|
| 1 | M&L for providing and injecting chemical emulsion for post constructional antitermite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 2 | M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors/surface complete all as specified and directed. |
| 3 | M&L for treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing surface complete all as specified and directed. |
| 4 | M&L for treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 5 | M&L for cement concrete 75mm thick type C2, 1:3:6 (using 40mm graded aggregate) as plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 6 | Material and labour for vitrified ceramic tiles (double charged) 9-10mm thick (square/rectangular) polished area of each tiles exc 0.36 Sqm but n.exc. 0.42 Sqm as in floor setin neat cement slurry over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 7 | All as per item No. 6 above but in skirting/dado in CM 1:4. |
| 8 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint on new plastered surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including 1mm thick wall care putty and priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 9 | M&L for complete removal of existing treatment on old decorated surface and applying two or more coats of 100% Premium acrylic emulsion paint on new plastered surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including 1mm thick wall care putty and priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 10 | Material and labour for joint free non skid ceramic colouredtiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm in floors etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6)complete all as specified and directed. |
| 11 | Material and labour for digital glazed ceramic joint free(rectified) coloured tiles on vetical surfaces size 350x250x7mm /450x350x7mm thick etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, fixed over & including 15mm thick rendering in CM 1:4complete all as specified and directed. |
| 12 | M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) as in levelling course of floors, making surface even and rough to receive the finishing top surface of the floor complete all as specified and directed. |
| 13 | Demolition of concrete in ground floors and pavings n.exc. 15cm thickness below or above ground level complete all as specified and directed. |
| 14 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces of wallfinished surface even and smooth (without using extra cement) work or concrete surfaces in CM 1:6 complete all as specified and directed. |
| 15 | M&L for taking down plastering in cement lime or cement mortar on brick or stone masonary including removal of debris complete all as specified and directed. |
