|
| 1 | Earthworkin excavationof foundationtrenches or drains,in all sorts of soil (includingmixed soil but excluding laterite or sandstone) including removing,spreadingor stackingthe spoils within a lead of 75m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. - Depth of excavation not exceeding 1500 mm |
| 2 | Earth work in filling in foundation trenches or plinth with goodearth, in layers not exceeding 150mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) - With earth obtained form excavation of foundation |
| 3 | Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating thesamebythorough saturation with water,rammingcompleteincludingthe cost of supply of sand. (payment to be made on measurement of finished quantity). |
| 4 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. - In ground floor roof |
| 5 | DismantlingR.C.floor,roof,beamsetc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. - In ground floor including roof |
| 6 | Brick work with 1st class bricks in cement mortar (1:6) |
| 7 | In foundation and plinth |
| 8 | In superstructure ground floor |
| 9 | For 1st floor |
| 10 | For 2nd floor |
| 11 | 125 mm thick brick work with 1st class bricks in cement mortar (1:4) -In ground floor |
| 12 | Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 320 Kg of cement with super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture]M 25 Grade |
| 13 | Pakur Variety |
| 14 | For 1st floor |
| 15 | For 2nd floor |
| 16 | Cement concretewith graded stone ballast (40 mm size excluding shuttering) - In ground floor - Pakur Variety - 1:3:6 proportion |
| 17 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) - (When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed for every 4 m or part thereof) - 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In- Charge. |
| 18 | In ground floor |
| 19 | For 1st floor. |
| 20 | For 2nd floor |
| 21 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. - Tor steel / mild steel (SAIL/TATA/RINL) |
| 22 | In foundation, basement and upto roof of ground floor/upto 4 m |
| 23 | In 1st floor |
| 24 | For 2nd floor |
| 25 | Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer\"s specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface). - Note: Applicable only when the full diameter of reinforcement steel is exposed. |
| 26 | Extrarateforusingwaterproofingand plasticising admixture@ 0.2% by weight of cement (or at manufacturer\"s specified rate) for concrete of various grades. |
| 27 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 28 | 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4)in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer-in-charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m] |
| 29 | In ground floor |
| 30 | For 1st floor |
| 31 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. |
| 32 | FLOOR - With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. |
| 33 | Area of each tile above 0.09 Sq.m - Ground floor - Coloured decorative |
| 34 | Area of each tile above 0.09 Sq.m - 1st floor - Coloured decorative |
| 35 | WALL - With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. |
| 36 | Area of each tile above 0.09 Sq.m - Ground floor - Coloured decorative |
| 37 | Area of each tile above 0.09 Sq.m - 1st floor - Coloured decorative |
| 38 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @2.91 Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer\"s specification and direction of Engineer-in- Charge.(White cement, synthetic adhesive and grout material to be supplied by the contractor. - With application slurry @1.75 kg/Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. - For 1st floor - Light colour |
| 39 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs. - (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) - Grill weighing above 10 kg/sq.m and upto 16 kg/sq.m |
| 40 | (i) In ground floor |
| 41 | (ii) For 1st floor |
| 42 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc.withpointweldingatnotmorethan 150mm apart complete in all respect as per design including cost of all labour and materials . |
| 43 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints incl. throating, nosing & drip course, scaffolding/staging where necessary (ground floor) [excluding cost of chipping over concrete surface] |
| 44 | A. In ground floor - (i) With 6:1 cement mortar |
| 45 | 20 mm. thick plaster |
| 46 | 15 mm. thick plaster |
| 47 | (ii) With 4:1 cement mortar - 10 mm. thick plaster |
| 48 | B. In 1st floor - (i) With 6:1 cement mortar |
