|
| 1 | M&L for surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed. |
| 2 | Excavating in trenches n exc1.5 m wide and n exc 1.5 m in depth and getting out in soft/ loose soilfor foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc and for laying ofpipe/cablenexc 10 sqm on plan complete all as specified and directed. |
| 3 | Returning, filling inincluding spreading leveling watering and well ramming in layers n exc 25 cm thick all as specifiedand directed by Engineer-in-Charge. |
| 4 | Earth filling under floor, including spreading, leveling, watering and well rammingin layers n.exc 25 cm in soft/loose soilcomplete all as specified and directed. |
| 5 | Removing excavated material to a distance exc 1.5but n exc 5.0 Kmand depositing where directed above starting point complete all as specified and directed by the Engineer -in-charge. |
| 6 | M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete completed all as specified and directed. |
| 7 | M&L for reinforcement cement concrete (Design Mix) M-25(using 20 mm graded aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-rammed piles and mass concrete complete all as specified and directed. |
| 8 | M&L for reinforcement cement concrete (Design Mix) M-25 (using 20 mm graded aggregate) as in columns,pillars, piers, posts & struts complete all as spd & directed. |
| 9 | M&L for reinforcementcement concrete (Design Mix) M-25 (using 20 mm graded aggregate) as in slabs , roof projections etccomplete all as specified and directed. |
| 10 | M&L for reinforcement cement concrete (Design Mix) M-25 (using 20mm graded aggregate) as in roof beams, cantilevers bressummers, lintels over 1.5m span complete all as specified and directed. |
| 11 | M&L for reinforcement cement concrete (Design Mix) M-25 (using 20mm graded aggregate) as in chajjas complete all as specified and directed. |
| 12 | M&L for TMT bars 10 mm dia and over cut to length, bent to shape as required incl cranking bending hooking ends and binding with mild steel wire (annealed ) not less than 0.9 mm dia for lintel, column,footing and any other structural member complete all as specified and as directed. |
| 13 | M&L TMT Bars8 mm dia, cut to length, bent to shape as required including cranking, bending, hooking ends and binding with MS Wire (annealed) not less than 0.9 mm dia, as in stirrups for column, plinth beam, beam and lilten spaces and binders complete all as specified and as directed. |
| 14 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) complete all as spd and directed. |
| 15 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams sides and soffits (if any) of foundation and plinth beam and similar work as in flat surfacecomplete all as specified and directed. |
| 16 | Formwork to sides and soffits of floor or roof beams,beam haunching,girders,bresummers,lintels,cantilevers,shelves including supports,overhangs etc also spays between floors and beams as in flat surface complete all as specified and directed |
| 17 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions as in flat surface complete all as specified and directed. |
| 18 | Formwork to chullah hoods, chajjas, troughs and similar items including edges as in flat surface complete all as specified and directed. |
| 19 | M&L for ATT as treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 20 | M&L for Anti Termite Treatment for flooring as treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. |
| 21 | M&L for Anti Termite Treatment as treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface areacomplete all as specified and directed. |
| 22 | M&L for Anti Termite Treatment as treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed. |
| 23 | M&L for 75 mm thick cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as in sub base of flooring etc complete all as specified and as directed. |
| 24 | M&L for 25 mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in flooring etc complete all as specified and as directed. |
| 25 | M&L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed compelet all as specified and directed |
| 26 | M & L for brick work with sub class \"B\" bricks, oldsizes , straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as spd and as directed. |
| 27 | M&L brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in halfbrick wall built in CM 1:4 complete all as specified and as directed. |
| 28 | M&L for rendering 15 mm thick (in two coats of 10 mm and 5 mm thick) on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with integral water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note: - Water proofing compound shall be measured and paid for separately. |
| 29 | M&L for plastering 10 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 30 | M&L for plastering 5 mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed. |
| 31 | Supply only liquid water proofing compound completed all as specified |
| 32 | M&L machine cut kota stone slab flooring 20-25 mm thick over and including 20 mm thick cement screed base in CM (1:6)laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as soecified and directed. |
| 33 | M&L machine cut kota stone slab20-25 mm thick in riser of steps, skirting, dado and pillar over and including 15 mm thick cement plaster in CM (1:4)laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as soecified and directed. |
| 34 | M&L for non skid ceramic colouredtilesof 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors set and jointed and filled with epoxy and pointed in white or coloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement & sand mortar 1:6complete all as specified and as directed. |
| 35 | M&L for coloured glazed ceramic tiles 600 x 300 x 8-9 mm thickon vertical surfaces such as skirting/dados etc,set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including rendering 10 mm thick in CM 1:4 on wallcomplete all as specified and directed. |
| 36 | M&L for apply acrlic based waterproofing flexible liquid applied single component, weather resistant acrylic waterproofing membrane for all types of exposed roof slabs (new and old) terraces (slopped and flat) etc using ultra voilet rays and heat reflecting system Complete all as specified and directed NOte : Water proofing treatment shall be applied through authorised applicator of the manufacturer |
