|
| 1 | Model-1:Model: AS55 DF P112, Code: 1900000950717270002, Batch:6/19, V1, i:33:2, Application : i) Neutralization tank agitator ii) Precipitation tanks in chemical house iii) Causticization tanks |
| 2 | Casing with flange (Part no. 2) for model-1 |
| 3 | Cover (Part no. 3) for model-1 |
| 4 | Internal support (Part no. 4) for model-1 |
| 5 | gasket (Part no. 5) for model-1 |
| 6 | gasket (Part no. 6) for model-1 |
| 7 | Extended 1st reduced pinion (Part no. 7) for model-1 |
| 8 | Bored 1st reduced pinion (Part no. 8) for model-1 |
| 9 | Gear wheel 1st reduction (Part no. 9) for model-1 |
| 10 | Gear wheel 2nd reduction (Part no. 10) for model-1 |
| 11 | Pinion 3rd reduction (Part no. 11) for model-1 |
| 12 | Gear wheel (Part no. 12) for model-1 |
| 13 | Cap (Part no. 13) for model-1 |
| 14 | Bored input shaft (Part no. 14) for model-1 |
| 15 | Oil seal (Part no. 15) for model-1 |
| 16 | Oil seal (Part no. 16) for model-1 |
| 17 | Gear head / box |
| 18 | In put assembly |
| 19 | Out put assembly |
| 20 | Bearing (Part no. 20) for model-1 |
| 21 | Bearing (Part no. 21) for model-1 |
| 22 | Bearing (Part no. 22) for model-1 |
| 23 | Bearing (Part no. 23) for model-1 |
| 24 | Bearing (Part no. 24) for model-1 |
| 25 | Key (Part no. 25) for model-1 |
| 26 | Key (Part no. 26) for model-1 |
| 27 | Key (Part no. 27) for model-1 |
| 28 | Key (Part no. 28) for model-1 |
| 29 | Key (Part no. 29) for model-1 |
| 30 | Level plug (Part no. 30) for model-1 |
| 31 | Drain plug (Part no. 31) for model-1 |
| 32 | Breather plug (Part no. 32) for model-1 |
| 33 | Parallel pin (Part no. 33) for model-1 |
| 34 | Parallel pin (Part no. 34) for model-1 |
| 35 | Hex head screw (Part no. 35) for model-1 |
| 36 | Hex head screw (Part no. 36) for model-1 |
| 37 | Hex head screw (Part no. 37) for model-1 |
| 38 | circlip (Part no. 38) for model-1 |
| 39 | circlip (Part no. 41) for model-1 |
| 40 | circlip (Part no. 42) for model-1 |
| 41 | 2 nd reduction pinioin (Part no. 45) for model-1 |
| 42 | out put shaft (Part no. 47) for model-1 |
| 43 | spacer ring (Part no. 48) for model-1 |
| 44 | circlip (Part no. 58) for model-1 |
| 45 | circlip (Part no. 39) for model-1 |
| 46 | Extended input shaft (Part no. 50) for model-1 |
| 47 | Key (Part no. 51) for model-1 |
| 48 | Input Assembly |
| 49 | Output assembly |
| 50 | Model-2:AS60 DF P112, Code: I 11799930001,Batch:4/10, V1, I:37:1, Application : Feed tank agitator - SSR |
| 51 | Casing with flange (Part no. 2) for model-2 |
| 52 | Cover (Part no. 3) for model-2 |
| 53 | Internal support (Part no. 4) for model-2 |
| 54 | gasket (Part no. 5) for model-2 |
| 55 | gasket (Part no. 6) for model-2 |
| 56 | Extended 1st reduced pinion (Part no. 7) for model-2 |
| 57 | Bored 1st reduced pinion (Part no. 8) for model-2 |
| 58 | Gear wheel 1st reduction (Part no. 9) for model-2 |
| 59 | Gear wheel 2nd reduction (Part no. 10) for model-2 |
| 60 | Pinion 3rd reduction (Part no. 11) for model-2 |
| 61 | Gear wheel (Part no. 12) for model-2 |
| 62 | Cap (Part no. 13) for model-2 |
| 63 | Bored input shaft (Part no. 14) for model-2 |
| 64 | Oil seal (Part no. 15) for model-2 |
| 65 | Oil seal (Part no. 16) for model-2 |
| 66 | Gear head / box |
| 67 | In put assembly |
| 68 | Out put assembly |
| 69 | Bearing (Part no. 20) for model-2 |
| 70 | Bearing (Part no. 21) for model-2 |
| 71 | Bearing (Part no. 22) for model-2 |
| 72 | Bearing (Part no. 23) for model-2 |
