|
| 1 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, complete all as specified and directed. |
| 2 | Removing excavated material exc. 250 m but n exc. 500m and depositing where directed complete all as specified and as directed. |
| 3 | M & L for Plain cement concrete Type B-2, 1:2:4 (40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 4 | S & F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, confirming to Fe 410 - W (Gde - E 250 - quality B) including distance pieces, cleats, etc., complete all as specified and as directed. |
| 5 | S & F Plates (plain) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of FE 410-W (Gde-E-250) complete all as specified and as directed. |
| 6 | M & L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 7 | S & F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I, including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 8 | S & F for 20mm bore GI tubing medium grade with all fitting and fixed to wall ceiling or laid in floor etc complete all as specified and as directed. |
| 9 | All as per item No 8.00 here-in-before but for 15 mm bore pipe complete all as specified and as directed. |
| 10 | S & F for 15mm bore stop valves cast copper alloy fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed. |
| 11 | S & F for 20mm bore stop valves cast copper alloy fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed. |
| 12 | S & F for 15mm bore, bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 13 | S & F Cap Sand as per specification given below: - The inner frame shall be 50mm X 20mmteak wood bittern six in Nos. The back and front of frame shall be covered with 6mm thick commercial ply. The edge of frame shall be covered with 6mmX35mm thick teak wood edging fixed around the frame with headless nails and adhesive six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg 5mm thick looking mirror of (Saint Gobian, Modiguard/Atul) shall be provided as shown on drg with beading all-around Mild steel key plate shall be provided at both top corners of the hat stand. Finish: All teak surfaces shall be given high gloss French polish with lacquer finish. All steel surfaces shall be painted with two coats of enamel paint over a coat of primer. Rest all as per drawing No FD-233. |
| 14 | S & F for Air circulator fans high speed 230 Volt single phase oscillating 450mm sweep suitable for wall mounting having double ball bearing for noiseless operation, pull cord for speed & smooth oscillation, aerodynamically designed and balanced propeller type blades, 1750 RPM and air delivery 100 Cum per hour complete all as per Havells Model Airboll Hi-Speed and cap part No FHWABHSWHT18 or equivalent in other makes. |
| 15 | S & F exhaust fan steel body AC single phase 230 volt of size 300mm sweep with blades and frame and louvers complete all as specified and as directed.Note: - The rate quoted by contractor shall include the rate for provision of hole by cutting the wall any type including making good the disturbed surface etc. |