| 37 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window /Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100 gms) fabricate with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (Edge) minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property and fire retardant fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia & length complete all as specified and directed |
| 38 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window /Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100 gms) fabricate with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (Edge) minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property and fire retardant fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia & length complete all as specified and directed |
| 39 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 40 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 41 | S&F of Factory made wire gauzed PVC door shutter 28 to 30 mm thick (style) consisting of wire gauze in lieu of PVC sheet panel inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) frame made out of MS tubes for top & bottom rails.The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly. MS frame shall be covered with heat moulded decorative colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, suppling & fixing in the frame at site as per specification & drawing in SSR Part II.complete all as specified and as directed. |
| 42 | S&F steel windows with side hung shutters incl Box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed. |
| 43 | S&F steel windows with side hung shutters incl Box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed. |
| 44 | S&F framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290 Gde-E-165 complete all as specified and as directed. |
| 45 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 46 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 47 | Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide zink chromeprimer complete all as specified and as directed. |
| 48 | S&F100 mm long SS butt hinges medium weight, complete all as specified and directed . |
| 49 | S&F SS 150 mm long barrel tower bolts of extruded section & fixed complete all as specified and directed. |
| 50 | S&F SS 150 mm sizehandles cast type anodized complete all as specifed and directed |
| 51 | S & F 250 mm long SS, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 52 | S&F of brass door spring of size 300 mm to wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as specified and directed. |
| 53 | S&F Vitreous China Squatting pan, \"Orissa\" pattern, size 580 x 440 mm white with integral foot rests (Cat Pt No C0117 Make Parryware) complete all as specified and as directed. |
| 54 | S&F Vitreous China Ware Wash hand basin oval type white, of (550 x 445) mm size, with 32 mm dia stainless steel waste coupling of Make Jaquar (Cat Pt No ALD-705L130) & CI brackets including cutting for and pinning ends of brackets or erecting stand complete of Make Parryware \"Cascade NXT\" Cat Part No C0407 or equialent make as approved. |
| 55 | S&FVitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) incl S&Furinal spreader of CP for fixing with 15 mm dia pipe.(Minimum weight 60 gms). Complete all as spd and directed. |
| 56 | S&F PVC body valve less syphonic action type flushing cistern white low level with inlet ball valve float and handle including brackets 10 lits capacity fixed in repairs. (Make : Parryware Slimline standard Code No C8297) |
| 57 | S&F Mirror 600 x 450 mm, beveled Edge, Selected quality Glass, mounted on 6 mm thick AC Building Board or Commercial Plywood and fixed to Wooden Plugs with Chromium plated Brass Screws and Cup Washers and fixed-in-repairs complete all as specified and as directed. |
| 58 | S&F Brass Chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, complete all as specified and as directed. |
| 59 | S&FCP soap dish with glass finish (Glossy) complete all as specified and directed. |
| 60 | S & F stainless steel curtain rod including bracket and holder made out of stainless steel sheet of grade X 02Cr19Ni1O (304 S2), surface finish No. 4 as per IS 6911: 2017, 25 mm dia complete all as specified and as directed. |
| 61 | S & F fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed quarter turn with water saving nozzle”, complete all as specified and as directed. |
| 62 | S & Ffancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"hot\" or \"cold\"with long screwed shanks and fly nuts, screwed for iron pipe and fixed quarter turn with water saving nozzle”, complete all as specified and as directed. |
| 63 | S&F 15 mm fancy type CP Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 64 | S & F brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as spd and as directed. |
| 65 | S&F PVC connections 15 mm size of PTMT of 600 mm long complete all as specified and directed. |
| 66 | S & F flexible (coil shaped) PVC waste pipe for wash basin and urinal (as required dia) with length not less than 700 mm connected to PVC waste fittings complete all as specified and as directed. |
| 67 | S&F PVC (SWR) 75 mm bore floor trapplain with grating including joints with solvent cement complete all as specified and directed. |
| 68 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints and jointed with adhesive and laid in floors/ trenches/walls (110 mm bore) etc complete all as specification |
| 69 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints and jointed with adhesive and laid in floors/ trenches/walls (75 mm bore) etc complete all as specification |
| 70 | S&F 110 mm bore PVC (SWR) bends and fixed in position with adhesive complete all as specified and directed |
| 71 | S&F, 75 mm bore PVC (SWR) bends and fixed in position with adhesive complete all as specified and directed |
| 72 | S&F PVC (SWR) vent cowl of 75 mm bore complete all as specified and directed. |
| 73 | S&F PVC (SWR) vent cowl of 110 mm bore complete all as specified and directed. |
| 74 | S&F Salt-glazed stoneware gully traps square or round mouthed etc complete all as specified and directed. |
| 75 | S&F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 76 | S&F stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore pipe complete all as specified and directed. |
| 77 | S&F stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore pipe complete all as specified and directed. |
| 78 | S&F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors concealed type complete all as specified and as directed Note :cutting and chasing is included in the quoted rates |
