Name of Work: - Provision of LED street lights on existing poles at various dark spots in Ward No-67, underKeshav Puram Zone
Sl. No.
Item Description
1
ABC
2
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as requiredUpto 35 Sq mm
3
Supply of XLPE insulated PVC sheathed AL. conductor armoured Cable 1.1 KV grade conforming to IS-7098 of following size- (a) 2X6 Sq mm
4
LEDStreetlightfixture,powdercoatedpressurediecast aluminumbody(Systemlumen efficacy>135 lm/Watt) Supplying,installation,Testing&CommissioningofStreetlightLED fixturepowdercoatedpressurediecastaluminumbodywith driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5KVL,N,EasperIEC61000-4-5,Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 ,P. F.≥0.95, IP-66,IK-10,CRI>80,undervoltageandovervoltageprotection,EMI- EMCAsper CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mmdiapipe,lifetime(LED,Driver&electricalcircuitry)ofminimum 50000BurningHourswith70%ofinitialLumenmaintainedtilllife ends as per LM80 extrapolation IES TM-21-11 report,CCT 3000°K / 4000°K / 5700°K/6000°K/6500°K(AsperANSIBin), SDCM (Standard Deviation Color Matching) <5, Maximumpowerconsumption should not more than the specified rating and Fixture shall be of relevant BIS standard completein all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copperconductorsinglecorecableandearthingetc.asrequiredwith Minimum 5 year OEM warranty.System lumen efficacy >135lm/Watt output . LM79 & LM80 Test reportfromNABLlab foralltestingrequired forLED fixtures as per BISshall be submitted. Shape size and CCT shall be asapprovedbyEngineer-in-Chargeasperrequirement.(Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). 45 watt
5
Supply and fixing of 32mm dia X 1 meter long G.I. Pipe (Medium Class) bracket for mounting of fluorescent /HPMV /HPSV Street Light fitting on pole including bending the pipe to the required shape , 2 nos 25mm X 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd.
6
Supply of PVC insulated and FRPVC sheathed multicore copper conductor 1.1 KV grade confirming to IS694 as reqd. 3x1.5 sqmm.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
