|
| 1 | ROAD WORKProviding, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. compacted of work. as direted by Engineering in incharge. wirtth stone ballast granullar 45mm to 22.4 mm @30% ,22.4 to 2.36 mm @40% 2.36 mm to 75 micron @30% all complete. |
| 2 | Providing and applying Primer Coat with bitumen emulsion SS1 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. All complete. |
| 3 | Providing and laying Dense Graded Bituminous Macadam with higher capicity batch type HMP using crushed aggregates of specified grading, premixed with 60/70 (VG-30) bituminous binder @ 4.50 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 505 complete in all respects. with density of mix 2.31 tone/cum with stone gritt 25mm to 10mm @30%,10-5 mm @28% 5mm &below @40% lime powder filler 2% by wt of aggregate all complete. |
| 4 | Providing and applying Tack Coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg/sqm on prepared bituminous surface cleaned with mechenical broom. MORTH AR S.S.I. Grade |
| 5 | Providing and laying Bituminous Concrete grading-II with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with 60/70 (VG-30) bituminous binder @ 5 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory smooth steel wheeled tendom roller for static & vibratory passages & with also penumatic tyre roller property to get required density 2.36 tone/cum with stone gritt 13.2 to 10 mm @21%, 10-5 mm @ 17% 5mm & below @60%, lime powder filler @2% by wt of aggregate all compleete and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 507 complete in all respects. |
| 6 | tractor with trolly include driver & POL extra SOR 2025 P.NO 17 ITEM NO-30 ADD 10% C.P |
| 7 | JCB machine with oprator & POL SOR 2025 P.NO 17 ITEM NO-27 ADD 10% C.P |
| 8 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil DSR 2023/2.28.1(RATE-34.15) |
| 9 | DRAIN WORKEarth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavatedearth lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil DSR 2.6.1 /2023 |
| 10 | Providing and laying OF 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources DSR 4.1.8/2023 |
| 11 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 2023 6.2.1 (RATE-6504.90) |
| 12 | 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) DSR 2023/13.4.1 (RATE-357.35) |
| 13 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources DSR 4.2.3/2023 |
| 14 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 2023 5.1.2 |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more DSR 5.22A.6 |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform dsr 2023/ 5.9.3 Please Enable Macros to View BoQ information |