| 73 | Bearing (Part no. 24) for model-2 |
| 74 | Key (Part no. 25) for model-2 |
| 75 | Key (Part no. 26) for model-2 |
| 76 | Key (Part no. 27) for model-2 |
| 77 | Key (Part no. 28) for model-2 |
| 78 | Key (Part no. 29) for model-2 |
| 79 | Level plug (Part no. 30) for model-2 |
| 80 | Drain plug (Part no. 31) for model-2 |
| 81 | Breather plug (Part no. 32) for model-2 |
| 82 | Parallel pin (Part no. 33) for model-2 |
| 83 | Parallel pin (Part no. 34) for model-2 |
| 84 | Hex head screw (Part no. 35) for model-2 |
| 85 | Hex head screw (Part no. 36) for model-2 |
| 86 | Hex head screw (Part no. 37) for model-2 |
| 87 | circlip (Part no. 38) for model-2 |
| 88 | circlip (Part no. 41) for model-2 |
| 89 | circlip (Part no. 42) for model-2 |
| 90 | 2 nd reduction pinioin (Part no. 45) for model-2 |
| 91 | circlip (Part no. 58) for model-2 |
| 92 | circlip (Part no. 39) for model-2 |
| 93 | Extended input shaft (Part no. 50) for model-2 |
| 94 | Key (Part no. 51)for model-2 |
| 95 | Spacer ring (Part no. 46) for model-2 |
| 96 | Out put shaft (Part no. 49) for model-2 |
| 97 | circlip (Part no. 57) for model-2 |
| 98 | Input Assembly |
| 99 | Output assembly |
| 100 | Model-3:AS60 DF P132, Code:I11800030001, Batch:4/10, V1, I:33:4,Application : i) Filtrate tank agitator - SSR &ii) GSM tank - SSRiii) Clarifier underflow tank |
| 101 | Casing with flange (Part no. 2) for model-3 |
| 102 | Cover (Part no. 3) for model-3 |
| 103 | Internal support (Part no. 4) for model-3 |
| 104 | gasket (Part no. 5) for model-3 |
| 105 | gasket (Part no. 6) for model-3 |
| 106 | Extended 1st reduced pinion (Part no. 7) for model-3 |
| 107 | Bored 1st reduced pinion (Part no. 8) for model-3 |
| 108 | Gear wheel 1st reduction (Part no. 9) for model-3 |
| 109 | Gear wheel 2nd reduction (Part no. 10) for model-3 |
| 110 | Pinion 3rd reduction (Part no. 11) for model-3 |
| 111 | Gear wheel (Part no. 12) for model-3 |
| 112 | Cap (Part no. 13) for model-3 |
| 113 | Bored input shaft (Part no. 14) for model-3 |
| 114 | Oil seal (Part no. 15) for model-3 |
| 115 | Oil seal (Part no. 16) for model-3 |
| 116 | Gear head / box |
| 117 | In put assembly |
| 118 | Out put assembly |
| 119 | Bearing (Part no. 20) for model-3 |
| 120 | Bearing (Part no. 21) for model-3 |
| 121 | Bearing (Part no. 22) for model-3 |
| 122 | Bearing (Part no. 23) for model-3 |
| 123 | Bearing (Part no. 24) for model-3 |
| 124 | Key (Part no. 25) for model-3 |
| 125 | Key (Part no. 26) for model-3 |
| 126 | Key (Part no. 27) for model-3 |
| 127 | Key (Part no. 28) for model-3 |
| 128 | Key (Part no. 29) for model-3 |
| 129 | Level plug (Part no. 30) for model-3 |
| 130 | Drain plug (Part no. 31) for model-3 |
| 131 | Breather plug (Part no. 32) for model-3 |
| 132 | Parallel pin (Part no. 33) for model-3 |
| 133 | Parallel pin (Part no. 34) for model-3 |
| 134 | Hex head screw (Part no. 35) for model-3 |
| 135 | Hex head screw (Part no. 36) for model-3 |
| 136 | Hex head screw (Part no. 37) for model-3 |
| 137 | circlip (Part no. 38) for model-3 |
| 138 | circlip (Part no. 41) for model-3 |
| 139 | circlip (Part no. 42) for model-3 |
| 140 | 2 nd reduction pinioin (Part no. 45) for model-3 |
| 141 | circlip (Part no. 58) for model-3 |
| 142 | circlip (Part no. 39) for model-3 |
| 143 | Extended input shaft (Part no. 50) for model-3 |
| 144 | Key (Part no. 51) for model-3 |
| 145 | Spacer ring (Part no. 46) for model-3 |
| 146 | Out put shaft (Part no. 49) for model-3 |
