|
| 1 | Supplying and staking including loading unloading & transportation, of good soil well sieved 90% to pass through IS Sieves of 10 mm size free from stones rubbish like lumps stones roots and other foreign material suitable for gardening, the soil should be fresh from quarry. The colour of the soil generally red including cost of all royalty and carriage all tools, plants, taxes, octroi etc. all complete as specified, directed and approved by Engineer-in-Charge.Note: Stack measurement of earth shall be reduced by 20% for payment towards voids. |
| 2 | Supply only Urea / Ammonium Sulphate |
| 3 | Supply only Bone Meal. |
| 4 | Supply only Potassium Sulphate or Muriatic of Potash |
| 5 | Supply only insecticide/herbicide of approved make Chlorpyrifos 35% EC or Monocrotophos 30% EC. |
| 6 | Supply only at site dump manure including loading unloading & transportation, well decayed, well dried, well powdered, without closes and free from stones, dried grass and other rubbish materials complete all as specified directed by Engineer-in-Charge. Notes:- i) The colour of the manure shall be black. The manure screened through sieve at 1:5 designation 4.75 micron including carriage at site. The manure will be measured by measuring box. ii) Solid sludge/manure measurement shall be reduced by 8% for payment. |
| 7 | Mixing earth and sludge or manure in proportion of 2:1 including watering spreading and levelling of required thickness complete all as specified and as directed. |
| 8 | Supply & Laying Bermuda/Korean carpet lawn with prepare of ground and up roofing of unwanted vegetation/weeds etc, excluding cost of earth & manure complete all as specified and as directed. |
| 9 | Excavation in laterite rock for various trees complete all as specified and as directed. |
| 10 | Supply and planting of tree Foxtail Palm. |
| 11 | Supply and planting of tree Areca/ Bottle Palm. |
| 12 | Supply and planting of trees Duranta Plant/Acalypha/Ficus. |
| 13 | Supply and planting of trees Bougainvillea Plant. |
| 14 | Supply and planting of trees Neem. |
| 15 | Supply and planting of trees Gulmohar |
| 16 | Supply and fixing tree guards 45 cm dia and 1.50 metres high fabricated with 3 No, Flat Iron of size 35x3mm at bottom and 25x3 in the middle & top, welded with Mild Steel welded mesh of weight not less than 4 kg/sqm and three legs of 12 mm dia Mild Steel bars 400 mm long with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed |
| 17 | Excavating in trenches, not exceeding 1.5 metres wide and not exceeding 1.5 metres in depth; for foundation, laying of cables, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 metres in depth and getting out hard/dense soil complete all as specified and directed by Engineer-in-charge. |
| 18 | Returning and filling in and including spreading levelling watering and well ramming in layer not exceeding 25mm thick in soil complete all as specified and as directed. |
| 19 | Material and Labour for providing PCC 1:4:8 type D2 using (40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer in Charge. |
| 20 | Material and Labour for Machine cut laterite stone masonry exceeding 10 cm in width square rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed. |
| 21 | Material and Labour for providing PCC 1:2:4 type B1 using 20 mm graded stone aggregate, as in lintels up to 1.5 metres clear span, cills, steps; seismic and other similar bands plinth courses, string courses,lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engineer in Charge. |
| 22 | Material and Labour for rendering 15 mm thick with cement mortar 1:4 for laying in dado/wall cladding etc complete all as specified and as directed. |
| 23 | Material & Labour for 18 to 20mm thick Granite tiles (of any type)machine cut as in wall cladding laid over cement screed and jointed with grey cement slurry including mixing of Araldite adhesive or equivalent for proper bonding of stone slabs on walls, pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, colour and shades of granite as approved by Engineer in charge complete all as specified and as directed |
| 24 | Material and Labour for rounding to edges of granite and marble stone slabs one edge such as in copings, steps, cooking platform, and other similar situations complete all as specified and directed. |
| 25 | Removing excavated soil and depositing to a distance not exceeding 50 metres where directed at a level not exceeding 1.5 metres above the starting point complete all as specified and directed |
