |
| 61 | Supply & fix in replacement flame proofflood light luminaries well glass suitable for LED lighthaving 120 Watt compress of body mode in die cast aluminium housing luminaire, heat resistant toughend glass cemented to cast aluminium, retainging ring fixed to main body, mounted on MS galvanised iron cradle and base plate for rotating in horizontal and vertical planes, luminarire is provided with LED andcontrol driver, connector etc complete with all accessoriesand earthing terminals fixing at convenient location, complete all as specified and directed. |
| 62 | Supply & fix in repalcement flame proof light luminaries well glass suitable for LED tube lighthaving 1 x 20 Watt compress of body mode in die cast aluminium housing luminaire, heat resistant toughend glass cemented to cast aluminium retainging ring fixed to main body , mounted on MS galvanised iron cradle and base plate for rotating in horizontal and vertical planes, luminarire is provided with LED lamps, andcontrol driver, connector etc complete with all accessories main connector suitable up to 6 Sqmm incoming cable and earthing terminals fixing at convenient location, complete all as specified and directed. |
| 63 | M&L for flame proof circuit sub main wiring in and including ERW conduit with two single corecable (FRLS) PVC insulated unsheathed 1100 volt grade copper conductor multi standred of size 4 Sqmm including of one run earth wire of 4 Sqmm to be drawn in and including ERW stove enamelled black rigid conduit including all flame proof conduit accessories such as tee, bend elbow & conduit junction box, complete all as specified and directed.Note : ERW conduit, conduit accessories, circuit wires and earth wires complete shall be treated as one unit for the purpose of payment. |
| 64 | M&L for flame proof circuitsub main wiring in and including ERW conduit with four single corecable (FRLS) PVC insulated unsheathed 1100 volt grade copper conductor multi standred of size 4 Sqmm including of one run earth wire of 4 Sqmm to be drawn in and including ERW stove enamelled black rigid conduit including all flame proof conduit accessories such as tee, bend elbow & conduit junction box, complete all as specified and directed. Note : ERW conduit, conduit accessories, circuit wires and earth wires complete shall be treated as one unit for the purpose of payment. |
| 65 | Supply and fixing in replacement flame proof weather proof DB TPN 415 Volts 4 way with bus bar in cast aluminium LM-6 enclosure operated externally spring type knob having hinges and MCB fixed on the enclosure directly to the control knobs complete with cable entries for incoming and out going cables from bottom with cable glandssuitable for hazardous area and confirming to IS-2147/62 neoprene gasket degree of protection IP-65 including providing MCB etc, complete all as specified and directed. Incoming (a) MCB63 Amps, TPN , 10 KA,\"C\" series-01.Out going : (a) MCB SP 6 to 32Ams,10 KA,\"C\" series - 07 Nos, (b) MCB SPN 10 Amps,10 KA,\"C\" series - 02 Nos, (c) MCB TPN 40 Amps,10 KA,\"C\" series - 01 Nos |
| 66 | S&F in replacement MCB TPN 63 -100 Amps, 10 KA rating, \"C\" series 10 KA 415 volt 50Hz, complete all as specified and directed. |
| 67 | S&F in replacement MCB SPN 63 A current rating, 240V,50 Hz, ACshort circuit protection and rupturing capacity (breaking) 10 KA and suitable for lighting and other domestic loads, complete all as specified and directed. |
| 68 | S&F flame in replacement proof, weather proof DB, SPN, 230 volts, 8 way with busbar in cast aluminium LM-6 enclosure operated externally spring type knob having hinges and MCB fixed on the enclosure directly to the control knobs complete with suitable incoming and outgoing cable entries with cable glands suitable for hazardous area and confirming to IS-2147/62, neoprene gasket, degree of protection IP 65, suitable for and including MCB SPN 40 Amp- 01 No (Incoming) and MCB SP 6-10 Amp -06 Nos (Outgoing), complete all as specified and directed. |