| 147 | circlip (Part no. 57) for model-3 |
| 148 | Input Assembly |
| 149 | Output assembly |
| 150 | Model-4:AS60 DF P132 V1, code: I 11520980002, I: 25.47,Application : Dirty wash water tank |
| 151 | Casing with flange (Part no. 2) for model-4 |
| 152 | Cover (Part no. 3) for model-4 |
| 153 | Internal support (Part no. 4) for model-4 |
| 154 | gasket (Part no. 5) for model-4 |
| 155 | gasket (Part no. 6) for model-4 |
| 156 | Extended 1st reduced pinion (Part no. 7) for model-4 |
| 157 | Bored 1st reduced pinion (Part no. 8) for model-4 |
| 158 | Gear wheel 1st reduction (Part no. 9) for model-4 |
| 159 | Gear wheel 2nd reduction (Part no. 10) for model-4 |
| 160 | Pinion 3rd reduction (Part no. 11) for model-4 |
| 161 | Gear wheel (Part no. 12) for model-4 |
| 162 | Cap (Part no. 13) for model-4 |
| 163 | Bored input shaft (Part no. 14) for model-4 |
| 164 | Oil seal (Part no. 15) for model-4 |
| 165 | Oil seal (Part no. 16) for model-4 |
| 166 | Gear head / box |
| 167 | In put assembly |
| 168 | Out put assembly |
| 169 | Bearing (Part no. 20) for model-4 |
| 170 | Bearing (Part no. 21) for model-4 |
| 171 | Bearing (Part no. 22) for model-4 |
| 172 | Bearing (Part no. 23) for model-4 |
| 173 | Bearing (Part no. 24) for model-4 |
| 174 | Key (Part no. 25) for model-4 |
| 175 | Key (Part no. 26) for model-4 |
| 176 | Key (Part no. 27) for model-4 |
| 177 | Key (Part no. 28) for model-4 |
| 178 | Key (Part no. 29) for model-4 |
| 179 | Level plug (Part no. 30) for model-4 |
| 180 | Drain plug (Part no. 31) for model-4 |
| 181 | Breather plug (Part no. 32) for model-4 |
| 182 | Parallel pin (Part no. 33) for model-4 |
| 183 | Parallel pin (Part no. 34) for model-4 |
| 184 | Hex head screw (Part no. 35) for model-4 |
| 185 | Hex head screw (Part no. 36) for model-4 |
| 186 | Hex head screw (Part no. 37) for model-4 |
| 187 | circlip (Part no. 38) for model-4 |
| 188 | circlip (Part no. 41) for model-4 |
| 189 | circlip (Part no. 42) for model-4 |
| 190 | 2 nd reduction pinioin (Part no. 45) for model-4 |
| 191 | circlip (Part no. 58) for model-4 |
| 192 | circlip (Part no. 39) for model-4 |
| 193 | Extended input shaft (Part no. 50) for model-4 |
| 194 | Key (Part no. 51) for model-4 |
| 195 | Spacer ring (Part no. 46) for model-4 |
| 196 | Out put shaft (Part no. 49) for model-4 |
| 197 | circlip (Part no. 57) for model-4 |
| 198 | Input Assembly |
| 199 | Output assembly |
| 200 | Model-5:AS80 DF P160, Code:I11837100001,Batch:5/10, V1, I:31:2 & Application : Crystalizer tank agtitator |
| 201 | Casing with flange (Part no. 2) for model-5 |
| 202 | Cover (Part no. 3) for model-5 |
| 203 | Internal support (Part no. 4) for model-5 |
| 204 | gasket (Part no. 5) for model-5 |
| 205 | gasket (Part no. 6) for model-5 |
| 206 | Extended 1st reduced pinion (Part no. 7) for model-5 |
| 207 | Bored 1st reduced pinion (Part no. 8) for model-5 |
| 208 | Gear wheel 1st reduction (Part no. 9) for model-5 |
| 209 | Gear wheel 2nd reduction (Part no. 10) for model-5 |
| 210 | Pinion 3rd reduction (Part no. 11) for model-5 |
| 211 | Gear wheel (Part no. 12) for model-5 |
| 212 | Cap (Part no. 13) for model-5 |
| 213 | Bored input shaft (Part no. 14) for model-5 |
| 214 | Oil seal (Part no. 15) for model-5 |
| 215 | Oil seal (Part no. 16) for model-5 |
| 216 | Gear head / box |
| 217 | In put assembly |
| 218 | Out put assembly |
| 219 | Bearing (Part no. 20) for model-5 |