| 26 | Surface dressing not exceeding averaging 15 cm deep getting out in soft/ loose soil complete all as specified and directed. |
| 27 | Material and Labour for Murum/red bajri filling in floors or paving, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed by Engineer-In-Charge. |
| 28 | Supply and laying factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed |
| 29 | Supply and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed |
| 30 | Material and Labour for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in kerbs or benching etc including necessary form work complete all as specified. |
| 31 | Supply and fix monoblock pump set suitable for 415 Volt, 3-phase of capacity 10 HP including foundation and canopy roof cover enclosure of pump set complete all as specified and directed. |
| 32 | Supply and fix DOL starter suitable for 415 Volt, 3-phase of capacity 10 HP in a closed enclosure made of CRCA sheet 3 mm including wiring complete all as specified and directed. |
| 33 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded copper conductor of size 4 sqmm 3 core complete all as specified and directed. |
| 34 | Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 4 core complete all as specified and directed. |
| 35 | Supply and fix of MCCB incoming TPN DB vertical type, suitable for 40 Amps MCCB as incomer, made of sheet steel, powder painted with neutral busbar suitable rating, neutral link, IP-43-IK09 protection grade, 415 Volts VTPN with 4-way double door complete all as specified and directed by Engineer-in-charge. |
| 36 | Supply and fixing 415 Volt 10KA \"C\" curve miniature circuit breaker (MCB) 32 Amp current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. |
| 37 | Supply and fixing MCCB 4 Pole, 415 Volt, Thermal Adjustable type, 40 Amps with breaking capacity 25 KA complete all as specified and directed |
| 38 | Supply and laying DWC (Double wall corrugated) duct pipe outer Dia 63 mm and inner Dia 50 mm confirming IS 16205 (Part 24) for protection of electric cable complete all as specified and directed. |
| 39 | Supply and fix of Rigid non-metallic PVC conduit of size 40 mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, complete all as specified and directed. |
| 40 | Material and Labour for GI tubing 50mm Dia medium grade (ISI marked) with all fitting/accessories for protection of cable on pole/wall and under road crossing including clamps, nuts bolts etc complete all as specified and directed. |
| 41 | Ditto all as per Serial Item No 40, but for GI tubing of size 15mm. |
| 42 | Supply and fix High density polyethylene (HDPE) pipes of size 40 mm and pressure rating 6 kg/sqcm laying in trenches including suitable fittings (sprinkler heads and nozzles, connectors, riser heads etc) and sufficient nozzles and facilitate sprinkler nozzle system for watering complete all as specified and directed |
| 43 | Ditto all as per Serial Item No 42, but for HDPE pipe of size 15mm. |
| 44 | Supply and fix of Stop valves 40mm size, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 45 | Ditto all as per Serial Item No 44, but for Stop valve of size 15mm. |
| 46 | Supply and fix of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 50 mm complete all as specified and directed by Engineer-in-charge. |
| 47 | Supply and Fix of Cast Iron non return valve of size 50 mm complete all as specified and directed. |
| 48 | Supply and Fix Cast Iron foot valve of size 50 mm threaded/flanged as required complete all as specified and directed. |
| 49 | Supply and installation of fast earth electrode 3.0 metre length size model F84, having two Mild Steel pipe one inside the other with proper not deep galvanized outer Dia 88 mm and inner Dia 48 mm and the cavity between the rod pipes is filled with ground resistance improment powder, sealed with both end the outer pipe of electrode should be zinc coated, the electrode should buried directly in the ground by making boring of diameter 10 with boring machine highly conductive non-magnetic and non-corrosive is to be connected with GI strip 25 X 4 mm of requiredlength to facilitate further connection to earth dolly and provision of earthing chamber in bricks wall size 45 x 45 x 15 cm an having PCC cover of required size all as per IS 3034 complete all as specified and as directed. |
| 50 | Supply and Fix Earth continuity conductor or main earthing lead 25x4mm galvanised iron strip fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc, complete all as specified and as directed. |