| 79 | S&F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors concealed type completed all as specified & as directed . Note : cutting and chasing is included in the quoted rates |
| 80 | S&F 25 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc. fixed to walls & ceilings or laid in floors completed all as specified & as directed . Note :cutting &chasing is incl in the quoted rates |
| 81 | S&Frotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed top),double layer construction, ISI marked, hoisted & fixed in position including over flow 450 mm, waste pipe 600 mm long with all fittings such as dead plugs and check nuts etc.of 20 mm dia complete all as spd & as directed. |
| 82 | S&F ball / float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 25 mm bore (minimum weight 25mm-455gms) complete all as specified and as directed. |
| 83 | S & F Gun-metal, globe or gate valve, 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 84 | M&L for hardcore of broken stoneboulder of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 85 | M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protection etc complete all as specified and directed. |
| 86 | M & L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over one coat of alkali resistant primer over 2 mm wall care putty complete all as specified and as directed. |
| 87 | Preparation of newly plastered surfaces on ceilings and applying two coats of white wash complete all as specified and as directed. |
| 88 | M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior weather paint over one coat of primer complete all as spd and as directed. |
| 89 | S & F including fabricating of aluminium powder coated having minimum thickness of powder coating 50 micron for door / window / ventilator frame, shutters and partition including necessary joining cleats, glazing clips, aluminium snap beading having minimum wt 100gm/RM, rubber neoprene gasket, screws, dash fasteners, rawel plug for fixing of screw in wall or floor etc. aluminium sections as approved by GE complete all as specified and directed. |
| 90 | Supply and fixing frosted Sheet Glass4.0 mm thick, Square or Rectagular, area not exc. 0.50 Sqm in Each Pane and fixing to Aluminium Window, Ventilator Shutters, complete all as specified and as directed. |
| 91 | M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc. complete all as specified and directed. |
| 92 | M&L for precast cement concrete type B1, 1:2:4 (20 mm graded stone aggregates) as in cover slab for manholes etc complete all as specified and directed. Note : Reinforcement shall be measured & paid seprately |
| 93 | M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested is cement concrete 1:3:6 type C2, for 200 mm dia pipe completed all as specified and as directed. |
| 94 | S& F 200 mm bore reinforced concrete pipes class NP-2 laid in trenches and jointed complete with collars as directed by Engineer in charge. |
| 95 | Cutting into existing manhole for connecting new drains making good to pipe of dia 200 mm and rendering and cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) incement concrete 1:2:4 type B-1 smooth finished and reforming benching as required. |
| 96 | Material and labour for point wiring for one light /fan/Exhaust fan point controlled by one switch with using 1.5 Sqmm FRLS (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduits (Medium grade) of size not less than 20 mm dia all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with laminated top sheet of 3 mm thick for housing of switchws, sockets, regulators etc including all accessories andusing 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. NOTE :-(I) The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size fixed on ceiling surface with using PVC rawl plugs.(ii)Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A\".(iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thicklaminated sheet fixed with suitable brass screws and cup washers |
| 97 | M & L forswitch flush type single pole one way 5 Amps, 240 volts, white ivory finish complete all as approved |
| 98 | M&L for ceiling rose surface Bakelite two to three terminal, 18 x 50 mm complete all as specified. |
| 99 | Supply & Fix for decorative slim linear LED tube light fitting 01x20 watt light with co extruded polycarbonate body, environmental frendly, energy efficient ready to use pack with all accessories including 01 No 20 watt tube rod and connecting the same to ceiling rose with using copper conductor 24/0.20 flexible PVC sheathsd and fixing arrangement for fixing the light fitting to wall/ roof surface complete all as specified & directed by Engineer in-charge |
| 100 | Supply and fixing Street/Security light fittings 1X35W new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic cover suitable for pole dia O 40mm(Max) with complete (40 mm GI pipe light grade ),clamp,nut-bolt and washers all directed by Engineer-in-Charge. |
| 101 | Supply and fixing of sheet metal enclosure Double door for DB’s4way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires all as directed. |
| 102 | S&F MCB single pole 6 to 32 Amps, \"B\" series10 KA ,240 Volts complete all as specified. |
| 103 | S&F MCB Single pole and neutral 40 to 63 Amps, \"B\" Series240 Volts complete all as specified. |
| 104 | M & L for cutting existing 80/50 mm dia GIpipe line in position for insertion of newtees for branch connection all as specified and as directed. |
| 105 | M&L for stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed of size 25 mm bore, complete all as specified and as directed. |
| 106 | Supply , laying , connecting and testing LT 1100 volt grade electric cable XLPE insulated, screened, PVC bedded, galvanised steel strip armoured (heavy duty) ISI marked with aluminium stranded conductor gross sectional area 16 Sqmm , 4 core laid in trenches / duct / pipe etc complete all as specified and directed . |
| 107 | M & L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed. |
| 108 | M&L bricks for coverunderground cable with one layer of bricks using sub class \"B\" bricks (Old size) laid flat across the cable complete all as specified. Note :Excavation and earth work will be measured separately. |
| 109 | Supplying & Fixing GI Tube medium grade galvanised of dia 50 mm for road crossing of cable and on pole and DB cable as in cable protection complete all as specified and directed. |
| 110 | Supplying & Fixing MCCB 3 Pole, 415 V, fixed type,40 Amps with breaking capacity 16 KA including all connection as required to panel complete all as specified and directed. |