| 220 | Bearing (Part no. 21) for model-5 |
| 221 | Bearing (Part no. 22) for model-5 |
| 222 | Bearing (Part no. 23) for model-5 |
| 223 | Bearing (Part no. 24) for model-5 |
| 224 | Key (Part no. 25) for model-5 |
| 225 | Key (Part no. 26) for model-5 |
| 226 | Key (Part no. 27) for model-5 |
| 227 | Key (Part no. 28) for model-5 |
| 228 | Key (Part no. 29) for model-5 |
| 229 | Level plug (Part no. 30) for model-5 |
| 230 | Drain plug (Part no. 31) for model-5 |
| 231 | Breather plug (Part no. 32) for model-5 |
| 232 | Parallel pin (Part no. 33) for model-5 |
| 233 | Parallel pin (Part no. 34) for model-5 |
| 234 | Hex head screw (Part no. 35) for model-5 |
| 235 | Hex head screw (Part no. 36) for model-5 |
| 236 | Hex head screw (Part no. 37) for model-5 |
| 237 | circlip (Part no. 38) for model-5 |
| 238 | circlip (Part no. 41) for model-5 |
| 239 | circlip (Part no. 42) for model-5 |
| 240 | 2 nd reduction pinioin (Part no. 45) for model-5 |
| 241 | circlip (Part no. 58) for model-5 |
| 242 | circlip (Part no. 39) for model-5 |
| 243 | Extended input shaft (Part no. 50) for model-5 |
| 244 | Key (Part no. 51) for model-5 |
| 245 | Spacer ring (Part no. 46) for model-5 |
| 246 | circlip (Part no. 40) for model-5 |
| 247 | Out put shaft (Part no. 49) for model-5 |
| 248 | circlip (Part no. 57) for model-5 |
| 249 | Spacer ring (Part no. 59) for model-5 |
| 250 | circlip (Part no. 39) for model-5 |
| 251 | Input Assembly |
| 252 | Output assembly |
| 253 | Model:6AS55 F P100, Code: I11825510001 / 2, Batch:5/10, V1, i: 25:84,Application : Mother liquor tank agitator -SSR |
| 254 | Casing with flange (Part no. 2) for model-6 |
| 255 | Cover (Part no. 3) for model-6 |
| 256 | Cap (Part no. 5) for model-6 |
| 257 | Internal support (Part no. 4) for model-6 |
| 258 | gasket (Part no. 6) for model-6 |
| 259 | gasket (Part no. 7) for model-6 |
| 260 | Extended 1st reduced pinion (Part no. 8) for model-6 |
| 261 | Bored 1st reduced pinion (Part no. 9) for model-6 |
| 262 | Gear wheel 1st reduction (Part no. 10) for model-6 |
| 263 | Pinion 2nd reduction (Part no. 11) for model-6 |
| 264 | Gear wheel, 2nd reduction (Part no. 12) for model-6 |
| 265 | Bored input shaft (Part no. 13) for model-6 |
| 266 | Extended input shaft (Part no. 14) for model-6 |
| 267 | Oil seal (Part no. 15) for model-6 |
| 268 | Oil seal (Part no. 16) for model-6 |
| 269 | Gear head / box |
| 270 | In put assembly |
| 271 | Out put assembly |
| 272 | Bearing (Part no. 20) for model-6 |
| 273 | Bearing (Part no. 21) for model-6 |
| 274 | Bearing (Part no. 22) for model-6 |
| 275 | Key (Part no. 23) for model-6 |
| 276 | Key (Part no. 24) for model-6 |
| 277 | Key (Part no. 25) for model-6 |
| 278 | Key (Part no. 26) for model-6 |
| 279 | Key (Part no. 27) for model-6 |
| 280 | Key (Part no. 28) for model-6 |
| 281 | Level plug (Part no. 29) for model-6 |
| 282 | Drain plug (Part no. 30) for model-6 |
| 283 | Breather plug (Part no. 31) for model-6 |
| 284 | Parallel pin (Part no. 32) for model-6 |
| 285 | Parallel pin (Part no. 33) for model-6 |
| 286 | Hex head screw (Part no. 34) for model-6 |
| 287 | Hex head screw (Part no. 35) for model-6 |
| 288 | Hex head screw (Part no. 36) for model-6 |
| 289 | circlip (Part no. 37) for model-6 |
| 290 | circlip (Part no. 38) for model-6 |
| 291 | circlip (Part no. 39) for model-6 |
| 292 | circlip (Part no. 40) for model-6 |
| 293 | circlip (Part no. 43) for model-6 |