| 49 | 20 mm. thick plaster (External / Internal) |
| 50 | 15 mm. thick plaster (External / Internal) |
| 51 | (ii) With 4:1 cement mortar - 10 mm. thick plaster (External / Internal) |
| 52 | C. In 2nd floor - (i) With 6:1 cement mortar |
| 53 | 20 mm. thick plaster (External / Internal) |
| 54 | 15 mm. thick plaster (External / Internal) |
| 55 | (ii) With 4:1 cement mortar - 10 mm. thick plaster (External / Internal) |
| 56 | Neat cement punning about 1.5 mm thick in wall, dado, window sills, floor, drain etc. - (Note: Cement 0.152 Cu.m. per 100 sq.m.) |
| 57 | ApplyingInteriorgradeAcrylicPrimerof approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. - One coat - Water based interior grade Acrylic Primer |
| 58 | ApplyingExteriorgradeAcrylicprimerof approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finishacrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. - One Coat |
| 59 | In ground floor |
| 60 | For 1st floor |
| 61 | For 2nd floor |
| 62 | ProtectiveandDecorativeAcrylicexterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. - Premium 100% Acrylic emulsion (Weathershield/ Weathercoat/ Snowcryl XT/Apex) |
| 63 | In ground floor (Two coats) |
| 64 | In 1st floor & above (Two coats) |
| 65 | In 2nd floor & above (Two coats) |
| 66 | Priming one coaton steel or other metal surfacewithsyntheticoilboundprimer of approved quality including smoothening surfaces by sand papering etc. - (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) |
| 67 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : - On steel or other metal surface - With super gloss (hi-gloss) - 2 coats (with any shade except white) |
| 68 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : - (Two coats) - Standard Quality |
| 69 | Rendering the surface of walls and ceiling with whitecement basedwall puttyof approved make and brand(1.5mm thick) |
| 70 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top, bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film - Natural white ------- For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr. ------- For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr. ------ [Note : for estimate purpose construction wing may consider weight of 2-track Aluminium window @ 5.5 Kg per Sq.M.and 3-track Aluminium window @ 6.5 Kg per Sq.M] |
| 71 | Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge. (Excluding cost of glass/ panel board, door spring/ Al hinges, door closer, door stoper, handle, tower bolt and locking arrangment etc) - 10-12 Micron thickness Annodizing film - Natural white. ----- (unit wt of to Top & side frame @1.366 kg/m ; top rail @ 1.296 kg/m; bottom rail @ 1.974 kg/m; lock rail @ 1.590 kg/m; door vertical @ 1.412 kg/m; glazing clip @ 0.167 kg/m.) - [Note : for estimate purpose construction wing may consider weight of Aluminium door@ 9.0 Kg per Sq.M] |
| 72 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987; -coloured, toughened glass conforming to IS: 2553-1992 (part-II) - 6mm thick |
| 73 | Supplying 125 mm. Dia acrylic handle for aluminium door as per approved make & brand. - Natural Colour |
| 74 | Door stopper (Anodised aluminium) |
| 75 | Godrej Hydraulic door closer fitted and fixed complete. - Medium type |
| 76 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: -100 x 63 x 3.2mm. |
| 77 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: - 150mm long x 10mm dia. bolt. |
| 78 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.- 300mm x 16mm dia. bolt. |
| 79 | Supplying,fitting&fixingUPVCpipesA-TypeandfittingsconformingtoIS:13592-1992 with all necessary clamps nails, includingmaking holesinwalls,flooretc. cutting trenches in any soil through masonry concrete structures etc if necessary and mendinggooddamagesincludingjoining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. - UPVC pipes - 110 mm dia. |
| 80 | Supplying, fitting & fixing bib cock or stop cock. -PTMT (Polytetra Bib Cock / Stop Cock (Prayag or equivalent) - 15 mm |
| 81 | Supplying, fitting and fixing PVC pipes of approved make of schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee,short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) - For Exposed Work, PVC Pipes - (Dia) |
| 82 | 15 mm dia |
| 83 | 20 mm dia |
| 84 | 25 mm dia |
| 85 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 86 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. - 630 mm x 450 mm size |
| 87 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. - Sink only - 630 mm X 550 mm X 180 mm |
| 88 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 - Double socketed 3 Mtr length - 110 mm dia |
