|
| 1 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 2 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 3 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 4 | 250x16 mm |
| 5 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 6 | 200x10 mm |
| 7 | 150x10 mm |
| 8 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 9 | 125 mm |
| 10 | 100 mm |
| 11 | 75 mm |
| 12 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 13 | Twin rubber stopper |
| 14 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 15 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 16 | Renewing glass panes and refixing existing wooden fillets : |
| 17 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 18 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. |
| 19 | Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : |
| 20 | With F.P.S. brick tiles |
| 21 | White washing with lime to give an even shade : |
| 22 | Old work (two or more coats) . |
| 23 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 24 | Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- |
| 25 | (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. |
| 26 | (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed withwater. |
| 27 | (iii) Chlorination of RCC internal surface by liquid chlorine. |
| 28 | (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. |
| 29 | (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. |
| 30 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 31 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 32 | Orissa pattern W.C. pan of size 580x440 mm |
| 33 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 34 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 35 | 10 litre capacity - White |
| 36 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 37 | White solid plastic seat with lid |
| 38 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. a) Semi rigid pipe |
| 39 | 32 mm dia |
| 40 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 41 | Rectangular shape 453x357 mm |
| 42 | Providing and fixing brass bib cock of approved quality : |
| 43 | 15 mm nominal bore |
| 44 | Providing and fixing brass stop cock of approved quality : |
| 45 | 15 mm nominal bore |
| 46 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 47 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 48 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 49 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 50 | Providing and fixing uplasticised PVC connection pipe with brass unions : a) 45 cm length |
| 51 | 15 mm nominal bore |
| 52 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 53 | 20 mm nominal outer dia. Pipes. |
| 54 | Providing repairs tojoints of P-trap/floor traps with cement mortar 1:1 (1Cement :1fine sand)mixed with Dr.Fixit water proofing compound as per manufacturer\"s specifications including dismantling of floor, cleaning of joints, soaking, curing and making good the floor all complete as per the directions of the Engineer in charge. |
| 55 | Repairs of existing PVC cisterns copmplete as per direction of EIC including fixing of necessary screws, washers/ teflon tape |
| 56 | Replacement of PVC syphon |
| 57 | Replacement of PVC Float including resting levers and knobs. |
| 58 | Rubber washers for PVC syphons |
| 59 | Cleaning of blocked floor traps,nahani traps and WC seats to obtain smooth flow of sewage all complete as per the direction of E-I-C. |
| 60 | Cleaning of septic tank including removal of sludge, human excreta and other waste matter accumulated in the tank and disposal of the same to the dumping ground outside the municipal limits all complete as per the direction of E-I-C. |
| 61 | Above 50 users capacity |
| 62 | Clearing of choked sewer manhole and removing all rubbish etc. i/c removal of blockage of sewer line from one manhole to other manholeby rodding and flushing with plenty of water complete in all respect ,as per the directions of Engineer-in-Charge. |
| 63 | Minor repairs to existing wooden doors, windows shutters to ensure its proper operationcarrying out necessary repairs like planing, fixing screws etc all complete as per the direction of E-I-C.(Note:-The rate includes the cost of hinges,screws and nails wherever necessary) |
| 64 | Repairs to existing aluminiumdoors including taking out and refixing the same after applying necessary repairs all complete as per the directions ofthe Engineer in charge.(The rate includes the cost of PVC gasket, snap beading , screws, hinges, pivots etc. wherever necessary.) |
| 65 | Removal of plants from building including uprooting, pouring acid and finishing by cement mortar of mix 1:2 etc complete. |
| 66 | From walls upto 3 storey with the help of zoola including taking necessary safety mesures. |