| 294 | out put shaft (Part no. 41) for model-6 |
| 295 | Spacer ring (Part no. 42) for model-6 |
| 296 | Spacer ring (Part no. 46) for model-6 |
| 297 | Input Assembly |
| 298 | Output assembly |
| 299 | Model-7:AS30 F P80 V1, code: I 11415010002, i- 24.19, Application : Agitators of Floculant Transfer Tanks(14 V - 13C/D) |
| 300 | Casing with flange (Part no.2) for model-7 |
| 301 | Casing with reducer flange (Part no.2/1) for model-7 |
| 302 | Cover (Part no.3) for model-7 |
| 303 | Internal support (Part no.4) for model-7 |
| 304 | Second recuction pinion (Part no.5) for model-7 |
| 305 | 1 st recduction gear wheel (Part no.6) for model-7 |
| 306 | Extended 1st reduced pinion (Part no.7) for model-7 |
| 307 | Bored 1st reduced pinion (Part no.8) for model-7 |
| 308 | Bored input shaft (Part no.9) for model-7 |
| 309 | Extended input shaft (Part no.10) for model-7 |
| 310 | Gasket (Part no.11) for model-7 |
| 311 | Gasket (Part no.12) for model-7 |
| 312 | Oil seal (Part no.19) for model-7 |
| 313 | Oil seal (Part no.20) for model-7 |
| 314 | Gear head / box |
| 315 | In put assembly |
| 316 | Out put assembly |
| 317 | Bearing (Part no.16) for model-7 |
| 318 | Bearing (Part no.17) for model-7 |
| 319 | Bearing (Part no.18) for model-7 |
| 320 | Key (Part no.21) for model-7 |
| 321 | Key (Part no.22) for model-7 |
| 322 | Key (Part no.23) for model-7 |
| 323 | Key (Part no.25) for model-7 |
| 324 | circlip (Part no.26) for model-7 |
| 325 | circlip (Part no.27) for model-7 |
| 326 | circlip (Part no.28) for model-7 |
| 327 | circlip (Part no.29) for model-7 |
| 328 | circlip (Part no.48) for model-7 |
| 329 | circlip (Part no.49) for model-7 |
| 330 | circlip (Part no.31) for model-7 |
| 331 | Parallel pin (Part no.32) for model-7 |
| 332 | Parallel pin (Part no.33) for model-7 |
| 333 | Washer (Part no.34) for model-7 |
| 334 | Drain Plug for mod-7 |
| 335 | Hex head screw (Part no.35) for model-7 |
| 336 | Hex head screw (Part no.36) for model-7 |
| 337 | Hex head screw (Part no.37) for model-7 |
| 338 | Stud bolts for mod-7 |
| 339 | Hexagonal nutfor mod-7 |
| 340 | Spacer ring (Part no.38) for model-7 |
| 341 | Key (Part no.24) for model-7 |
| 342 | circlip (Part no.30) for model-7 |
| 343 | Out put shaft (Part no.44) for model-7 |
| 344 | 2nd reduction gear wheel (Part no.45) for model-7 |
| 345 | Spacer ring (Part no.46) for model-7 |
| 346 | Cap (Part no.47) for model-7 |
| 347 | Input Assembly |
| 348 | Output assembly |
| 349 | Model-8:AS45 F P100 V1, Code: I 11072210004, i-25.55,Application : AGITATORSof Floculant Preparation Tanks (14V - 12 A/B/C/D ) |
| 350 | Casing with flange (Part no. 2) for model-8 |
| 351 | Cover (Part no. 3) for model-8 |
| 352 | Cap (Part no. 5) for model-8 |
| 353 | Internal support (Part no. 4) for model-8 |
| 354 | gasket (Part no. 6) for model-8 |
| 355 | gasket (Part no. 7) for model-8 |
| 356 | Extended 1st reduced pinion (Part no. 8) for model-8 |
| 357 | Bored 1st reduced pinion (Part no. 9) for model-8 |
| 358 | Gear wheel 1st reduction (Part no. 10) for model-8 |
| 359 | Pinion 2nd reduction (Part no. 11) for model-8 |
| 360 | Gear wheel, 2nd reduction (Part no. 12) for model-8 |
| 361 | Bored input shaft (Part no. 13) for model-8 |
| 362 | Extended input shaft (Part no. 14) for model-8 |
| 363 | Oil seal (Part no. 15) for model-8 |
| 364 | Oil seal (Part no. 16) for model-8 |
| 365 | Gear head / box |
| 366 | In put assembly |
| 367 | Out put assembly |