| 89 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. - With \"P\" trap |
| 90 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. - 470 mm x 280 mm x 340 mm |
| 91 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). - 450 mm x 350 mm |
| 92 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. - EWC - Plastic (hallow type) white |
| 93 | Supplying, fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. - Polythene flush pipe |
| 94 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. - 600 mm x 450 mm |
| 95 | Supplying fitting and fixing towel rail with two brackets - Aluminium - 25 mm dia 750 mm long |
| 96 | Constructing Inspection pit of inside measurement600mmX600mmXupto 600mm (depth) with 250 mm thick 1st. class brickworkincementmortar(1:4)onall sides, bottom of the pit consisting of 100 mm thickcementconcrete(1:3:6)withstone chips overalayerofjhamabrickflat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100mmthickR.C.C.slab(1:1.5:3)with stonechipsandnecessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces ofthe slaband one560 mmdia.- R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work completeinallrespectwithallcostsof labour and materials. - With Pakur variety (Other manufacturers not specified) |
| 97 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted and fixed in the100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C (1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sidesofthetankswithearth,removing spoils,fillingupthechamberwithclear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting allnecessary pipes,jointsetc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofingcompound @0.5%byweightof cement with all costs of labour and materials.- For 20 users (A) with Pakur variety (Other manufacturers not specified) |
| 98 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150mmintermediatecementbrickwork (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) toinside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. coverslab includingfillingbottom1.00 metre of inside of the well with brick metal (50mmto63mmsize)including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. - R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction completeinallrespectwithallcostsof labour and materials. - With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia - (Other manufacturers not specified) |
| 99 | Construction of masonary surface drain of 30 cm width and 25 cm deep with 12.5 cm thick brick work in (4:1) cement mortar over 7.5 cm cement concrete (1:3:6) with jhama khoa on single brick flat soling & 15 mm thick cement cement plaster (4:1) on brick work incl. excavation of earth, providing a bed of 35 mm thick IPS & neat cement punning over cement plaster. |
| 100 | Roof treatment by application of non toxic polyurethane modified acrylic based single component (P U Roof Coat) solvent free, cold applied polyurethane modified elastomeric waterproofing membrane with excellant UVresistant capasity as per ASTM D6083 [a water based 100% acrylic elastomeric emulsion polymer latex coating used as protective coating for roofs] after preparing the surface by cleaning and ti repairing the roof cracksby cement & sand mortar (1:4), preferably with antishrinkage mortar (to be paid separately) if any, apply two coats along with a Priming coat (two coats of P U Roof Coat and one coat of primer coat compatible with main product as per manufacturers specification) and reinforced with or without 20 gsm Geotextile Fleece, including the cost of primer coat and base preparation, tools & plants but excluding the cost of scaffolding and stagging complete as per direction of Engineer-in-charge. (Note: If Geotextile Fleece not uesd, the rate would be reduced by Rs. 5/-per Sqm) - With Geotextile Fleece |
| 101 | Supplying of PVC Water storage Tank (3 layers - colour Blue / Green / White / other than Black) 100% virgin raw material with thermal insulation and UV protection of closed top with lid including transport. (Make - Supreme / Sintex / Patton / Polyfoam) - 2000 Ltr. tank (6.60 per ltr x 2000) |
| 102 | Supplying, fitting & fixing of steel door of shutter thickness 46 mm, 0.8 mm for shutter and 1.2 mm for frame, honey core infill, p u powder coated with Hasp Bolt, 2 nos. D-Handale in both side, 6 nos. ball bearing hinges, 2 nos. Tower bolt & 2 nos. door stopper including fixing at site, as per manufacturers specification.- Tata Pravesh Steel Door - Double Leaf - External door with plain wood finiosh |
