|
| 1 | Taking down chowkats without taking off shutters from the frame exc.1.50 Sqm and not exc. 4.00 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats without taking off shutters from the frame n.exc.1.50 Sqm complete all as specified and directed. |
| 3 | Taking down cement or cement lime plaster on brick or stone wall etc., including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 4 | M & L machine cut cudappa stone slab 20-25 mm thick as in window cill over cement screed base CM 1:410 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laying floor finishes srubbing and polishing complete all as specified and directed. |
| 5 | Rendering 10 mm thick (1:6) CM on fair faces of brick work or concrete surfaces complete all as specified and directed |
| 6 | M&L for 15 mm thick rendering in Cement Mortar 1:4 in two layers (First layer 10mm thick nd Second layer 5mm thick) with water proofing compound including finishing the surface even and smooth without using extra cement. (WPC shall be measured and paid separately) complete all as specified and directed. |
| 7 | Supply Only integral water proofing compound complete all as specified and directed |
| 8 | M&L for rendering 5 mm thick in CM 1:3 as in ceiling finishing even and fair etc complete all as specified and directed by EIC. |
| 9 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed. |
| 10 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed. |
| 11 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately) complete all as specified and directed. |
| 12 | S&F Providing factory made 24mm thick 100% solid WPC ( Wood Polymer Composite)- JALI Door Shutter of required size comparising of virgin PVC resin of K Value 57-60 (Suspension Grade ), calcium carbonate and natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives, made from Extrusion process WPC foam sheet single Extruded ( inner) with having minimum density not less than 650 kg/cbm, having good screw holding capacity ( screw withdrawal strenght of 2000 N (Face) & 1100 N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of frame of class A category with property of being termite / borer proof , water / moisture proof & fore retardent. WPC JALI Door to be fixed with stainless steel wire cloth .36 mm nominal dia of wire and average width of aperature 1.10mm and fixed with stainless steel wire staples stainless steel butt hinges ( will be paid seperately) of required size with necessary full body threaded star headed counter sunk SS screws.all as per direction of engineer-in-charge. material test certificate and authentication should be compulsory provided by the manufacturing company complete : For Kitchen shutterd / Balcony & main door shutter,completed all as specified and directed. |
| 13 | M&L for MS hold fasts size 25x6mm FI fixed to chowkats complete all as specified and directed. |
| 14 | Providing PCC 1:2:4 type B1 cement concrete in bed blocks for hold fasts complete all as specified and directed. |
| 15 | S&Falluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminium alloy and fixed of length of bolt 300 mm complete all as specified and directed. |
| 16 | Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M eachcomplete all as specified and directed. |
| 17 | M&L for factory made 18mm (+0.70mm) thick celuka PVC ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company, One side prelam and other side plain 18mm thick Celuka PVC Ply for cupboard shutter and also manufacturer\"s test report and test certificate is mandatory with each and every supply of the material, complete all as specified and directed. |
| 18 | M&L for factory made 18mm (+0.70mm) thick celuka PVC ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company, Both sides plain 18mm thick Celuka PVC Ply for cupboard shelf/partition/drawer and also manufacturer\"s test report and test certificate is mandatory with each and every supply of the material, complete all as specified and directed. |
| 19 | S&F 40mm continous (piano) hinges, mild steel, bright finish or electro-galvanised complete all as specified and directed. |
| 20 | S & F 125mm hasp & Staple, safty type, aluminium anodised with mild steel hinge pin including bolts to hinge plate and fixing with screw complete all as specified and directed. |
| 21 | S&F 100 mm size Stainless Steelhandle complete all as specified and as directed by Engr -in - Charge. |
| 22 | M &L for50 mm magnetic catchesand fixed complete all as specified and directed by Engr-in- Charge. |