| 368 | Bearing (Part no. 20) for model-8 |
| 369 | Bearing (Part no. 21) for model-8 |
| 370 | Bearing (Part no. 22) for model-8 |
| 371 | Key (Part no. 23) for model-8 |
| 372 | Key (Part no. 24) for model-8 |
| 373 | Key (Part no. 25) for model-8 |
| 374 | Key (Part no. 26) for model-8 |
| 375 | Key (Part no. 27) for model-8 |
| 376 | Key (Part no. 28) for model-8 |
| 377 | Level plug (Part no. 29) for model-8 |
| 378 | Drain plug (Part no. 30) for model-8 |
| 379 | Breather plug (Part no. 31) for model-8 |
| 380 | Parallel pin (Part no. 32) for model-8 |
| 381 | Parallel pin (Part no. 33) for model-8 |
| 382 | Hex head screw (Part no. 34) for model-8 |
| 383 | Hex head screw (Part no. 35) for model-8 |
| 384 | Hex head screw (Part no. 36) for model-8 |
| 385 | circlip (Part no. 37) for model-8 |
| 386 | circlip (Part no. 38) for model-8 |
| 387 | circlip (Part no. 39) for model-8 |
| 388 | circlip (Part no. 40) for model-8 |
| 389 | circlip (Part no. 43) for model-8 |
| 390 | out put shaft (Part no. 41) for model-8 |
| 391 | Spacer ring (Part no. 42) for model-8 |
| 392 | Spacer ring (Part no. 46) for model-8 |
| 393 | Input Assembly |
| 394 | Output assembly |
| 395 | Model-9:AS45 F P100 B5 V1, Code: 16A000006012210001, i-15.83,Application : Agitators for Floculant Transfer Tanks (14 V - 13 A / B) |
| 396 | Casing with flange (Part no. 2) for model-9 |
| 397 | Cover (Part no. 3) for model-9 |
| 398 | Cap (Part no. 5) for model-9 |
| 399 | Internal support (Part no. 4) for model-9 |
| 400 | gasket (Part no. 6) for model-9 |
| 401 | gasket (Part no. 7) for model-9 |
| 402 | Extended 1st reduced pinion (Part no. 8) for model-9 |
| 403 | Bored 1st reduced pinion (Part no. 9) for model-9 |
| 404 | Gear wheel 1st reduction (Part no. 10) for model-9 |
| 405 | Pinion 2nd reduction (Part no. 11) for model-9 |
| 406 | Gear wheel, 2nd reduction (Part no. 12) for model-9 |
| 407 | Bored input shaft (Part no. 13) for model-9 |
| 408 | Extended input shaft (Part no. 14) for model-9 |
| 409 | Oil seal (Part no. 15) for model-9 |
| 410 | Oil seal (Part no. 16) for model-9 |
| 411 | Gear head / box |
| 412 | In put assembly |
| 413 | Out put assembly |
| 414 | Bearing (Part no. 20) for model-9 |
| 415 | Bearing (Part no. 21) for model-9 |
| 416 | Bearing (Part no. 22) for model-9 |
| 417 | Key (Part no. 23) for model-9 |
| 418 | Key (Part no. 24) for model-9 |
| 419 | Key (Part no. 25) for model-9 |
| 420 | Key (Part no. 26) for model-9 |
| 421 | Key (Part no. 27) for model-9 |
| 422 | Key (Part no. 28) for model-9 |
| 423 | Level plug (Part no. 29) for model-9 |
| 424 | Drain plug (Part no. 30) for model-9 |
| 425 | Breather plug (Part no. 31) for model-9 |
| 426 | Parallel pin (Part no. 32) for model-9 |
| 427 | Parallel pin (Part no. 33) for model-9 |
| 428 | Hex head screw (Part no. 34) for model-9 |
| 429 | Hex head screw (Part no. 35) for model-9 |
| 430 | Hex head screw (Part no. 36) for model-9 |
| 431 | circlip (Part no. 37) for model-9 |
| 432 | circlip (Part no. 38) for model-9 |
| 433 | circlip (Part no. 39) for model-9 |
| 434 | circlip (Part no. 40) for model-9 |
| 435 | circlip (Part no. 43) for model-9 |
| 436 | out put shaft (Part no. 41) for model-9 |
| 437 | Spacer ring (Part no. 42) for model-9 |
| 438 | Spacer ring (Part no. 46) for model-9 |
| 439 | Input Assembly |
| 440 | Output assembly |
| 441 | Model-10:AS45 F P100 V1, Code: I11415320003, i-27.45,Application : i) Product Holding Tanks ( 8V - 2A/B)& ii) Strong liquor OHT tank |
| 442 | Casing with flange (Part no. 2) for model-10 |
| 443 | Cover (Part no. 3) for model-10 |
| 444 | Cap (Part no. 5) for model-10 |
| 445 | Internal support (Part no. 4) for model-10 |
| 446 | gasket (Part no. 6) for model-10 |
| 447 | gasket (Part no. 7) for model-10 |
| 448 | Extended 1st reduced pinion (Part no. 8) for model-10 |
| 449 | Bored 1st reduced pinion (Part no. 9) for model-10 |
| 450 | Gear wheel 1st reduction (Part no. 10) for model-10 |
| 451 | Pinion 2nd reduction (Part no. 11) for model-10 |
| 452 | Gear wheel, 2nd reduction (Part no. 12) for model-10 |
| 453 | Bored input shaft (Part no. 13) for model-10 |
| 454 | Extended input shaft (Part no. 14) for model-10 |
| 455 | Oil seal (Part no. 15) for model-10 |
| 456 | Oil seal (Part no. 16) for model-10 |
| 457 | Gear head / box |
| 458 | In put assembly |
| 459 | Out put assembly |
| 460 | Bearing (Part no. 20) for model-10 |
| 461 | Bearing (Part no. 21) for model-10 |
| 462 | Bearing (Part no. 22) for model-10 |
| 463 | Key (Part no. 23) for model-10 |
| 464 | Key (Part no. 24) for model-10 |
| 465 | Key (Part no. 25) for model-10 |
| 466 | Key (Part no. 26) for model-10 |
| 467 | Key (Part no. 27) for model-10 |
| 468 | Key (Part no. 28) for model-10 |
| 469 | Level plug (Part no. 29) for model-10 |
| 470 | Drain plug (Part no. 30) for model-10 |
| 471 | Breather plug (Part no. 31) for model-10 |
| 472 | Parallel pin (Part no. 32) for model-10 |
| 473 | Parallel pin (Part no. 33) for model-10 |
| 474 | Hex head screw (Part no. 34) for model-10 |
| 475 | Hex head screw (Part no. 35) for model-10 |
| 476 | Hex head screw (Part no. 36) for model-10 |
| 477 | circlip (Part no. 37) for model-10 |
| 478 | circlip (Part no. 38) for model-10 |
| 479 | circlip (Part no. 39) for model-10 |
| 480 | circlip (Part no. 40) for model-10 |
| 481 | circlip (Part no. 43) for model-10 |
| 482 | out put shaft (Part no. 41) for model-10 |
| 483 | Spacer ring (Part no. 42) for model-10 |
| 484 | Spacer ring (Part no. 46) for model-10 |
| 485 | Model-11:(Newly addedmodel)AS55 FP 112, Code: I11825510001 / 2, Batch:5/10, V1, i:25:84 Application : i) Mother liquor tank agitator- CCRii) seal pot |
| 486 | Casing with flange(part no.2) for model-11 |
| 487 | Cover (part no.3)for model-11 |
| 488 | Internal support (part no.4)for model-11 |
| 489 | gasket (Part no.5)for model-11 |
| 490 | gasket (part no.6 f)for model-11 |
| 491 | Extended 1st reduced pinion (part no.7) for model-11 |
| 492 | Bored 1st reduced pinion (part no.8) for model-11 |
| 493 | Gear wheel 1st reduction (part no.9)for model-11 |
| 494 | Gear wheel 2nd reduction (part no.10)for model-11 |
| 495 | Pinion 3rd reduction (part no.11) for model-11 |
| 496 | Gear wheel (part no.12)for model-11 |
| 497 | Cap (part no.13)for model-11 |
| 498 | Bored input shaft (part no.14) for model-11 |
| 499 | Oil seal (part no.15) for model-11 |
| 500 | Oil seal (part no.16) for model-11 |
| 501 | Bearing (part no.17) for model-11 |
| 502 | Bearing (part no.18) for model-11 |
| 503 | Bearing (partno.19)for model-11 |
| 504 | Bearing (part no.20)for model-11 |
| 505 | Bearing (part no.21) for model-11 |
| 506 | Bearing (part no.22) for model-11 |
| 507 | Bearing (part no.23) for model-11 |
| 508 | Bearing (part no.24)for model-11 |
| 509 | Key (part no.25) for model-11 |
| 510 | Key (part no.26) for model-11 |