| 23 | S&F aluminium section in sliding windows/ventilators ,any type (sliding on minimumtwo PVC roller of best qulaity foreach shutter), powder coated in approved colour (Thickness of powder coating not less than 50 micron), aluminium section (medium weight of series \"B\")as section directed by Engineer-in-Charge, cut to size, jointed together with cadmium plated steel screws including rubber beading or gasket for aluminium sections for fixing glass/XPM jali and all necessary fittings complete, screws, plugs for fixing screws, etc complete all as specified and directed. (Make : JINDAL/HINDALCO)Notes: (i) Weight of aluminium sections shall only be measured. (ii) Rate quoted by the contractor shall deemed to be inclusiveof allnecessary fittings and fixture such as roller, handle locks etc. Quoted rate shall be deemed including cost ofrubber beading or gasket etc andwill be not measured separately. (iii)Glass paneand wire meshwill be measured and paidseparately under relevant items as supply only. |
| 24 | Supply only 5.5mm thick Sheet glass, ordinary qualityin squares n exc 0.5 sq. m in each panecomplete all as specified and directed. |
| 25 | Supply only 5.5mm thick Sheet glass, ordinary qualityin squares exc 0.5 sq. m in each panecomplete all as specified and directed. |
| 26 | Supply only figured glass,tinted colour, pin head type,4mm thick, in square n.exc.0.5sqm in eachpane for fixing aluminium frame complete all as specified and as directed. |
| 27 | Supply only stainless steel wire cloth 0.36mm nominal dia of wire and arrange width of aperture 1.40mm for fixing in aluminium windows along withcomplete all as specified and directed by the Engr-in-Charge |
| 28 | S&F aluminium powder coated Grills of approved design for window / ventilators and fixing with F/U channel and stainless steel screws complete all as specified and directed. |
| 29 | S&F and mild steel framed work as in grills, greating and guard bar with end of bars shouldered and / or reveted or forged into spikes nad similar works confirming to Fe-410 and Fe-310 complete all as specified and directed. |
| 30 | M & L for preparation of new surfaces on wall and applying two coats of 100 % acrylic emulsion paint over a coat of acrylic primer incl. complete removal of existing treatment and necessary scaffoldingcomplete all as specified and directed. |
| 31 | M&L for preparation new plastered surfaces of walls and applying two coats of distemper over a coat of primercomplete all as specified and directed. |
| 32 | M&L for preparation new plastered surfaces of ceilingand applying two coats of distemper over a coat of primer compelte all as specified and directed by EIC |
| 33 | M & L for preparation of old decorated surfaces of ceilingby brooming down or steel wire brushing scrapping down smoke, soot ,moulds, moss and efflorecent salts and treating oil and gresy spots and thereafter applying one coat of oil bound distemper with roller complete all as specified and directed |
| 34 | M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying with roller one coat of oil bound distemper complete all as specified and directed. |
| 35 | M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and thereafter applying with roller Two coat of oil bound distemperincluding application ofwall care putty for smooth finish.etc complete all as specified and directed. |
| 36 | M&L for preparation of old acrylic surfaces of walls/ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots, washing down with water, filling of cracks with Dr fixit crack filler or equivalent make and applying one coat of 100% antifungal acrylic paint of approved shade over a coat of acrylic primer including necessary scaffolding work etc complete all as specified and directed. |
| 37 | M&L applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any desccription exc. 10Cm width or girth incl. Preparation of surfaces complete all as specified and directed. |
| 38 | S & F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plaincolour PVC sheet reinforced with M.S. Square tube, complete all as specified and shown in drg for SI No. 8095 on ser page No. 160 in SSR-2010 (Pt-II), complete all as specified and directed. |
| 39 | S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing for SI No.8080 on ser page No.156 in SSR-2010 (Pt-II) complete all as specified and directed. |
| 40 | S&F stainless steel butt hinges, medium weight, 100mm long, complete all as specified and directed. |
| 41 | S&F aluminium anodised barrel tower bolts of extruded section, 100 mm long, complete all as specified and directed. |
| 42 | S&F aluminium anodised bow handles of 100mm size, fabricated type of extruded section fixed with screws to shutters, complete all as specified and directed. |
| 43 | Deduct Credit for Demolished/ Dismantled material Rs. (-) 70,000.00 (Minus) as listed in Schedule of CreditNote 1:- Tenderers will not quote against this item being a tentative amount to be considered to arrive at the \"Contract Sum\"Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple storey bldgs having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items. |