| 511 | Key (part no.27) for model-11 |
| 512 | Key (part no.28) for model-11 |
| 513 | Key (part no.29) for model-11 |
| 514 | Level plug (part no.30) for model-11 |
| 515 | Drain plug (part no.31) for model-11 |
| 516 | Breather plug (part no.32) for model-11 |
| 517 | Parallel pin (part no.33) for model-11 |
| 518 | Parallel pin (part no.34) for model-11 |
| 519 | Hex head screw (part no.35) for model-11 |
| 520 | Hex head screw (part no.36) for model-11 |
| 521 | Hex head screw (part no.37) for model-11 |
| 522 | circlip (part no.38) for model-11 |
| 523 | circlip (part no.41) for model-11 |
| 524 | circlip (partno.42) for model-11 |
| 525 | 2 nd reduction pinioin (part no.45) for model-11 |
| 526 | out put shaft (part no.47) for model-11 |
| 527 | spacer ring (part no.48) for model-11 |
| 528 | circlip (part no.58) for model-11 |
| 529 | circlip (pat no.39) for odel-11 |
| 530 | Extended input shaft (part no.50) for model-11 |
| 531 | Key (part no.51) for model-11 |
| 532 | Input Assembly |
| 533 | Output assembly |
| 534 | Model-12:(Newly addedmodel) AS 35 FP 100 ;V1, I:15.37Application :i) Agitators offloculant preparation at UCTL-3 Chemical house |
| 535 | Casing with flange (part no.2) for model-12 |
| 536 | Casing with reducer flange (part no.2/1) for model-12 |
| 537 | Cover (part no.3) for model-12 |
| 538 | Internal support (part no.4) for model-12 |
| 539 | Second recuction pinion (part no.5) for model-12 |
| 540 | 1 st recduction gear wheel (part no.6) for model-12 |
| 541 | Extended 1st reduced pinion (part no.7) for model-12 |
| 542 | Bored 1st reduced pinion (part no.8) for model-12 |
| 543 | Bored input shaft (part no.9) for model-12 |
| 544 | Extended input shaft (part no.10) for model-12 |
| 545 | Gasket (part no.11) for model-12 |
| 546 | Gasket (part no.12) for model-12 |
| 547 | Oil seal (part no.19) for model-12 |
| 548 | Oil seal (part no.20) for model-12 |
| 549 | Bearing (part no.13) for model-12 |
| 550 | Bearing (part no.14) for model-12 |
| 551 | Bearing (part no.15) for model-12 |
| 552 | Bearing (part no.16) for model-12 |
| 553 | Bearing (part no.17) for model-12 |
| 554 | Bearing (part no.18) for model-12 |
| 555 | Key (part no.21) for model-12 |
| 556 | Key (part no.22) for model-12 |
| 557 | Key (part no.23) for model-12 |
| 558 | Key (part no.25) for model-12 |
| 559 | circlip (part no.26) for model-12 |
| 560 | circlip (part no.27) for model-12 |
| 561 | circlip (part no.28) for model-12 |
| 562 | circlip (part no.29) for model-12 |
| 563 | circlip (part no.48) for model-12 |
| 564 | circlip (part no.49) for model-12 |
| 565 | circlip (part no.31) for model-12 |
| 566 | Parallel pin (part no.32) for model-12 |
| 567 | Parallel pin (part no.33) for model-12 |
| 568 | Washer (part no.34) for model-12 |
| 569 | Drain plug (part no.29) for model-12 |
| 570 | Hex head screw (part no.35) for model-12 |
| 571 | Hex head screw (part no.36) for momdel-12 |
| 572 | Hex head screw (part no.37) for model-12 |
| 573 | stud bolts (part no.36)for model-12 |
| 574 | Hexagonal nut (part no.37) for model-12 |
| 575 | Spacer ring (part no.38) for model-12 |
| 576 | Key (part no.24) for model-12 |
| 577 | circlip (part no.30) for model-12 |
| 578 | Out put shaft (part no.44) for model-12 |
| 579 | 2nd reduction gear wheel (Part no.45) for model-12 |
| 580 | Spacr ring (part no.46) for model-2 |
| 581 | Cap (part no.47) for model-12 |
| 582 | Input Assembly |
| 583 | Otput Assembly |